FORUMS

Index Project For XDA Device Subforums

Another ambitious project from the collaborative efforts of Recognized Contributors and Forum … more

The Atlas of XDA

A few weeks ago, we asked you “How Does Your Location Affect Your Life As A Power User?”. In the days that … more

New Snapdragons: Some Context & Contrast

It hasn’t been a good year for Qualcomm so far. Every device featuring the Snapdragon 810 … more

Google To Launch Next Gen Android One On July 14

The first gen of Android One devices to be launched in India in September 2014 were … more

Desire 310 - how to unbrick?

16 posts
Thanks Meter: 1
 
By Reebee87, Junior Member on 1st June 2014, 04:12 PM
Post Reply Subscribe to Thread Email Thread
I bricked my Desire 310 when i tried to replace the stock recovery.

Rooted it successfully, read a lot of threads regarding MTK-based phones and thought i might be able to get more out of it, as i wasn't completely fine with 4.2.2 installed on a brand new phone.
However, i ended up with trying to install a custom recovery as described [here(would be a link if i were allowed to post them)]. The whole process gave no error, everything looked fine, ending with a "success!"-message, followed by a reboot, showing just the HTC splash... and a reboot... and a reboot... and.. well i guess you know what happened next.
Based on a whole lot of different threads, this might not be the end of my phone, as i can still see the [preloader(would be a picture if i were allowed to link it)] in my device manager, which basically means "hi, i'm not completely dead and you might find a way to recover me".
The question is: how?

I tried out SP Flash tool and MTK Flash tool so far. both programs find the phone when i get it ready to download my previously made backup (hey. i might not exactly know what i'm doing there, but at least i saved everything before i wrecked it! ).

The problem is: I just get an[error message(look above)] about some failed download to SRAM sorcery, which sounds cool and important but doesn't give me a clue about what i'm doing wrong or how to fix it. (cable ok tested 3 different cables, including the one the device was shipped with, also tested it on my PC running win 8.1 x64 and another one running win 7 x86)

Does anyone have an idea how i could get at least a working bootloader/recovery back to my device?

Tell me if you need any extra information

I also link an attachment including the log file created by SP Flash Tool.
Attachment 2772794
Well. That's it. Thanks in advance for anything that may be posted in here

Two Pictures related to this:

Attachment 2772803
Attachment 2772804
 
 
15th July 2014, 01:25 AM |#2  
Junior Member
Thanks Meter: 0
 
More
Exclamation Need your help
Quote:
Originally Posted by Reebee87

I bricked my Desire 310 when i tried to replace the stock recovery.

Rooted it successfully, read a lot of threads regarding MTK-based phones and thought i might be able to get more out of it, as i wasn't completely fine with 4.2.2 installed on a brand new phone.
However, i ended up with trying to install a custom recovery as described [here(would be a link if i were allowed to post them)]. The whole process gave no error, everything looked fine, ending with a "success!"-message, followed by a reboot, showing just the HTC splash... and a reboot... and a reboot... and.. well i guess you know what happened next.
Based on a whole lot of different threads, this might not be the end of my phone, as i can still see the [preloader(would be a picture if i were allowed to link it)] in my device manager, which basically means "hi, i'm not completely dead and you might find a way to recover me".
The question is: how?

I tried out SP Flash tool and MTK Flash tool so far. both programs find the phone when i get it ready to download my previously made backup (hey. i might not exactly know what i'm doing there, but at least i saved everything before i wrecked it! ).

The problem is: I just get an[error message(look above)] about some failed download to SRAM sorcery, which sounds cool and important but doesn't give me a clue about what i'm doing wrong or how to fix it. (cable ok tested 3 different cables, including the one the device was shipped with, also tested it on my PC running win 8.1 x64 and another one running win 7 x86)

Does anyone have an idea how i could get at least a working bootloader/recovery back to my device?

Tell me if you need any extra information

I also link an attachment including the log file created by SP Flash Tool.
Attachment 2772794
Well. That's it. Thanks in advance for anything that may be posted in here

Two Pictures related to this:

Attachment 2772803
Attachment 2772804


Hi ! saw your thread and required your help
1) can u proveide me information about how exactly did you root your device !!
And secondly if u remember your phone's build number can u plzz tel me because I also have aproblem with my desire 310 its single sim and 1gb ram version I eceived a software update and after the installation the phone keeps rebooting after every 2 mins if I use it or plug it in for charging and stays awake if I put it in ecovery or factory mode so I needed your roms backup so that I can fix my phone Unless if your phone was of the same specks as mine

I will be waiting for your soon response thanks
8th August 2014, 07:26 AM |#3  
Junior Member
Thanks Meter: 0
 
More
It happend the same for me! U can try recovery mode but it is not gonna work.
27th September 2014, 11:00 PM |#4  
blade_h's Avatar
Member
Thanks Meter: 5
 
More
I have the same problem (
29th September 2014, 11:20 AM |#5  
ssaeidd's Avatar
Junior Member
Flag shiraz
Thanks Meter: 1
 
More
i have this phone and after update that i have no problem with that. my phone is rooted by vroot app
14th January 2015, 12:16 PM |#6  
Member
Thanks Meter: 28
 
More
Thumbs up
Quote:
Originally Posted by Reebee87

I bricked my Desire 310 when i tried to replace the stock recovery.

Rooted it successfully, read a lot of threads regarding MTK-based phones and thought i might be able to get more out of it, as i wasn't completely fine with 4.2.2 installed on a brand new phone.
However, i ended up with trying to install a custom recovery as described [here(would be a link if i were allowed to post them)]. The whole process gave no error, everything looked fine, ending with a "success!"-message, followed by a reboot, showing just the HTC splash... and a reboot... and a reboot... and.. well i guess you know what happened next.
Based on a whole lot of different threads, this might not be the end of my phone, as i can still see the [preloader(would be a picture if i were allowed to link it)] in my device manager, which basically means "hi, i'm not completely dead and you might find a way to recover me".
The question is: how?

I tried out SP Flash tool and MTK Flash tool so far. both programs find the phone when i get it ready to download my previously made backup (hey. i might not exactly know what i'm doing there, but at least i saved everything before i wrecked it! ).

The problem is: I just get an[error message(look above)] about some failed download to SRAM sorcery, which sounds cool and important but doesn't give me a clue about what i'm doing wrong or how to fix it. (cable ok tested 3 different cables, including the one the device was shipped with, also tested it on my PC running win 8.1 x64 and another one running win 7 x86)

Does anyone have an idea how i could get at least a working bootloader/recovery back to my device?

Tell me if you need any extra information

I also link an attachment including the log file created by SP Flash Tool.
Attachment 2772794
Well. That's it. Thanks in advance for anything that may be posted in here

Two Pictures related to this:

Attachment 2772803
Attachment 2772804

Select DA_SWSEC.bin as Download-Agent...
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes