AOSP for Galaxy S4 LTE-A : CM, AOSB, Carbon, LS, SlimKat, Temasek, crDroid
- Thread starter arter97
- Start date
I'm guessing follow the instructions on page 1
Note: Be careful though there's something wrong with Bluetooth and Radio on latest builds so best to wait until arter figures out what's causing it.
Updated with Bluetooth crash fixes with an updated kernel.
With the new kernel, encryption should work with ext4 file-system.
I haven't tested those out due to lack of device here..
With the new kernel, encryption should work with ext4 file-system.
I haven't tested those out due to lack of device here..
Great news! Thank you for your hard work! Keep it up! [emoji106]Updated with Bluetooth crash fixes with an updated kernel.
With the new kernel, encryption should work with ext4 file-system.
I haven't tested those out due to lack of device here..
For me, everything is FANTASTIC on latest Temasek's rom :good::good::good:
e330s
Downloaded Arte 3.1 kernel for liquidsmooth on GSM phone - no problem.
I then updated to Arte 3.2. The wifi and connection to the service provider are not working.
I can I make it work?
Downloaded Arte 3.1 kernel for liquidsmooth on GSM phone - no problem.
I then updated to Arte 3.2. The wifi and connection to the service provider are not working.
I can I make it work?
Test running on Temasek rom, on start there was few UI force closes when going around settings, after set of "non set" setting values it stop doing those UI FC's.
Did also Dalvik wipe after those fc's, let's see if those were just hiccups of start..
More exploring tomorrow..
Edit:
Temasek v153 goes stable with 3.2 kernel and 4.4 bootloader, Dalvik, ext4, arter97 PhilZ recovery under the hood.
Battery lasts longer than previous kernel + CM, 6 hour SOT is easily achieved.
More later..
Did also Dalvik wipe after those fc's, let's see if those were just hiccups of start..
More exploring tomorrow..
Edit:
Temasek v153 goes stable with 3.2 kernel and 4.4 bootloader, Dalvik, ext4, arter97 PhilZ recovery under the hood.
Battery lasts longer than previous kernel + CM, 6 hour SOT is easily achieved.
More later..
Last edited:
Latest CM rom and Arter 3.2 kernel appears far more stable than LS. BT reboots almost eliminated, had one in the past few days while using my car bt, used to be a daily occurrence with LS and 3.1 kernel.
Completely agree about battery performance, its exceeding my expectations, a little better than what I was getting with LS.
Great work Arter97, appreciate it. Will continue monitoring BT performance.
Also worth mentioning that the phone outscored the prev Antutu benchmark of 38.6 k by a thousand points.
Completely agree about battery performance, its exceeding my expectations, a little better than what I was getting with LS.
Great work Arter97, appreciate it. Will continue monitoring BT performance.
Also worth mentioning that the phone outscored the prev Antutu benchmark of 38.6 k by a thousand points.
Last edited:
All except developer have i9506, whole thread is for gt-i9506.
Sent from my SHV-E330S using XDA Free mobile app
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
48
AOSP for Galaxy S4 LTE-A
/* Info */
Portion of AOSP ROMs to Galaxy S4 LTE-A.
These ROMs are based on Galaxy Note 3(hlte)'s ROMs.
For more info, visit http://www.cyanogenmod.org
/* Disclaimer */
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
/* Supported device */
Galaxy S4 LTE-A SK (SHV-E330S, ks01lteskt)
Galaxy S4 LTE-A KT (SHV-E330K, ks01ltektt)
Galaxy S4 LTE + International (GT-I9506, ks01lte)
/* Unsupported device */
Galaxy S4 LTE-A LG (SHV-E330L, ks01ltelgt)
Galaxy S4 WITHOUT Snapdragon 800 SoC
/* Known issues */
Some users are reporting CarbonROM is not bootable
/* What you need to know */
Kernel is not included! Make sure to download and install kernel specifically made for CyanogenMod
This is an unofficial portion of CyanogenMod
'Opensource' does not mean 'no-respect'
Leave credits to original developers
This is only tested on
- SHV-E330S coming from stock Android 4.4 KitKat
- SHV-E330K coming from stock Android 4.4 KitKat
Other variants, other OS may not be fully compatible
/* Thanks to */
@sktjdgns1189 @sleepy
hsk from Matcl @Yank555-lu @temasek71 @solk2
/* Credits */
AOSB : @codexc and rest of the AOSB ROM developers and contributers
http://xdaforums.com/showthread.php?t=2600648
crDroid : Cristiano Matos and @firebird11
http://xdaforums.com/galaxy-note-3/development/rom-crdroid-t2840030
Temasek : @temasek71
http://xdaforums.com/showthread.php?t=2687074
SlimKat : SlimTeam and rest of the SlimKat ROM developers and contributers
http://slimroms.net/index.php/team
http://xdaforums.com/showthread.php?t=2748895
LiquidSmooth : @deadman96385 and rest of the LiquidSmooth ROM developers and contributers
http://xdaforums.com/showthread.php?t=2590542
Carbon : @CarbonDev and rest of the CarbonROM developers and contributers
http://xdaforums.com/showthread.php?t=2630134
/* Contact */
Email : qkrwngud825@gmail.com
Twitter : @arter97_dev
/* Downloads */
Please disable AdBlocker if you appreciate my work
http://www.arter97.com/s4_cm.htm
/* Installation */
1. Install ClockworkMod(or PhilZ) recovery
2. Put ROM, kernel and Gapps on you SD card
3. Enter recovery and do a factory reset
4. Flash ROM, kernel and Gapps in order
5. If you're an i9506 user, flash the fix file from here : https://s.basketbuild.com/devs/arter97/S4/ROM/AOSP/i9506_patch
XDA:DevDB Information
AOSP for Galaxy S4 LTE-A, ROM for the Samsung Galaxy S 4
Contributors
arter97, sktjdgns1189, Sleepy
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kernel specifically designed for CyanogenMod
Based On: AOSP
Version Information
Status: Testing
Created 2014-03-23
Last Updated 2014-11-227Kernel is updated to 3.4 and everyone is encouraged to update.
3.4
Random reboots on Bluetooth connected FIXED
BFQ I/O scheduler updated to v7r6
Misc kernel stability improved
Thermal throttling misbehavior fixed
Generic ARM speed improvements
CPU hotplugging latency improved
f2fs compatibility with sdcardfs improved77
1. That thread was not meant to be any uploads. It's planely for status reports.
2. I don't see any previous CyanogenMod porting status reports. Have anyone successed boot and uploaded any screen-shots?
3. Thanks is a measurement of "how many people are anticipating". If you don't want to, don't press it then.
4. I haven't done any uploads since you and rest of XDA people won't enjoy buggy ROM. And I don't want to get any bug reports on those status.
5. Respecting devs eh? Think before you post dude.
