Post Reply Subscribe to Thread Email Thread

i605 verizone galaxy note 2 unbricker

9th August 2014, 06:05 PM |#81  
OP Member
Thanks Meter: 25
 
58 posts
Join Date:Joined: Dec 2006
Quote:
Originally Posted by Ahh-sh!t

So, this is my first time posting hopefully I'm doing this right lol

ok, so I have this i605 note 2 that had VRALJB I believe, this phone was soft bricked by a customer not me. but i managed to get it up and

running using root66_VZW_stock_system.tar but later soft bricked again. Ive tried ODIN using boot-stock-aljb-SCHI605 which it took but would

always get stuck at the Samsung logo and cant enter "recovery" but will enter 'download mode'. So I ended up here, I did the resistor jump with

my own twist using an IPAD home button. when I use the VRALJB unbricker nothing just a blank screen. So I tried MJ9 unbricker which gave

the "SDCARD MODE" I press volume down and "APMB: INVALID APMB DATA". Is the VRALJB unbricker corrupted ? can some one upload a

new or can some one show me how to make my own boot.img. Any help would be awesome been at this for 2 weeks now and im at a loss.

I have images if you need them wont let me post outside links since im a "noob"


if your phone boot on samsung logo then boitloader is fine, somthing other is corupted. this unbrickers tested by me
9th August 2014, 11:55 PM |#82  
Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: Aug 2014
Cant load VRALJB Sd-UnBrick .img
Device no longer boots it is hard bricked now, I have tried VRALJB unbricker (old bootloader) i605 unbrick sdcard.rar. Image does not load just a blank screen. Using i605 MJ9 unbricker.rar yields this error "APMB: INVALID APMB DATA". So were to now? Am I out of options here since there are only two files and one of them "no boot" and the other has an "ERROR". Thanks
10th August 2014, 04:48 AM |#83  
Senior Member
Flag Kalamazoo
Thanks Meter: 42
 
125 posts
Join Date:Joined: Jul 2010
More
Quote:
Originally Posted by Ahh-sh!t

Device no longer boots it is hard bricked now, I have tried VRALJB unbricker (old bootloader) i605 unbrick sdcard.rar. Image does not load just a blank screen. Using i605 MJ9 unbricker.rar yields this error "APMB: INVALID APMB DATA". So were to now? Am I out of options here since there are only two files and one of them "no boot" and the other has an "ERROR". Thanks

check out the alternative method in my signature
10th August 2014, 08:01 AM |#84  
OP Member
Thanks Meter: 25
 
58 posts
Join Date:Joined: Dec 2006
Quote:
Originally Posted by Ahh-sh!t

Device no longer boots it is hard bricked now, I have tried VRALJB unbricker (old bootloader) i605 unbrick sdcard.rar. Image does not load just a blank screen. Using i605 MJ9 unbricker.rar yields this error "APMB: INVALID APMB DATA". So were to now? Am I out of options here since there are only two files and one of them "no boot" and the other has an "ERROR". Thanks


check resistor, i think u doo somthing wrong. i have test this unbricker and it's work fine
13th August 2014, 12:29 AM |#85  
Junior Member
Thanks Meter: 0
 
3 posts
Join Date:Joined: Aug 2014
Cant load VRALJB Sd-UnBrick .img
I soldered this using a microscope and verified my connection and they work with MJ9 unbricker.rar. Unsuccessful booting up VRALJB unbricker, just a blank screen. I am very well rehearsed in surface mount soldering and board level type repairs.
21st February 2015, 01:22 AM |#86  
Junior Member
Thanks Meter: 0
 
4 posts
Join Date:Joined: Feb 2015
More
note2 unbrick
Quote:
Originally Posted by KOBOL

after 7 days of working i develop unbricker for this phone !!!

this unbricker can repair bricked i605 phone only!




i repair my i605 phone wrongly flashed whit n7100 firmware.

i hope this info help meny people whit bricked phone and wrongly flashed too like me

instruction:
1. disassemble phone
2. find resistor located on picture
3. better make switch i use iphone home button
4. prepare sdcard (i use 2 gb sdcard and write with any know img writer. i use winhex to write img)
5. insert sdcard to phone and conect lcd
6. conect POWERED OFF phone to power supply
7. Short resistore (as i say before i use iphone home button)
8. Turn on the phone, and REMOVE THE SHORT between 3 to 6 seconds
9. After 5 seconds, you can see message on the LCD boot recovery was succeeded
10. assemble phone
11. u can full flash your phone

VRALJB unbricker (old bootloader)
i605 unbrick sdcard.rar



MJ9 unbricker
i605 mj9.rar

i605 efs file.

EFS i605.zip


XDA:DevDB Information
Unbricker, Tool/Utility for the Verizon Samsung Galaxy Note II

Contributors
KOBOL

Version Information
Status: Testing

Created 2014-01-18
Last Updated 2014-06-07

Do we need all these files on sd card or just one of them? Can we just copy them to sd card or do we write them all as imiga file one by one or all at once? I am having trouble fixing my Note 2 verizon version please help me guys the more details better for me thanks i am not expert , btw i did similar thing with my google box i just copied files to sd card and it worked there is reset botton on google box but its different with phones thanks i hope i get some replies.
21st February 2015, 04:46 AM |#87  
OP Member
Thanks Meter: 25
 
58 posts
Join Date:Joined: Dec 2006
I write full detail how to fix phone. It's little hard to doo. Ther u see put files on sdcard? I say u need write this image. About home button i say i solder it on resitot if u dont want solder then short it whit twizers.


Sent from my iPhone using Tapatalk
28th February 2015, 12:24 AM |#88  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Feb 2015
I can't see the pictures. Can you repost them?
Quote:
Originally Posted by KOBOL

after 7 days of working i develop unbricker for this phone !!!

this unbricker can repair bricked i605 phone only!




i repair my i605 phone wrongly flashed whit n7100 firmware.

i hope this info help meny people whit bricked phone and wrongly flashed too like me

instruction:
1. disassemble phone
2. find resistor located on picture
3. better make switch i use iphone home button
4. prepare sdcard (i use 2 gb sdcard and write with any know img writer. i use winhex to write img)
5. insert sdcard to phone and conect lcd
6. conect POWERED OFF phone to power supply
7. Short resistore (as i say before i use iphone home button)
8. Turn on the phone, and REMOVE THE SHORT between 3 to 6 seconds
9. After 5 seconds, you can see message on the LCD boot recovery was succeeded
10. assemble phone
11. u can full flash your phone

VRALJB unbricker (old bootloader)
i605 unbrick sdcard.rar



MJ9 unbricker
i605 mj9.rar

i605 efs file.

EFS i605.zip


XDA:DevDB Information
Unbricker, Tool/Utility for the Verizon Samsung Galaxy Note II

Contributors
KOBOL

Version Information
Status: Testing

Created 2014-01-18
Last Updated 2014-06-07

28th February 2015, 02:51 AM |#89  
OP Member
Thanks Meter: 25
 
58 posts
Join Date:Joined: Dec 2006
Picture inside unbricker sdcard.rar


Sent from my iPhone using Tapatalk

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes