Remove All Ads from XDA

[GUIDE] Step-wise Guide To UNBRICK Xolo Q1000 Opus

12 posts
Thanks Meter: 7
By sushant747, Junior Member on 20th May 2014, 05:11 PM
Post Reply Email Thread
Unbrick Xolo Q1000 Opus
Wipe Device and Flash Stock Rom

So finally here is the way to unbrick our Q1000 opus, and re-flash the stock rom. This will restore your phone to prestine condition ... just the way it was when you first got it in

Downlod the below mentioned files
1. DFU

this is a fairly simple process, i have put all the necessary stock image files into the zip, first we will flash the img files to our phone using DFU tools then we will use stock recovery to flash the containing Jellybean Stock Rom...Just follow the below steps

Step 1
extract the contents of DFU

Step 2
Open "DFU Tools" folder and run "install_drivers"

It will take a while to install , then you'll get the success message

Step 3
After Drivers are poperly installed, open dfu.exe
At first it will give you an error message shown below.. just click ok and proceed to next step

Step 4
Browse for the variant file contained in variant folder

Step 5
After loading variant you will see that the img files to be flashed are showing in the DFU tool window
Now go to the "DOWNLOAD" tab

Step 6
Below screen will show up ... when it does .. You need to connect Your phone to usb in power off state

Step 7
Phone will get detected and flashing will start ... after flashing is over phone will reboot, if it does not reboot then manually take out the battery and poweron the phone

Step 8
Now copy the "" file that you downloaded earlier to the root directory of your phone sd card then,
Go to Settings->About Phone -> Software Update
and select the update.

Thats it ... your phone will restart and flash the Stock JB rom and reboot once again ... and just like that Your XOLO Q1000 opus is Unbricked

The Following 6 Users Say Thank You to sushant747 For This Useful Post: [ View ] Gift sushant747 Ad-Free
17th June 2014, 02:55 PM |#2  
Senior Member
Thanks Meter: 78
dude it's getting stuck..

assert failed getprop( ro.product.device )

any help?
28th June 2014, 03:38 PM |#3  
OP Junior Member
Thanks Meter: 7
Originally Posted by cr723

dude it's getting stuck..

assert failed getprop( ro.product.device )

any help?

did u follow the step exactly .. and when are u gettign the error ?
6th July 2014, 04:31 PM |#4  
Maya2009's Avatar
Thanks Meter: 5
My friend have this Q1000 Opus and he updated to KitKat but he getting network problem so he wants it to downgrade to stock JB ROM so if i just download and put it on phone and try to update it through system update does it work or i have to follow from beginner steps ??
27th August 2014, 05:08 PM |#5  
manoj36's Avatar
Senior Member
Flag banglore
Thanks Meter: 52
Will flashing only in stock recovery will help??
12th February 2015, 07:20 PM |#6  
ggclanlord's Avatar
Senior Member
Thanks Meter: 201
Before last step itself the phone boots, which firmware is it at that time, before flashing ""?

---------- Post added at 12:50 AM ---------- Previous post was at 12:09 AM ----------

DFU Tools not working in Windows 64bit :/
The Following User Says Thank You to ggclanlord For This Useful Post: [ View ] Gift ggclanlord Ad-Free
Post Reply Subscribe to Thread

downgrade, opus, stock rom, unbrick, xolo
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes