There are a number of ways the easiest is to download one of the 20a/20b build you want to flash. Then flash the zip file and after that is done DO not reboot yet. Next flash the kernel you want and reboot. I've attached the 18a kernel all I did was borrow a zip from Demetris' kernel and then replace the kernel he had in the file with the 18a kernel, so his script might say GPE-ish kernel but it will flash the 18a kernel (I forget what it says). When you reboot you should notice the better gamma setting. The version number of the kernel will stay the same LG was sneaky like that.
Stock LG Leaked Build KOT49I.V50018a + BusyBox + Root
for LG G Pad 8.3 V500 ONLY!
Android 4.4.2 KitKat
Use this at your own risk. I have personally flashed and tested this build on my own device successfully.
I am not responsible for any damage or data loss encountered due whatever reason.
Please ensure that you make a full backup of your system before flashing anything.
Mirror (please use main download link above when possible):
LG-V500_KOT49I.V50018a_Stock-BB-Rooted.zip (hosted on id10terror.net)
NEW! Great Install Tutorial Video by @Tomsgt !
Many Thanks to
@Aeras76 - for providing leaked TOT file
@Jessooca - for posting the links and mirrors
@Chainfire - for SuperSU and install script
@jazzruby - BusyBox install script
@Tomsgt - for his cool install tuturial video
I have already installed the drivers for LG on my laptop but still no luck
I have rooted my V500 tablet.
Running STOCK LG G Pad 4.4.2
Androi Version: 4.4.2
Kernel Version: 3.4.0
Build Number: KOT49I.V50020d
Software Version: V50020d
It seems like all theTWRP available online is for users coming from 4.2.2. I alt ready have stock 4.4.2 but I want to install CM11 but no way to install recovery ?
|gpad, kitkat, v500|
|Thread Tools||Search this Thread|