A Look at the Telegram+ Situation

more

Remove Unlocked Warning Message from Moto E 2015

more

Multi Boot: The Fall of Nandroid?

more

NVIDIA SHIELD: The Tegra X1 Powered Android TV Box

The post NVIDIA SHIELD: The Tegra X1 Powered Android TV Box appeared first on … more
Post Reply

LG G2 Problem after screen replace

OP benjamin94

28th March 2014, 01:48 PM   |  #1  
OP Member
Flag Rijssen
Thanks Meter: 15
 
44 posts
Join Date:Joined: Aug 2010
More
Hello Friends,

Ive got an quetion about my G2. My screen and LCD are broken. as you can see below.



As you can see both are broke. So i bought an brand new LG G2 Display unit (fully assembled.)

After the replacement my problem is still there? Can somebody of you tell me what's wrong?



Kind regards!
1st April 2014, 09:25 PM   |  #2  
OP Member
Flag Rijssen
Thanks Meter: 15
 
44 posts
Join Date:Joined: Aug 2010
More
Nobody?!?
1st April 2014, 10:14 PM   |  #3  
robogo1982's Avatar
Senior Member
Flag Osijek
Thanks Meter: 538
 
1,530 posts
Join Date:Joined: Apr 2011
More
Connector/PCB damage, maybe?
26th September 2014, 08:50 AM   |  #4  
Senior Member
Flag Abbotsford, BC
Thanks Meter: 19
 
260 posts
Join Date:Joined: Jan 2008
More
Quote:
Originally Posted by benjamin94

Hello Friends,

Ive got an quetion about my G2. My screen and LCD are broken. as you can see below.



As you can see both are broke. So i bought an brand new LG G2 Display unit (fully assembled.)

After the replacement my problem is still there? Can somebody of you tell me what's wrong?



Kind regards!

I just replaced mine and got the same results... before this the digitizer was broken but the display was still perfect. All ribbons seem to be connected properly, no visible damage...
26th September 2014, 10:09 AM   |  #5  
Junior Member
Thanks Meter: 0
 
10 posts
Join Date:Joined: Dec 2010
get a different lcd. Be very careful not to put any pressure on the screen when putting it together. I don't even tape mine in. I destroyed the lcd once with just light pressure putting the back of the phone on and the digitizer was still good. Luckily I had accidently ordered 2 screens so my second one I was more careful.
25th January 2015, 12:43 AM   |  #6  
urhaxable's Avatar
Senior Member
Thanks Meter: 23
 
127 posts
Join Date:Joined: Jun 2011
LG G2 broken after replacing screen
I just had the same problem, I don't think it's an issue with the screens, I think it's an issue with the video card or something.. I had bad digitizer, I first replaced just the digitizer as my LCD was fine, new digitizer had dead spot and I accidentally poked a hole in LCD. Had the black oooozz all over, but still worked and could see what you're doing, do I bought a assembled LCD, digitizer, and glass.. Replaced it and got a bunch of colored dots, put old screen back on, and it's now showing bunch of dots. I did notice I'm missing a pin on the phone's connector for LCD, not sure if it broke out when disconnecting old LCD or if it's supposed to be missing.

Did anyone get theirs fixed with me LCD or is the problem else where?

I noticed the internals were very similar to nexus 5, do they use same LCD or she connector, anything compatible there? I bent, wiggled, cracked old LCD and it still worked besides the black ooz, until I connected new assembly, so I'm thinking these LCD's are pretty durable and pressure on them didn't cause this issue.

Edit... Just looked up photo of connector, all pins are there.. Mine is missing 5th pin in from the right.. On bottom row..
should look like this

mine missing pin

Another edit...

I found the missing pin on my table, tiny thing, inserted it to connector, tossed a tad of silver solder on it,reconnected LCD ,works flawless!
Last edited by urhaxable; 25th January 2015 at 02:07 AM.
10th February 2015, 12:03 AM   |  #7  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Feb 2015
Phone Same issue
I have the same problem ( Color dots), so you solved by reconnecting all screen connectors? I really don't know what to do.

Quote:
Originally Posted by urhaxable

I just had the same problem, I don't think it's an issue with the screens, I think it's an issue with the video card or something.. I had bad digitizer, I first replaced just the digitizer as my LCD was fine, new digitizer had dead spot and I accidentally poked a hole in LCD. Had the black oooozz all over, but still worked and could see what you're doing, do I bought a assembled LCD, digitizer, and glass.. Replaced it and got a bunch of colored dots, put old screen back on, and it's now showing bunch of dots. I did notice I'm missing a pin on the phone's connector for LCD, not sure if it broke out when disconnecting old LCD or if it's supposed to be missing.

Did anyone get theirs fixed with me LCD or is the problem else where?

I noticed the internals were very similar to nexus 5, do they use same LCD or she connector, anything compatible there? I bent, wiggled, cracked old LCD and it still worked besides the black ooz, until I connected new assembly, so I'm thinking these LCD's are pretty durable and pressure on them didn't cause this issue.

Edit... Just looked up photo of connector, all pins are there.. Mine is missing 5th pin in from the right.. On bottom row..
should look like this

mine missing pin

Another edit...

I found the missing pin on my table, tiny thing, inserted it to connector, tossed a tad of silver solder on it,reconnected LCD ,works flawless!

11th February 2015, 03:19 AM   |  #8  
Junior Member
Flag São Paulo / SP
Thanks Meter: 2
 
15 posts
Join Date:Joined: Aug 2013
More
hi
you bought an original piece? purchased online or at any physical store? apparently your problem is in the connectors, however we can classify your new screen as a low quality product.

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes