Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

My way to solve Telephony Problems

OP cainiao

18th May 2014, 11:51 AM   |  #1  
OP Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Mar 2014
Just like many people says the telephony problems maybe cause by hardwear and would go by times,but some users still suffering the Telephony Problems.I am here to share my way to solve the Telephony problems,overclock the lowest frequency from 300 to 400,and reduce the lowered second frequency from 600 to 400,after overclock the mpu_opps wolid like this
Quote:

mpu_opps[4] rate=1000000000 opp_id=4 vsel=50 sr_adjust_vsel=50
mpu_opps[3] rate=800000000 opp_id=3 vsel=40 sr_adjust_vsel=40
mpu_opps[2] rate=400000000 opp_id=2 vsel=28 sr_adjust_vsel=28
mpu_opps[1] rate=400000000 opp_id=1 vsel=18 sr_adjust_vsel=18

,and the telephony problem would go. If this could help those who suffered telephony problems ,just give me some feedback
About the OverClock,you should create a txt file and renamed it to "10overclock" and put it into /system/erc/init.d,here is my code on my "10overclock"
Quote:

#!/system/bin/sh
#
echo "0 1000000" > /proc/overclock/freq_table
echo "1 800000" > /proc/overclock/freq_table
echo "2 400000" > /proc/overclock/freq_table
echo "3 400000" > /proc/overclock/freq_table
echo "1 400000000 20" > /proc/overclock/mpu_opps
echo "2 400000000 30" > /proc/overclock/mpu_opps
echo "3 800000000 42" > /proc/overclock/mpu_opps
echo "4 1000000000 56" > /proc/overclock/mpu_opps

Last edited by cainiao; 31st May 2014 at 06:23 PM. Reason: maked a mistake for "echo "1 8000000" > /proc/overclock/freq_table",it should be "echo "1 800000" > /proc/overclock/freq_ta"
24th May 2014, 05:44 AM   |  #2  
sumeet_on_line's Avatar
Junior Member
Flag Pune
Thanks Meter: 4
 
19 posts
Join Date:Joined: Jul 2013
More
Thank for the suggestion will try, Now my lowest freq is 600 and phone is working good.
But i have one doubt the second highest freq say 800 is almost never used by Defy+ do you have any idea on this.

Sent from my MB526 using XDA Premium 4 mobile app
28th May 2014, 03:56 PM   |  #3  
Stoku's Avatar
Member
Thanks Meter: 26
 
50 posts
Join Date:Joined: Feb 2014
Donate to Me
More
Quote:

echo "0 1000000" > /proc/overclock/freq_table

There's missing one zero.
9th November 2014, 02:54 PM   |  #4  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Nov 2014
Thumbs up
this really works but can i change to 1.2ghz
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes