ATT-5.12.502.2-TWRP-stock-unrooted + Guru Reset

Search This thread
By:
Advanced…
C

caliboy99

Senior Member
Jun 7, 2010
185
1
Sunny California
C

caliboy99

Senior Member
Jun 7, 2010
185
1
Sunny California
clsA said:
yes
relock not needed with s-off
Click to expand...
Click to collapse

Ok thanks.

If this works this time around i will be back to stock. Should i just flash the firmwares 4.xx, 5.xx as before?

Finally after i flash the ruu.zip will i have to redo s-off?

---------- Post added at 03:23 PM ---------- Previous post was at 02:46 PM ----------

Well the ruu.zip worked im back to 3.17
Tried to flash 4.xx firmware but still getting fail 32 header error..
Should i just flash the 4.xx zip? or should i just update via the setting on the phone??
 
clsA

clsA

Senior Member
Aug 28, 2010
9,926
3,547
Central Florida
caliboy99 said:
Ok thanks.

If this works this time around i will be back to stock. Should i just flash the firmwares 4.xx, 5.xx as before?

Finally after i flash the ruu.zip will i have to redo s-off?

---------- Post added at 03:23 PM ---------- Previous post was at 02:46 PM ----------

Well the ruu.zip worked im back to 3.17
Tried to flash 4.xx firmware but still getting fail 32 header error..
Should i just flash the 4.xx zip? or should i just update via the setting on the phone??
Click to expand...
Click to collapse

see if you can get the OTA update or use the 4.x RUU
 
  • Like
Reactions: caliboy99
P

poolproj

Member
Jan 8, 2015
10
0
So you have a bunch of different links in this post, are they all different? Do I need them all? What if my only way to communicate with my phone is through the TWRP and Command Prompt... For example, I can't just copy the .ZIP files to a folder location due to the fact that my phone doesnt connect to HTC Sync... I just want to put Android back on my HTC... I feel like this is what I need but I'm so dam confused with all your different links, and everything...

I can use TWRP, and Command Prompt, and ADB... But after my phone loads the HTC Screen on startup.. It proceeds to a Black Screen... and then stays on that screen until I go back to Fastboot to power down, or use my TWRP to power Down...

I Just want ANDROID ON MY PHONE... Why cant I just figure this out already... I am stuck and confused.. Please CLARIFY this for me..
 
majmoz

majmoz

Senior Member
Oct 18, 2010
1,439
417
Sonoita
poolproj said:
So you have a bunch of different links in this post, are they all different? Do I need them all? What if my only way to communicate with my phone is through the TWRP and Command Prompt... For example, I can't just copy the .ZIP files to a folder location due to the fact that my phone doesnt connect to HTC Sync... I just want to put Android back on my HTC... I feel like this is what I need but I'm so dam confused with all your different links, and everything...

I can use TWRP, and Command Prompt, and ADB... But after my phone loads the HTC Screen on startup.. It proceeds to a Black Screen... and then stays on that screen until I go back to Fastboot to power down, or use my TWRP to power Down...

I Just want ANDROID ON MY PHONE... Why cant I just figure this out already... I am stuck and confused.. Please CLARIFY this for me..
Click to expand...
Click to collapse
  • clsA just provided options for those who are in different situations. Since, you have TWRP installed you can use the first link which is the Guru_Reset for your phone. If you have a good wifi connection you can download it directly to your phone and install it within TWRP. The instructions for using the Guru_Reset is the second link.
  • If you are having issues with HTC Sync then take a look at this post by nkk71
 
You must log in or register to reply here.

Similar threads

homeslice976
[DEBLOAT] Remove ATT Bloatware Stock/Rooted [Flashable]
Replies
97
Views
78K
T
todogamer
bdorr1105
[HOW TO] ADB Sideload/Push if you Wipe Internal Storage & No ROM to Flash [19 May 15]
Replies
182
Views
427K
O
ORIGINALMAN2
Scott
  • Locked
[ROM][9/17] - CleanROM 6.0 -★| 4.3 | Fast | Smooth | Clean | For the AT&T Purist! |★-
Replies
3K
Views
318K
Scott
Scott
hasoon2000
  • Locked
[TOOL] HTC One (AT&T) All-In-One Toolkit V3.1 [7-28-2013] [PERM ROOT][Noob-Proof]
Replies
283
Views
314K
kinfauns
kinfauns
h8rift
[ROM][NIGHTLIES][JB 4.2.2] CyanogenMod 10.1 for AT&T HTC One - m7att
Replies
813
Views
249K
M
murky024

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 14
    clsA
    clsA
    Edit: I have also uploaded a Guru_Reset of this if anyone is interested (Thanks to @crushalot)
    Download it Here

    for instructions look here >> http://xdaforums.com/showthread.php?t=2358738

    WARNING!!! include optional flashable radio.


    ..here is the Stock Nandroid before the phone was rooted

    http://www.androidfilehost.com/?fid=23501681358543596
    MD5: b01ad6da065b19c7aff36f77724a5b74

    Extract zip, copy 'HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted' folder to /sdcard/TWRP/BACKUPS//HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted

    For complete stock Say no to installing Root when exiting TWRP and Flash the Stock Recovery
    It's also recommended to Factory Reset in TWRP after Restoring the Firmware

    http://www.androidfilehost.com/?fid=23501681358543599
    MD5: 1a8b1482d4525488c89335df07dc24f2

    reboot into fastboot USB
    fastboot flash recovery 5.12.502.2.recovery.img
    fastboot erase cache
    fastboot reboot

    Be Very Careful with the firmware posted below, I actually put my HTC One into QHSUSB_DLOAD Flashing this. I was able to fix it (Thanks to dexter93) but be very careful and do not flash a 3.xx.502.x firmware with the one posted below !!

    http://xdaforums.com/showthread.php?t=2770684

    This will fix devices which were bricked due to firmware incompatibility. This can be caused with the way HTC handles the firmware updates in it's m7's OTAs. If you've been flashing from a 3.x firmware to a 5.x firmware via OTA, or manually, you most likely have a device stuck in QHSUSB_DLOAD. This tool is for you
    Click to expand...
    Click to collapse

    For Completeness here's the 5.12.502.2.firmware.zip

    http://www.androidfilehost.com/?fid=23501681358543602
    MD5: 4d671edd6bcf1876c44c3798aaaebb0c

    Flash with fastboot oem rebootRUU
    fastboot oem rebootRUU
    fastboot flash zip 5.12.502.2.firmware.zip
    fastboot flash zip 5.12.502.2.firmware.zip
    View
    3
    clsA
    clsA
    rayndog3 said:
    One other questin guys, if I go to bootloader now, select recovery, it goes to a black screen. then a triangle with a question mark shows up. does that mean the stock recovery isn't loaded in? I used the guru reset, I thought that would put the stock recovery in.
    Click to expand...
    Click to collapse

    the black screen is stock recovery
    hit volume up and down and power to see the menu in stock recovery
    View
    1
    clsA
    clsA
    kml.krk said:
    Hey, quick question:
    do I need S-Off for this to work?
    Click to expand...
    Click to collapse

    no, I don't think so
    View
    1
    T
    thehumanslayer12
    clsA said:
    As the title says ..this is the Stock Nandroid before the phone was rooted

    Edit: I have also uploaded a Guru_Reset (Thanks to @crushalot) of this if anyone is interested just shoot me a PM

    http://www.androidfilehost.com/?fid=23501681358543596
    MD5: b01ad6da065b19c7aff36f77724a5b74

    Extract zip, copy 'HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted' folder to /sdcard/TWRP/BACKUPS/<serialnum>/HTCOne-32GB-ATT-5.12.502.2-TWRP-stock-unrooted

    For complete stock Say no to installing Root when exiting TWRP and Flash the Stock Recovery

    http://www.androidfilehost.com/?fid=23501681358543599
    MD5: 1a8b1482d4525488c89335df07dc24f2

    reboot into fastboot USB
    fastboot flash recovery 5.12.502.2.recovery.img
    fastboot erase cache
    fastboot reboot

    Be Very Careful with the firmware posted below, I actually put my HTC One into QHSUSB_DLOAD Flashing this. I was able to fix it (Thanks to dexter93) but be very careful and do not flash a 3.xx.502.x firmware with the one posted below !!

    http://xdaforums.com/showthread.php?t=2770684



    For Completeness here's the 5.12.502.2.firmware.zip

    http://www.androidfilehost.com/?fid=23501681358543602
    MD5: 4d671edd6bcf1876c44c3798aaaebb0c

    Flash with fastboot oem rebootRUU
    fastboot oem rebootRUU
    fastboot flash zip 5.12.502.2.firmware.zip
    fastboot flash zip 5.12.502.2.firmware.zip     << Yes Two times (First time updates hboot)
    fastboot reboot
    Click to expand...
    Click to collapse

    Worked nicely, thanks.

    Edit: Also, it's very very very recommended to Factory Reset in TWRP after Restoring the Firmware. If not done right after Restore, the device may malfunction in some areas, and may (very little) lead to Bricking. I have done this before, when flashing the USA Firmware Version of HTC One's Sense 6. Had to return to Stock due to some recent news in my Data, not connecting to the AT&T Towers, and other stuff. That being said, I've done the old fastboot oem lock and relocked my bootloader, and never again will I ever flash a ROM or anything on my device. Thanks again.

    Code: 
    C:\Program Files (x86)\Android\sdk\platform-tools>fastboot flash recovery 5.12.5
02.2.recovery.img
target reported max download size of 1514139648 bytes
sending 'recovery' (12426 KB)...
OKAY [  1.482s]
writing 'recovery'...
OKAY [  0.891s]
finished. total time: 2.373s

C:\Program Files (x86)\Android\sdk\platform-tools>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [  0.048s]
finished. total time: 0.048s

C:\Program Files (x86)\Android\sdk\platform-tools>fastboot reboot
rebooting...

finished. total time: 0.034s
    View
    1
    clsA
    clsA
    caliboy99 said:
    Ok thanks.

    If this works this time around i will be back to stock. Should i just flash the firmwares 4.xx, 5.xx as before?

    Finally after i flash the ruu.zip will i have to redo s-off?

    ---------- Post added at 03:23 PM ---------- Previous post was at 02:46 PM ----------

    Well the ruu.zip worked im back to 3.17
    Tried to flash 4.xx firmware but still getting fail 32 header error..
    Should i just flash the 4.xx zip? or should i just update via the setting on the phone??
    Click to expand...
    Click to collapse

    see if you can get the OTA update or use the 4.x RUU
    View

New posts