Using synapse make set the read threshold to 512 and write threshold to 1024 then it will start the inbuilt frandom generator and then you won't have any need for any entropy generator apps.
[TW Kernel][Nadia Kernel][20-September-2014-Discontinued][4.4.2]Emotroid Team
- Thread starter Pafcholini
- Start date
Tnx to both of you, I'll give it a try
---------- Post added at 06:28 PM ---------- Previous post was at 05:48 PM ----------
---------- Post added at 06:28 PM ---------- Previous post was at 05:48 PM ----------
Hi I unsinstalled Seeder and set the thresholds the way you said but now when I receive a call the phone took more the 4-5 seconds till he lit up. Basically when I was able to respond the call ended
Was it better before. As I said earlier it's the problem of incallui. Try the note 2 in call uiTnx to both of you, I'll give it a try
---------- Post added at 06:28 PM ---------- Previous post was at 05:48 PM ----------
Hi I unsinstalled Seeder and set the thresholds the way you said but now when I receive a call the phone took more the 4-5 seconds till he lit up. Basically when I was able to respond the call ended
How is your work going on?
Cant wait for NG4 based roms support.
Tapatapatap Note 2
Last edited:
@Pafcholini for the new NG4 compatibility, have a look at this post by @psndna88 or your kernel won't boot on NG4 base. This is a temporary workaround for the Mali driver updates till Samsung release sources for NG4
Sent from my RPG with auto targeting
Sent from my RPG with auto targeting
Thanks knight! Those days I'll upload the beta r7 based on FNE2 source code. Regards.
Sefix work better for me...just try both.seeder n sefix..but I choose sefix
Sent from my GT-N7100 using XDA Premium 4 mobile app
Been on AGNI, but music via bluetooth was stuttering like hell... With this kernel everything is working flawlessly, thank you
For future what you can also do this. When on stock kernel make a custom backup of the boot image through recovery.
And whenever you wanna switch back to stock kernel. Just clear the init.d folder and restore that backup.
Same here...
Nice kernel.. keep it up... :thumbup:
---------- Post added at 07:37 AM ---------- Previous post was at 07:34 AM ----------
A little 2 request....
1. Can u start Facebook group?
2. Plz show MD5 value on download selection.
Thanks.
Same here...
Nice kernel.. keep it up... :thumbup:
---------- Post added at 07:37 AM ---------- Previous post was at 07:34 AM ----------
A little 2 request....
1. Can u start Facebook group?
2. Plz show MD5 value on download selection.
Thanks.
You may follow on twitter
Yes here on we shall provide it
Sent from my GT-N7100 using Tapatalk
Hello guys!
Everything is fast and smooth for me.No reboots or whatever , and great battery life.Hats of to developers!
But there is a slight problem.
As I have mentioned before , I still get lags when playing 3D games(GTA SA) , or when unlocking the phone with particle effect.
I change back to stock kernel , and everything is smooth and nice.
For example, in GTA SA , gameplay has definately less fps and you can notice a decrease in performace when you pause the game and navigate through the pause screen(start , resume ,options). It is SLOW and I really dont know why.
I thought problem seems to be GPU.I tried to change thresold levels:
I descreased almost to minimum UP Thresold (all levels)
I increased enough but not max DOWN Thresold (all levels again)
Remember , that stock kernel is fine both in GTA SA and particle effect in unlocking.
With that being said , I did NOT change gpu freqs and I really dont want to.
Things definately got better.Now particle effect is smoother and its not a placebo.
(You can try opening synapse and step 1 GPU set 54mhz lowest possible and max out thresold UP level 1 to 100%) <--See?
Opposite results occur a very BAD performance in unlocking phone with particle effect- and even in launcher everything is laggy-)
So, it really depents on that settings.:laugh:
But still it is NOT as smooth as default kernel , which makes me think that maybe some default settings in Synapse are doing the job.
I havent touch anything in Kernel Tweaks nor ABB page. @mat9v please can you give me a hand?
Tried disabling and enabling DVFS still same. Tried changing governors , not much of a difference.
Any ideas?
Anyone have not seen any difference in 3D games?Or in GTA SA pause screen which is the most noticable?
*I dont blame anyone.Developers have done a great job and I give them congratulations for one more time.
I just post my results.
Everything is fast and smooth for me.No reboots or whatever , and great battery life.Hats of to developers!
But there is a slight problem.
As I have mentioned before , I still get lags when playing 3D games(GTA SA) , or when unlocking the phone with particle effect.
I change back to stock kernel , and everything is smooth and nice.
For example, in GTA SA , gameplay has definately less fps and you can notice a decrease in performace when you pause the game and navigate through the pause screen(start , resume ,options). It is SLOW and I really dont know why.
I thought problem seems to be GPU.I tried to change thresold levels:
I descreased almost to minimum UP Thresold (all levels)
I increased enough but not max DOWN Thresold (all levels again)
Remember , that stock kernel is fine both in GTA SA and particle effect in unlocking.
With that being said , I did NOT change gpu freqs and I really dont want to.
Things definately got better.Now particle effect is smoother and its not a placebo.
(You can try opening synapse and step 1 GPU set 54mhz lowest possible and max out thresold UP level 1 to 100%) <--See?
Opposite results occur a very BAD performance in unlocking phone with particle effect- and even in launcher everything is laggy-)
So, it really depents on that settings.
:laugh:But still it is NOT as smooth as default kernel , which makes me think that maybe some default settings in Synapse are doing the job.
I havent touch anything in Kernel Tweaks nor ABB page. @mat9v please can you give me a hand?
Tried disabling and enabling DVFS still same. Tried changing governors , not much of a difference.
Any ideas?
Anyone have not seen any difference in 3D games?Or in GTA SA pause screen which is the most noticable?
*I dont blame anyone.Developers have done a great job and I give them congratulations for one more time.
I just post my results.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
114
*** Disclamer***
Code:Your warranty is now void. We are not responsible for any damage or problems you may have! YOU are choosing to make these modifications.
Introduction
Features:
Installation instructionsCode:[COLOR=DimGray]Based on Samsung Source code N7100XXUFND3 Compiled with GCC 4.7 Linux version 3.0.101 Overclock to 2000MHz Dynamic FSyn control Wolfson Sound GPU OC/uV Advanced TCP control Multicore Power Saving Charging Control CPU Voltage control LED Control ABB Control MDNIE mode Hijack Android Logger mode zzmoove governor Lulzactiveq governor Touchwake Touchboost slide2wake Frandom - random number generator F2FS support Synapse support[/COLOR]
Downloads
Note: Nadians Losing Root after flashing the Kernel, Re-flash the Kernel to gain Root Access.
Previous Version Change log:
September- 20 -2014 nightly r7
- Zzmoove updated to V0.9 beta4
- Corrected L1 cache shift
- Increased force_max_zoneorder to 12
- Disabled multicast when is sleeping
- cleaned some files
- sched_fair: reduced latency
- sched_fair: optimized cgroup_pick_next_task_fair()
- sched_fair: implemented smarter wake-affine logic
- cpuidle: removed cross-cpu IPI by new latency request.
- Added extra free kbutes tunable
- Added Xbox controller support as module
- Added NTFS support as module
- Added support to ppp-widget
- Enabled max freq for busfreq opp
- Added early suspend delay to userspace
- Updated mali driver to r3p2 rel4
- Added key disabler for cypress-touchkey
- Enabled negative mode compatibility of newer MDNIE drivers (Synapse)
- Added new page in Synapse for Live Statistics (Time in states, Uptime,etc.)
- /sbin nadia.sh values moved to init.d
Synapse and all available options:
- LIVE STATISTICS: Time in states, Uptime,etc.
- CPU - GOV: current frequency, CPU and Battery temperatures, current CPU cores online, CPU MAX and MIN frequency, CPU Governor, Governor tunables.
- CPU voltage: separate frequency voltage.
- GPU: GPU scaling freqyency and treshold steps.
- I/O: schedulers, internal storage read-ahead, externalSD read-ahead and Dynamic FSYNC.
- CPU DRIVERS: cpu multicore power saving, cpu idle mode, logger mode, touchboost settings.
- ABB settings
- Kernel tweaks: low memory killer, kernel entropy, panic and panic on oops.
- NETWORK: tcp congestion control, hardering the TCP/IP stack to SYN attack,ignore pings,etc.
- VM-FS: dirty radio, swappiness,etc.
- BATTERY: charge control
- SOUND: Wolfson Sound control
- MDNIE: mdnie mode and scenario
- LED: Blinking effect, led intensity and spee led.
- Touchwake: touchwake config
- INFO-reboot: info about kernel,etc.
August- 1 -2014 nightly r6.1.1
July- 31 -2014 nightly r6.1
July- 25 -2014 nightly r6
July- 09 -2014 nightly r5.1
July- 04 -2014 nightly r5
June- 13 -2014 nightly r4
June 2 nightly r3
May 24 nightly r2 :
May 22 nightly r1 :
F.A.Q
Source code:
Thanks To/CreditsCode:https://github.com/Pafcholini/Nadia-kernel-kk_N7100XXUFND3
@franlov (I want to give special thanks to him for helping me with everything.) @flar2 @franciscofranco @tamirda @Yank555.lu @DerTeufel @wanam @AndreiLux @gokhanmoral @andiP @psndna88 @mat9v @KNIGHT97 @klurosu @mohit14785 @ph03n!x @chobztopz
@ and all users that support the thread and the kernel
You can follow new updates HERE
Hit the "thanks" button if you like my work.
If you think our work it's worth, Invite us for a beer or coffee
XDA:DevDB Information
Nadia nightly Kernel, Kernel for the Samsung Galaxy Note II
Contributors
Pafcholini, Pafcholini, aukhan
Source Code: https://github.com/Pafcholini/Nadia-kernel-kk_N7100XXUFND3
Kernel Special Features:
Version Information
Status: No Longer Updated
Current Stable Version: Nadia nightly r7
Stable Release Date: 2014-09-20
Created 2014-05-22
Last Updated 2015-03-0237Recommended settings & FAQ
Balance between performance and battery
I'm using Synapse (highly recommended)
Read ahead buffer: 1024
IO scheduler: row or zen
Frequency Lock: ON
CPU min freq: 200MHz
CPU max freq: 1600MHz for battery / 1800-1920MHz for performance
CPU governor: Lulzactiveq for both
CPU voltage: -50uV or -100uV (Be careful!! If you low voltages much you can get boot loop or battery drain.)
CPU idle Mode: AFTR+LPA
TCP: westwood for both
Dynamic FSYNC: ON
F.A.Q
Note/Tip: Nadians if there is nything that is missing please PM me I'll add it and in future if you feel anything needs to be added please tag me in that post I shall update it.
Use Synapse Trickster Mod, Devil Tools or Devil Kernel Manager
In case you loose root just flash Super SU
at the beginning of the second post.
thanks to @klurosu
You can use Synapse, trickster mod, devil tools or Devil Kernel Manager
Go to play store and Reinstall affected app again and do a reboot, done. Don't mess/uninstall anything.
OR
If you have titanium backup just restore specific affected app from it.and reboot your device
Thanks to @optimusPRIME
Yes, sometimes pegasusq can cause this.
Switch your governor to either lukzactiveq or Zzmove to have good battery and no skipping music along with smooth performance.
I'll give the reason as to why this happens - Pegasusq is a governor designed to handle multicore systems only and it does an efficient job at the smoothness and battery life with those. But the problem is that it isn't designed to optimize and ramp up the single core systems properly so it tries to push the remaining core into deep sleep, which causes occasional stutter in many background tasks like music. Now for that you'll need a governor which can handle multicore and single core systems at the same time and efficiently, while many governors can do the job, but none is as smooth and optimized as pegasusq in a multicore system. Ondemand is suggested by many for the skipping music problem, but the problem with ondemand is that it was made for single to dual core systems only and this leads to lag and slower ramping of frequencies in a multicore system, but provides a battery life comparable to pegasusq.
While all of this might cause confusion for which governor to choose, lukzactiveq is optimized for more battery but smoothness at same time, and ramps up sliwer but preserves battery life when screen is on; while Zzmove ramps quickly and gives a more snappy experience, the battery life a a bit less.
So choose what you want and enjoy @KNIGHT97 thanks for the detailed explanation.
It's a feature which will allow you to wake your device when it gets locked after screen timeout.
Try this unlock your device wait for it to auto lock not just tap on display and your device will wakeup no need to push the unlock key.
Fix is: flash your desire rom...take a pic with your camera and a video...then reboot in recovery mode and install nadia kernel.
Thanks to @klurosu
Open trickster mod go to 4th screen. There you will find section mpu voltages. There you can change it. @mohit141785
Also try with different governors and I/O schedulers. Increase the SD cache to 1024 or 2048 (more than that has no effect and is wasted) and then try, it can sometimes give higher score in the storage I/O, which increases the total score too @KNIGHT97 thanks for the detailed explanation.
Go to /system/etc/init.d using any root based file manager and delete.
Note: There is an important one related to superSU and if you remove it by mistake you're gonna have trouble with root permissions. @KNIGHT97
Use Wanam Xposed and turn off DVFS or user DVFS Module(standalone) (dynamic voltage and frequency scaling), this feature was kept in touchwiz for benchmark boosting purposes and will confkict with any undervolting and custom governors because it scales the voltages and frequency on regular intervals and is framework integrated, so gets a higher priority than kernel based voltage and scaling controls.
For people who don't know what is DVFS please refer Wikipedia.
check @mattiadj thread for more details. @wanam @mattiadj @KNIGHT97
Yes, you can check @mat9v thread
First make sure you have set on boot and set on boot notification enabled. If after a reboot you see this notification
Then set on boot was run.
You might have scripts, other apps, or ROM settings override Synapse settings. In this case Set on boot delay might help if it's for settings at boot otherwise you need to track down and disable the app/ROM settings
A1: If you're using chainsdd's superuser switch to koush's superuser or SuperSU.
A2: Make sure you are not using another tweaking app or your ROM has setting that overrides our boot configuration. In that case, “Set-On-Boot delay” feature might help.
Otherwise or if you still have problem, see below
A3: If your frequency settings don’t stick, it's because on certain Qualcomm or JB and higher devices, there are certain system services (thermald/mpdecision/project butter) or kernel service that rewrite frequency settings based on current thermal status and/or touch input. Certain custom kernels for your device should include work around for these issues. Unfortunately, it can't be fixed from app side.
A4: DON'T use a reboot app, they effectively force reboot your phone like a system crashes. If you really have to use it, then do it after the apply grace period or disable grace period by setting it to 0.
A5: You might have scripts, other apps, or ROM settings override Trickster MOD settings. In this case Set on boot delay might help.
A6: Don't force close the app (e.g. in Android Settings). It puts the app in a state that it can't start at boot until user starts the app normally again.
A7: Don't use app like Greenifier to greenify Trickster MOD. Doing so will prevent it to run at boot to apply Set-On-Boot.
A8: The Android BOOT_COMPLETED broadcast might be borked because of theme, mods, or after a few dirty flash. In this case reinstall ROM with a data wipe is needed. This solution is confirmed by our users and as this issue is because of deteriorating ROM with ORD, nothing we can do about it on our side.
A9: If it still doesn't work, please do in in app bug report using the option in the app menu right after Set on boot was run. You can enable Set on boot notification to know that.
Source: Trickster MOD FAQ.
Lux Auto Brightness
Here
By default Android logger is disable. Go to Synapse > CPU DRIVERS and enable Logger Mode.34Guys, the project continues. My goal is to have a 100% stable kernel but I need users to comment issues. I will continue with the project until I buy another phone or the section "Galaxy Note 2 Original android development" die.24Guys, I have 60-70% of synapse apk fine. I'll try to make it 100% configurable and then I'll upload the new release.22
