FINALLY COMPLETE! SKINS FOR THE GEAR 2 & GEAR NEO NOW AVAILABLE! SEE LINKS BELOW!
GEAR 2 (BLACK) EBAY:
GEAR 2 (GRAY) EBAY:
GEAR 2 (PLATINUM MATTE) EBAY:
GEAR 2 (GREEN) EBAY:
GEAR 2 (PURPLE) EBAY:
GEAR NEO (BLACK) EBAY:
GEAR NEO (GRAY) EBAY:
GEAR NEO (PLATINUM MATTE) EBAY:
GEAR NEO (GREEN) EBAY:
GEAR NEO (PURPLE) EBAY:
Just finalized the design for the original Galaxy Gear Full Protection Skin. Next will be the Gear 2, Gear 2 Neo & Gear Fit.
Link to original thread:
ORIGINAL THREAD FOR GALAXY GEAR (FIRST GEN.).
GEAR 2, NEO AND FIT WILL BE SIMILAR:
So after another full day of measurements and trial-n-error ... I finally got a finished product, well a few actually ... well a finished product with a few options lol.
Right now I'm rocking the Black skin on my Gear Gen.1 and it looks awesome! SO clean and sleek looking with just enough chrome to set it off with an expensive luxury look, but is now fully protected on all of its sensitive spots. The clasp protector was originally made because as a graphic designer, my wrist settled and was banged on a desk basically 8 hours a day, and that was my cure to keep my watch looking brand new. The full face idea came just for the option to change the color of my watch, the stainless steel looks great and all, but gets played out and sometimes just looks too much ... But I dealt with it, not really having any time to sit and work the schematics for a full face protector. Then it got to the point where I had to hang a towel over the hand railing of the treadmill because every once in a while I would accidently bang my watch off of it while doing my cardio at the gym, luckily the steel has held up well and I've always had one of my screen protectors on it, so it hasn't really been a big deal.
Now with a finished product in hand and on my wrist, I'm just kind of pissed I "back burnered" this project for so long! lol. As I stated before, I know everyone has kind of moved on to the new Gear 2 and the Gear 1 is kind of old news, But I still sell GG1 Screen & Clasp Protectors on a daily basis so I know there's still somewhat of a market for stuff like this. Regardless, I'll have my hands on a GG2 here soon to play around with and while doing so I will have a chance to get the measurements for this type of product for the new Gear 2 and possibly Gear Fit, neither have a speaker in the clasp, But I know the Gear 2 has a stainless steel clasp, and speaker or not, that thing is getting banged up ugly from daily use. So all the GG2 people, stay tuned because that project is just around the corner.
Since I originally dropped the GG1 Screen & Clasp Protectors at the end of last year I've seen a boom in people selling products like it on web-stores and places like eBay & Amazon, I'm not saying in anyway that I invented these, But when I made them, the Gear was fresh on the shelves and I couldn't find anything to protect the exposed/sensitive parts of my $300 investment, and once sold to the general public they really took off! and I thank the people here at XDA especially for being my "Beta Testers" in a way and hopefully the people who bought them here were completely satisfied! It was extremely shocking that something I made for fun/necessity turned into an actual marketable successful product and doing it literally as a one man team was a bit much at times, but awesome! ANYWAYS! the difference between what is currently being offered when it comes to full face protectors for the GG1 and what I was able to put together is, my skin covers the ENTIRE front of the gear, As far as I've seen on the net, they only cover the top and bottom portion of the Gears stainless steel face (If I am missing any out there by all means piss on my parade lol) mine are designed to cover the entire front for full protection as well as the option to change the look of the Gear all together. Pretty cool I think.
With all this being said, the only real challenge I faced upon finishing the design was getting the skin onto the Gear and on correctly, the material used for the skin is very flimsy and hard to maneuver, kind of like putting a screen protector on a phone, but worse! lol.
BUT! within a few minutes I had a solution, which was actually a perfect solution. Not only did it do the trick of being able to easily handle the material while putting the face protector on, it made it extremely easy to keep the skin perfectly straight and allow the installer to line everything up perfect for a perfect hassle-free installation (when done correctly) so I am pretty excited about it, and when these become available to the public (Very Soon!) that installation material will be sold with the protectors.
I've also decided to scratch selling the Clasp Protector by itself now that the Face Protector is done and they will be sold as a set, overall less confusing for the customer and myself when it comes to filling an order and just makes more sense. But now that I have a few color options available (more coming very soon!) I think I would be willing to mix and match colors/patterns with the Face & Clasp Protectors if anyone asked.
On that note as you will see in the pictures I currently have 4 color options available:
- BLACK (Jet-Black)
- PURPLE (Deeper Purple, Almost Plum)
- GRAY (Storm Cloud Gray, somewhat close to the gray color offered by Samsung on the Gear 1)
- GREEN (Darker, sort-of hunter Green)
COLORS/PATTERNS I PLAN TO HAVE VERY SOON:
The original Chrome/Steel color I offered with the GG1 Clasp Protectors which seamlessly matched the stainless on the GG1.
- Carbon Fiber
- Leopard/Zebra Print
And any other Miscellaneous colors/patterns I can get my hands on, just to offer a wide variety and the buyer the option to uniquely express themselves.
And now for the new pictures (Better detail and well-lit pictures to come):
SAME ORIGINAL CLASP PROTECTOR JUST MATCHED WITH FACE SKIN.
And just to show off a little bit of the design aspect of what goes into designing something like this:
Let me know what you think! I cant tell you how happy I am with the final product, it looks awesome in person, these pictures show a great representation, but don't do the final product justice compared to in person, the quality and fit make it look like theres no decal at all, looks like the watch came this way! Very happy!
And again, any and all input appreciated!