Can you get a logcat of the issue by any chance? It might be the boot animation again.
[ROM][OFFICIAL][5.0.2] AICP for OtterX [NIGHTLIES]
- Thread starter Hashbang173
- Start date
Can you get a logcat of the issue by any chance? It might be the boot animation again.
Instructions on how to get logcat please..
EDIT: Never mind seems easy adb logcat > filename.txt
Last edited:
Attached locat, it's actual still running
Not sure if it will stop doing a logcat in adb
EDIT.. I ended adb looked like it was just constanting running logcat without ending anyway debug.txt is the one I ended.
this was with clean install of aicp_otterx_lp-8.0-NIGHTLY-20150215.zip NO gapps
Not sure if it will stop doing a logcat in adb
EDIT.. I ended adb looked like it was just constanting running logcat without ending anyway debug.txt is the one I ended.
this was with clean install of aicp_otterx_lp-8.0-NIGHTLY-20150215.zip NO gapps
Last edited:
Try removing the bootanimation.zip from system/media from TWRP.
UPDATE: It works must have been a issue on my side.
Just tried it with clean install, looks to be stuck at boot animation.
Will not boot to OS, I guess wait for others if they have same problem.
I also tried removing bootanimation.zip made no difference.
Last edited:
Flashed the 2-18 nightly, deleted bootanimation.zip (don't know if it was required) and it booted up and now I'm using it! Nice work, best LP ROM so far with lots of features.
Can someone upload the aicp_otterx_lp-8.0-RELEASE-20150209 and/or the latest nightly to a cloud service if they have already downloaded them? The download says it is going to take 37 days, and that is crazy, as I do not have that much time to wait on this.
Because I like to help people and the difficulty of your request was minimal, I proudly present to you the URL of the desired file
https://www.dropbox.com/s/ibztf43riyz7tft/aicp_otterx_lp-8.0-RELEASE-20150209.zip?dl=0
Enjoy
Sent from my Amazon OtterX using XDA Free mobile app
Because I like to help people and the difficulty of your request was minimal, I proudly present to you the URL of the desired file
https://www.dropbox.com/s/ibztf43riyz7tft/aicp_otterx_lp-8.0-RELEASE-20150209.zip?dl=0
Enjoy
Sent from my Amazon OtterX using XDA Free mobile app
You sir are a saint.
Is there some special trick to getting aicp_otterx_lp-8.0-RELEASE-20150209 to boot?
Wiped, wiped and re-wiped everything to ensure I'm not flashing dirty.
Have let it sit at boot for 10 -15 minutes and nothing. Not sure I can go back to the previous version...will have to find it on my pc since I 'cleaned' all the old roms off (like an id10t) before getting this one to load.
Wiped, wiped and re-wiped everything to ensure I'm not flashing dirty.
Have let it sit at boot for 10 -15 minutes and nothing. Not sure I can go back to the previous version...will have to find it on my pc since I 'cleaned' all the old roms off (like an id10t) before getting this one to load.
I didn't have any real noticable issues with the ROM
Sent from my Amazon OtterX using XDA Free mobile app
Sent from my Amazon OtterX using XDA Free mobile app
FWIW, I could not get it to boot, either. I am running the CM12.1 that joshuabg so kindly compiled.
Sent from my Amazon OtterX using XDA Free mobile app
Sent from my Amazon OtterX using XDA Free mobile app
Last edited:
I could get the latest nightly to boot with no problem and I'm also trying the CM12.1 and so far so good
Sent from my Amazon OtterX using XDA Free mobile app
Here's a build of 9.0. The source is from around 2015.06.15 (the build info in settings will say otherwise). I think it's decent. There's not enough free RAM, but it seems to run okay.
Things I changed:
* The minimum brightness is now 1 instead of the default 10.
* I wrote a Volume quick settings tile. It defaults to the music stream. I hope that's okay with everyone. Lollipop has switched to vector graphics for the icons in settings. I didn't feel like creating one, so I borrowed the wifi file. I chose the one with the not (!) on it so you know it's not wifi.
Other than that, it's stock AICP.
https://drive.google.com/file/d/0B7BjC3Ky49TVbGtVblJqUjVIYUE/view?usp=sharing
Things I changed:
* The minimum brightness is now 1 instead of the default 10.
* I wrote a Volume quick settings tile. It defaults to the music stream. I hope that's okay with everyone. Lollipop has switched to vector graphics for the icons in settings. I didn't feel like creating one, so I borrowed the wifi file. I chose the one with the not (!) on it so you know it's not wifi.
Other than that, it's stock AICP.
https://drive.google.com/file/d/0B7BjC3Ky49TVbGtVblJqUjVIYUE/view?usp=sharing
I'm using this latest build to post this message. I did not install Gapps and I slimmed down the total memory usage of the system apps considerably. It seems to average about 50-60 MB of free RAM. I do like the imp!ementation of the easy volume control tile
After those measures, the performance is pretty good, snappy almost. I'm going to try to tweak it some more if possible.
Thanks for your hard work, it's always exciting to see new ROM releases for this device
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
16.
.
.
.
AICPAndroid Ice Cold Project
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
.
.
.
.
.
In the beginning we would like to thank:
- CM team
- maxwen
- Thoemy
- SlimBean rom team
- CarbonRom team
- LiquidSmooth rom team
- Omni rom team
- DU team
- teemodk
- audahadi
- Community
- @LorD ClockaN
- @zipsnet
- @n3ocort3x
- @semdoc
- @eyosen
- @alienmind
- @Chezbel
- @Drgravy
- @eboye
.
.
.
We are now paying for servers that build nightlies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 8
Download link: http://dwnld.aicp-rom.com/?device=otterx
Recommended Gapps of otterx (Use Universal DPI)
Full Changelog link: goo.gl/mIgmYG
- You tell...
ROMS should contain everything you need to enjoy Lollipop. You are not required to install any Add Ons, simply download the latest ROM, gapps, flash it, and go!
You are STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup - these can cause stability issues that are very hard to debug. If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience strange behavior.
How to flash:
- Don't do it if you don't know it
- ROM has gapps persistance in between dirty flashes
KERNEL:
Kernel in this rom follows CM source with custom additions.
PREREQUISITE FOR OTA:
To be able to flash over OTA app, TWRP recovery is needed.
Zips gets saved under AICP_ota folder on your internal SDcard.
If you want to contribute to the AICP or wanna see what is being worked on/merge feel free to visit our gerrit, link is at the bottom!!!
IceColdJelly AICP G+ community
kernel github
rom gerrit
You want to see a normal night at the DEV office, click here!!
KitKat OP
XDA:DevDB Information
AICP for OtterX, ROM for the Amazon Kindle Fire
Contributors
joshuabg
Source Code: https://github.com/AICP/platform_manifest
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Must be on OtterX bootloader, recovery, and partitions
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2014-07-18
Last Updated 2015-03-2011Alright. It's here. OtterX KitKat with long battery life.
The details: After much effort trying to fix the KK kernel, on a whim I thought I'd see if the LP kernel would work. It does. I used the kernel/amazon/otter-common/sound/soc/omap source folder from the KK kernel. That made sound work. So, in the end, it was a rather simple solution.
Here's the kernel source archive and the compiled AICP 7.0. The ROM is compiled with Sabermod. ART works (the included Launcher3 doesn't work with ART, so install a different launcher before switching).
kernel source: https://drive.google.com/file/d/0B7BjC3Ky49TVd19MNFQ3TWg5aHM/view?usp=sharing
ROM: https://drive.google.com/file/d/0B7BjC3Ky49TVeDVxUTAwU0NldnM/view?usp=sharing
Let me know what you think. Cheers.98Thanx Guys... It's official from now on
And @zipsnet and @LorD ClockaN ... Sorry guys for missunderstanding...
But AICp is lost without you :good::good::good:
Say hello to AICP for otterx and Enjoy !!!7I'm using this latest build to post this message. I did not install Gapps and I slimmed down the total memory usage of the system apps considerably. It seems to average about 50-60 MB of free RAM. I do like the imp!ementation of the easy volume control tile
After those measures, the performance is pretty good, snappy almost. I'm going to try to tweak it some more if possible.
Thanks for your hard work, it's always exciting to see new ROM releases for this device
If people would be interested, I can add otterx back to the official nightlies for android 5.1.x
