Post Reply

HTC One M8 Flashing Rom - set_perm: some changes failed

OP Fizzy99

23rd April 2014, 05:16 PM   |  #1  
OP Junior Member
Thanks Meter: 0
 
2 posts
Join Date:Joined: Apr 2014
Hello,

I am trying to flash a new one onto my new HTC one 2014 Verizon. I grabbed the Viper and Revolution Roms, got S-Off, and TWRP installed however once TWRP seemed like I (or it) cleared the system partition some how without a stock backup (It said 0MB when checking the partitions).
Anyway, continued on my way to flashing...Well, heres some logs... ~.~


Code:
AROMA Installer version 2.70RC2
  (c) 2013 by amarullz xda-developers

ROM Name    : ViperOneM8
ROM Version : 1.3.0
ROM Author  : Team Venom
Device      : HTC One M8
Start at    : Wed Apr 23 08:56:03 2014


    I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
    load_volume_table: Can't get the /proc/emmc table
===========================================
  ViperOneM8 1.3.0 By Team Venom
    about to run program [/sbin/getprop] with 2 args
    m8
    about to run program [/sbin/getprop] with 2 args
    m8
  Be patient - 1st boot may take a while
===========================================
Extracting tools
  Installing Venom Tools
  Extracting Build Tools
    about to run program [/sbin/busybox] with 3 args
  Setting permissions
    about to run program [/sbin/busybox] with 7 args
    Setting ConfigExists to 1 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 3 args
    mount: mounting /dev/block/mmcblk0p45 on /system failed: Invalid argument
    run_program: child exited with status 255
    about to run program [/sbin/busybox] with 7 args
    Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
  Formatting /system
    about to run program [/sbin/mke2fs] with 6 args
    mke2fs 1.41.14 (22-Dec-2010)
    Warning: the fs_type small is not defined in mke2fs.conf
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    5632 inodes, 22528 blocks
    0 blocks (0.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=25165824
    1 block group
    32768 blocks per group, 32768 fragments per group
    5632 inodes per group
    Writing inode tables: 0/1done
    Creating journal (1024 blocks): done
    Writing superblocks and filesystem accounting information: done
    This filesystem will be automatically checked every 29 mounts or
    180 days, whichever comes first.  Use tune2fs -c or -i to override.
  Formatting /cache
    about to run program [/sbin/mke2fs] with 6 args
    mke2fs 1.41.14 (22-Dec-2010)
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    172032 inodes, 688128 blocks
    0 blocks (0.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=704643072
    21 block groups
    32768 blocks per group, 32768 fragments per group
    8192 inodes per group
    Superblock backups stored on blocks:
    32768, 98304, 163840, 229376, 294912
    Writing inode tables:  0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
    Creating journal (16384 blocks): done
    Writing superblocks and filesystem accounting information: done
    This filesystem will be automatically checked every 27 mounts or
    180 days, whichever comes first.  Use tune2fs -c or -i to override.
  Wiping /data except for /data/media
    about to run program [/sbin/busybox] with 3 args
    about to run program [/sbin/busybox] with 3 args
  system files from SD Card
    about to run program [/sbin/sleep] with 2 args
Extracting Files
  Writing System
    about to run program [/sbin/busybox] with 3 args
    about to run program [/sbin/busybox] with 3 args
  Writing Data
Installing Mods
    about to run program [/sbin/busybox] with 7 args
    Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
  Installing Viper Boot
    about to run program [/sbin/busybox] with 7 args
    Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
    about to run program [/sbin/busybox] with 7 args
    Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting ConfigExists to 1 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 5 args
    /sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
    run_program: child exited with status 127
    about to run program [/sbin/busybox] with 7 args
    Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
    about to run program [/sbin/busybox] with 7 args
    Setting KernelExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/dd] with 3 args
    16524+0 records in
    16524+0 records out
    8460288 bytes (8.1MB) copied, 1.438112 seconds, 5.6MB/s
  Kernel Flashed.
Finalizing Install
  Creating toolbox symlinks
  Installing busybox
    set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
    set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
    script aborted: set_perm: some changes failed
  set_perm: some changes failed


Installer Error (Status 7)


End at : Wed Apr 23 08:56:34 2014

set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed


Pretty much the same error with Android Revolution

Code:
  >>> Installing SQLite Tweaks
    set_perm: chown of /system/xbin/sqlite3 to 0 0 failed: No such file or directory
    set_perm: chmod of /system/xbin/sqlite3 to 4755 failed: No such file or directory
    script aborted: set_perm: some changes failed
  set_perm: some changes failed

I have tired this multiple times, resetting to defaults or not. Deselection of features, ect...

Seems to be an issue with my system, not the rom... anyone have any ideas?

Thanks.
23rd April 2014, 06:30 PM   |  #2  
Senior Member
Thanks Meter: 979
 
3,673 posts
Join Date:Joined: Dec 2007
I'm pretty sure I read this problem yesterday. Have you searched?

Make sure you have the correct recovery for your device.
23rd April 2014, 07:36 PM   |  #3  
OP Junior Member
Thanks Meter: 0
 
2 posts
Join Date:Joined: Apr 2014
Quote:
Originally Posted by BenPope

I'm pretty sure I read this problem yesterday. Have you searched?

Make sure you have the correct recovery for your device.

I did search prior to posting, most of the 'solutions' was just to try try again from the beginning. Didn't have that option as at the time I did not have a backup.
But I was able to find one made form unofficial cwm before I switched to TWRP, and started all over.

Looks like it may be fine now.

Thanks!
24th April 2014, 03:28 PM   |  #4  
Member
Thanks Meter: 14
 
95 posts
Join Date:Joined: Apr 2014
Quote:
Originally Posted by Fizzy99

I did search prior to posting, most of the 'solutions' was just to try try again from the beginning. Didn't have that option as at the time I did not have a backup.
But I was able to find one made form unofficial cwm before I switched to TWRP, and started all over.

Looks like it may be fine now.

Thanks!

I had this problem too when I was using M8 TWRP. Verizon variant is named M8_WLV. Using the M8_WLV TWRP I had no issues. XDA thread here: http://forum.xda-developers.com/show....php?t=2717928 Hope that helps.
The Following User Says Thank You to cemmec For This Useful Post: [ View ]
8th June 2014, 09:28 PM   |  #5  
Junior Member
Thanks Meter: 0
 
2 posts
Join Date:Joined: Jun 2013
Similar issue on HTC One m8 GPE, no fix yet
I have similar issue when flashing ROM on my HTC One m8 GPE from play store.

I have unlocked bootloader & s-off and installed TWRP 2.7.0.2

I tried to install ViperOne and Revolution HD (choosing HTC One m8 International variant) many times, and every time the end of the ROM flashing process is symlink: some symlinks failed.

And when I reboot, I got a bootloop into recovery.

I also tried using different custom recovery like CWM and even verizon version of TWRP, but nothing worked.

I've searched back and forth, and don't see to find solutions here.
16th July 2014, 05:52 AM   |  #6  
Junior Member
Thanks Meter: 0
 
14 posts
Join Date:Joined: Sep 2010
Quote:
Originally Posted by gary7135

I have similar issue when flashing ROM on my HTC One m8 GPE from play store.

I have unlocked bootloader & s-off and installed TWRP 2.7.0.2

I tried to install ViperOne and Revolution HD (choosing HTC One m8 International variant) many times, and every time the end of the ROM flashing process is symlink: some symlinks failed.

And when I reboot, I got a bootloop into recovery.

I also tried using different custom recovery like CWM and even verizon version of TWRP, but nothing worked.

I've searched back and forth, and don't see to find solutions here.

I am experiencing this same issue on my VZW M8. I am S off also getting failed revolution hd installs. Any fixes?
16th July 2014, 09:14 PM   |  #7  
Junior Member
Thanks Meter: 0
 
14 posts
Join Date:Joined: Sep 2010
Quote:
Originally Posted by Fizzy99

Hello,

I am trying to flash a new one onto my new HTC one 2014 Verizon. I grabbed the Viper and Revolution Roms, got S-Off, and TWRP installed however once TWRP seemed like I (or it) cleared the system partition some how without a stock backup (It said 0MB when checking the partitions).
Anyway, continued on my way to flashing...Well, heres some logs... ~.~


Code:
AROMA Installer version 2.70RC2
  (c) 2013 by amarullz xda-developers

ROM Name    : ViperOneM8
ROM Version : 1.3.0
ROM Author  : Team Venom
Device      : HTC One M8
Start at    : Wed Apr 23 08:56:03 2014


    I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
    load_volume_table: Can't get the /proc/emmc table
===========================================
  ViperOneM8 1.3.0 By Team Venom
    about to run program [/sbin/getprop] with 2 args
    m8
    about to run program [/sbin/getprop] with 2 args
    m8
  Be patient - 1st boot may take a while
===========================================
Extracting tools
  Installing Venom Tools
  Extracting Build Tools
    about to run program [/sbin/busybox] with 3 args
  Setting permissions
    about to run program [/sbin/busybox] with 7 args
    Setting ConfigExists to 1 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 3 args
    mount: mounting /dev/block/mmcblk0p45 on /system failed: Invalid argument
    run_program: child exited with status 255
    about to run program [/sbin/busybox] with 7 args
    Setting HostsFileExists to 0 in /tmp/VenomSettings.prop
Formatting Partitions
  Formatting /system
    about to run program [/sbin/mke2fs] with 6 args
    mke2fs 1.41.14 (22-Dec-2010)
    Warning: the fs_type small is not defined in mke2fs.conf
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    5632 inodes, 22528 blocks
    0 blocks (0.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=25165824
    1 block group
    32768 blocks per group, 32768 fragments per group
    5632 inodes per group
    Writing inode tables: 0/1done
    Creating journal (1024 blocks): done
    Writing superblocks and filesystem accounting information: done
    This filesystem will be automatically checked every 29 mounts or
    180 days, whichever comes first.  Use tune2fs -c or -i to override.
  Formatting /cache
    about to run program [/sbin/mke2fs] with 6 args
    mke2fs 1.41.14 (22-Dec-2010)
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    172032 inodes, 688128 blocks
    0 blocks (0.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=704643072
    21 block groups
    32768 blocks per group, 32768 fragments per group
    8192 inodes per group
    Superblock backups stored on blocks:
    32768, 98304, 163840, 229376, 294912
    Writing inode tables:  0/21 1/21 2/21 3/21 4/21 5/21 6/21 7/21 8/21 9/2110/2111/2112/2113/2114/2115/2116/2117/2118/2119/2120/21done
    Creating journal (16384 blocks): done
    Writing superblocks and filesystem accounting information: done
    This filesystem will be automatically checked every 27 mounts or
    180 days, whichever comes first.  Use tune2fs -c or -i to override.
  Wiping /data except for /data/media
    about to run program [/sbin/busybox] with 3 args
    about to run program [/sbin/busybox] with 3 args
  system files from SD Card
    about to run program [/sbin/sleep] with 2 args
Extracting Files
  Writing System
    about to run program [/sbin/busybox] with 3 args
    about to run program [/sbin/busybox] with 3 args
  Writing Data
Installing Mods
    about to run program [/sbin/busybox] with 7 args
    Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
  Installing Viper Boot
    about to run program [/sbin/busybox] with 7 args
    Setting CustomizePropExists to 1 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting CarrierPropExists to 1 in /tmp/VenomSettings.prop
Flashing Carrier Tweaks
    about to run program [/sbin/busybox] with 7 args
    Setting MergeBuildProp to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting CarrierIconExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting LauncherPropExists to 1 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting RemoveAppsPropExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting RemoveMediaPropExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting KeyboardsPropExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 7 args
    Setting ConfigExists to 1 in /tmp/VenomSettings.prop
    about to run program [/sbin/busybox] with 5 args
    /sdcard/Venom/Tools/SetSetting.sh: line 2: /system/xbin/sqlite3: not found
    run_program: child exited with status 127
    about to run program [/sbin/busybox] with 7 args
    Setting VenomMods to 0 in /tmp/VenomSettings.prop
Installing Kernel
    about to run program [/sbin/busybox] with 7 args
    Setting KernelExists to 0 in /tmp/VenomSettings.prop
    about to run program [/sbin/dd] with 3 args
    16524+0 records in
    16524+0 records out
    8460288 bytes (8.1MB) copied, 1.438112 seconds, 5.6MB/s
  Kernel Flashed.
Finalizing Install
  Creating toolbox symlinks
  Installing busybox
    set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
    set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
    script aborted: set_perm: some changes failed
  set_perm: some changes failed


Installer Error (Status 7)


End at : Wed Apr 23 08:56:34 2014

set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
script aborted: set_perm: some changes failed
set_perm: some changes failed


Pretty much the same error with Android Revolution

Code:
  >>> Installing SQLite Tweaks
    set_perm: chown of /system/xbin/sqlite3 to 0 0 failed: No such file or directory
    set_perm: chmod of /system/xbin/sqlite3 to 4755 failed: No such file or directory
    script aborted: set_perm: some changes failed
  set_perm: some changes failed

I have tired this multiple times, resetting to defaults or not. Deselection of features, ect...

Seems to be an issue with my system, not the rom... anyone have any ideas?

Thanks.


Your log file looked similar to mine and I tried everything to get these ROM's to install. I had been trying to install the ROM from the SD card and I had nothing else to try so figured I would copy to the internal SD and give it a shot and that fixed the issues and the ROM installed no problem. Hope this solves your install issue too. Thanks
4th August 2014, 07:23 PM   |  #8  
Member
Thanks Meter: 17
 
55 posts
Join Date:Joined: Apr 2014
Donate to Me
More
I am having the same issue on my HTC one m8 verizon version. Trying to flash Android Revolution HD... I've tried having it on internal memory and external and I've made sure I have the right TWRP installed. Every time the install finishes it says set_perm: some changes failed and twrp crashes. Any other ideas?
4th August 2014, 10:39 PM   |  #9  
Member
Thanks Meter: 17
 
55 posts
Join Date:Joined: Apr 2014
Donate to Me
More
In case it's helpful for someone, here's a log file. I also read in another thread that someone had success if they wiped /system before trying to install. I'll see if that helps soon.
Code:
 AROMA Installer version 2.70RC2
  (c) 2013 by amarullz xda-developers

ROM Name    : Android Revolution HD
ROM Version : 10.2
ROM Author  : mike1986
Device      : HTC One (M8)
Start at    : Mon Aug  4 12:27:28 2014


    I:emmc_scan_partitions:[partition_count:0] [allocat_num:50]
    load_volume_table: Can't get the /proc/emmc table
  =================================
  Android Revolution HD by mike1986
  =================================
  >>> Formatting partitions
    about to run program [/sbin/umount] with 2 args
    umount: can't umount /system: Invalid argument
    run_program: child exited with status 1
    about to run program [/sbin/mke2fs] with 6 args
    mke2fs 1.41.14 (22-Dec-2010)
    Warning: the fs_type small is not defined in mke2fs.conf
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    5632 inodes, 22528 blocks
    0 blocks (0.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=25165824
    1 block group
    32768 blocks per group, 32768 fragments per group
    5632 inodes per group
    Writing inode tables: 0/1done
    Creating journal (1024 blocks): done
    Writing superblocks and filesystem accounting information: done
    This filesystem will be automatically checked every 23 mounts or
    180 days, whichever comes first.  Use tune2fs -c or -i to override.
    about to run program [/sbin/mount] with 2 args
    mount: mounting /dev/block/mmcblk0p47 on /cache failed: Device or resource busy
    run_program: child exited with status 255
    about to run program [/sbin/mount] with 2 args
    mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
    run_program: child exited with status 255
    about to run program [/tmp/wipe.sh] with 1 args
  >>> Mounting partitions
    about to run program [/sbin/mount] with 2 args
    about to run program [/sbin/mount] with 2 args
    mount: mounting /dev/block/mmcblk0p48 on /data failed: Device or resource busy
    run_program: child exited with status 255
  >>> Cleaning process
    about to run program [/tmp/clean.sh] with 1 args
  >>> Writing Data & System
    about to run program [/sbin/busybox] with 5 args
    about to run program [/sbin/sync] with 1 args
  >>> Copying U.S. Verizon related files
  >>> Installing Google Chrome
  >>> Installing Google Maps & Google Street
  >>> Installing Google Music
  >>> Installing Google Plus
  >>> Installing Google Now
  >>> Installing Google Keep
  >>> Installing Google Hangouts
  >>> Installing Google YouTube
  >>> Installing Google Drive
  >>> Installing ES File Explorer
  >>> Installing Facebook
  >>> Installing Adobe Flash Player
  >>> Installing Adobe Reader
  >>> Installing Twitter
    about to run program [/sbin/busybox] with 3 args
    mkdir: can't create directory '/system/bin/.ext': No space left on device
    run_program: child exited with status 1
    about to run program [/sbin/busybox] with 4 args
    cp: can't stat '/system/xbin/su': No such file or directory
    run_program: child exited with status 1
  >>> Installing Sense 6 Toolbox & Xposed
  >>> Creating toolbox symlinks
  >>> Creating additional symlinks
  >>> Installing busybox
    set_perm: chown of /system/xbin/busybox to 0 1000 failed: No such file or directory
    set_perm: chmod of /system/xbin/busybox to 755 failed: No such file or directory
    script aborted: set_perm: some changes failed
  set_perm: some changes failed


Installer Error (Status 7)


End at : Mon Aug  4 12:28:54 2014
EDIT:
Wiping /system before flashing the rom was a success! No hitches at all, and had it up and running. However, since it's a verizon device, apparently the firmware isn't out yet. Because of this I had no wifi and really long boot times. I'm gonna flash back to stock until the firmware is released with the next verizon software update. Happy flashing everyone!
Last edited by Flylowguy; 5th August 2014 at 12:46 AM.
4th September 2014, 04:13 PM   |  #10  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Sep 2014
The solution that worked for me
I was struggling with this issue while trying to install several ROMs. The reason I was getting this is because I was starting with a GPE phone and was trying to install ROMs that we based on HTC's Sense build (Viper, ARHD, etc...)

The reason is that the partition sizes are different between GPE and stock HTC. I believe that you will encounter the same issue if you installed the GPE RUU on your phone and are trying to revert.

I followed the instructions found here: http://forum.xda-developers.com/show....php?t=2733523 which required me to flash the firmware from what I had back to an HTC version (after this step I got the HTC logo upon restart instead of the google logo) Flashing this firmware must set the partition sizes to the appropriate values because after this I was able to install the Viper ROM without issue.

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in One (M8) Q&A, Help & Troubleshooting by ThreadRank