[ROM] [4.4.4] [OFFICIAL] LiquidSmooth v3.1 - Note 2 Sprint
- Thread starter TheBr0ken
- Start date
-
- Tags
- development
R u using this new unofficial? I ask cuz it would be for a friends phone not my own....he's on cm nightlies as of now..
sliverr7x
Senior Member
OK...tell me how its working for u..volume , camera , how's data, and what kernel are you using.. Like I said is for a friend and I want him on something solid thanks on advance
No none that I see wished I could over clock the kernel for him but I don't know of another kernel that would work with this
Thanks for letting me know. Can you comment on the battery life?
I don't know if it's the Baked rom but feel like get good battery life with it but really want to flash this one. What are your thoughts? Still miss some of the Bluetooth integration though. Plus seems like I can't upgrade the Google things.
Hard to say has it isn't my phone and I don't have it around enough to know..has for Google apps updating u may need to clear play store cache and data
I'm on 3.1 and my microphone doesn't work unless I use speakerphone. Anyone else have this problem?
Mine works fine. Just started using it a week ago. Might need a clean wipe
Sent from my SPH-L900 using XDA Free mobile app
Sent from my SPH-L900 using XDA Free mobile app
Thank you good sir, flashed this morning and running fantastic. What an amazing rom liquid is & always has been.
Sent from my SPH-L900 using Xparent BlueTapatalk 2
No Mobile Network after CWM Backup/Restore
This is something that has happened for me going back to prior andriod versions of apparently AOSP roms. I backup the rom in CWM (or TWRP in the past) and (in this most current case) installed a non-stock TW rom. When I restore my backup there are no signal bars and based band is "unknown" in settings.
I've tried the following:
1. manually formatting the usual partitions; data, cache, and system and also wiped dalvik.
2. flashing several of the newer modems from Rwilco's repo.
3. flashing garwynn/evilkoncepts ljc carrier restore.
4. flashing the rom itself and then restoring over that without any wiping and vice versa
5. flashing the rom itself and doing advanced restore and only install data, and on a seperately try only installing system
With the latter two (4, 5) it brings back data services but the back button doesn't work and nor does it work when i turn on the onscreen buttons and in one instance the home button did not work as well. when doing #4 it will also cause things to be missing in the drop down menus.
Any ideas for a fix on this?
This is something that has happened for me going back to prior andriod versions of apparently AOSP roms. I backup the rom in CWM (or TWRP in the past) and (in this most current case) installed a non-stock TW rom. When I restore my backup there are no signal bars and based band is "unknown" in settings.
I've tried the following:
1. manually formatting the usual partitions; data, cache, and system and also wiped dalvik.
2. flashing several of the newer modems from Rwilco's repo.
3. flashing garwynn/evilkoncepts ljc carrier restore.
4. flashing the rom itself and then restoring over that without any wiping and vice versa
5. flashing the rom itself and doing advanced restore and only install data, and on a seperately try only installing system
With the latter two (4, 5) it brings back data services but the back button doesn't work and nor does it work when i turn on the onscreen buttons and in one instance the home button did not work as well. when doing #4 it will also cause things to be missing in the drop down menus.
Any ideas for a fix on this?
What recovery type and version are you using? Philz 6.07.9 is one of the best. Also the new twrp 2.8.0.0 is a good version to use.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Question and again this isn't for me not my phone, twrp is good to go now? I tried one before an older version and couldn't get data took work and was told it was recovery...
sliverr7x
Senior Member
Just to be safe and know that everything is going to work just use Philz recovery
Sent from my SPH-L900 using Tapatalk
Would you happen to have a link to the exact one you use? And thanks for replying
Right here, teamw.in/project/twrp2/117
Try again, http://teamw.in/project/twrp2/117
Sent from my SPH-L900 using Xparent Green Tapatalk 2
---------- Post added at 11:15 PM ---------- Previous post was at 11:13 PM ----------
[/COLOR]
Thanks for taking a look. I am using CWM v6.0.4.3 when getting this problem. I also tried TWRP 2.7.1.0 and 2.7.0.0 and neither would boot into recovery; just kept getting the "samsung galaxy note 2" start screen. TWRP 2.6.3.7 did boot up but I still got the same problem on restore; no mobile network service.
I see TWRP showing 2.8 on their main page but I do not see it available in their downloads section for the SPH-L900.
Can someone confirm that Philz backup/restore works without issue for the L900 on these AOSP roms?
[/COLOR]
Thanks for taking a look. I am using CWM v6.0.4.3 when getting this problem. I also tried TWRP 2.7.1.0 and 2.7.0.0 and neither would boot into recovery; just kept getting the "samsung galaxy note 2" start screen. TWRP 2.6.3.7 did boot up but I still got the same problem on restore; no mobile network service.
I see TWRP showing 2.8 on their main page but I do not see it available in their downloads section for the SPH-L900.
Can someone confirm that Philz backup/restore works without issue for the L900 on these AOSP roms?
Last edited:
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
16
LiquidSmooth is an aftermarket firmware based on the Android Open Source Project.
Dedicated to providing users with smooth, stable and fast ROMs. A Lightweight modified AOSP base, and then add the features you crave!
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device.
We ask that you do your part to know your device and know how to recover from problems before you flash!
Liquid0624
Deadman96385
jsnweitzel
Somber73
TheBr0ken
CPA-Poke
Cdub50
Code:Linaro 4.9 GCC Toolchain O3 Strict-Aliasing & ISO C++11 Mode ARM Optimized String Handling Routines Linaro and Code Aurora Optimaztions Slims DPI on the fly Custom animation controls TRDS 3.0 (Liquid Blackout in settings) Active Display Slims QuickSettings Halo (Renamed to bubble in settings) Ram Bar T-Mobile Theme Engine Privacy Guard Built in SuperUser Working wifi Tethering Cell Broadcasts Slims Configurable Power Menu Slims Configurable Nav Bar Custom animation controls (Listview) LockScreen Notifications And way more than this...
Code:[url="http://pastebin.com/WNTJMS6k"]LiquidSmooth v3.0 Full list of features[/URL]
Code:[url="http://github.com/LiquidSmooth"]LiquidSmooth Github[/URL]
Code:[url="http://www.drdevs.com/devs/teamliquid/Official"]Stable Download[/URL] [url="http://www.drdevs.com/devs/teamliquid/Nightly/Note_2_Sprint/"]Nightly Download[/URL] [url="http://www.drdevs.com/devs/teamliquid/Gapps/"]Gapps Download[/URL]
XDA:DevDB Information
LiquidSmooth v3.1 - Note 2 SPR, ROM for the Sprint Samsung Galaxy Note II
Contributors
TheBr0ken
Version Information
Status: Stable
Current Stable Version: v3.1
Stable Release Date: 2014-07-14
Created 2014-04-19
Last Updated 2014-08-221007/04/14 build is ready!
Get it via ota or OP downloads link
Clean flash highly suggested as there are a lot of changes in here.
Hover & Pocket Mode
These have been fixed now in this build
New Theme Engine
Lots of bugfixes and patches have been added
Reset Battery Stats
Option to wipe your battery stats has been added
Roboto Fonts
New roboto fonts included from Android L preview
Google Camera
This works with our current tool chain ask and you shall receive
Bug fixes & Performance
Lots of fixes and fixed memory leaks resulting in performance increases
Identity Icons
This adds different avatars to contacts without pictures that are better then default
Liquid Settings
All the advanced settings in main settings layouts have been redone and organized
See Through and Blur
Located in lock screen style menu and if you enable these your lock screen wallpaper is overridden85
Open dialer settings scrool down to voicemail open click on setup erase the number and put your in it
If I can help don't be afraid to hit the thanks button
Sent from my SPH-L900 using Tapatalk
