Sony Xperia Z3 Lollipop Framework Ported to CM12

Android 5.0 for Xperia has a unique look and feel. You don’t have to get a Sony … more

Do You Use Recents as a Task Switcher?

Google introduced a revamped Recents interface with Lollipop in the hopes of making it easier for … more

YU Yureka All-in-One ToolBox (CM12S Only)

This packed toolbox by XDA Senior Member gohel.vishal makes many useful tweaks … more

Sony Xperia Z4 Forum Now Available

Sony’s Xperia line has seen plenty of development on XDA, and now that the Xperia Z4 has been … more
Post Reply Subscribe to Thread Email Thread

[RECOVERY LOCKED/NCG] Safestrap Recovery v3.75 [2014-06-26 B03]

Announcement from Hashcode: Safestrap: Custom Recovery for Locked Devices!
1st April 2015, 04:57 PM |#541  
phillipmckinnish's Avatar
Senior Member
Flag Chattanooga
Thanks Meter: 31
 
174 posts
Join Date:Joined: Nov 2013
More
recovery
i used SS to flash alliance rom and now when I reboot It does not show the SS screen nor can I boot to recovery from SS...It says its installed..Little help please
 
 
1st April 2015, 05:14 PM |#542  
Senior Member
Thanks Meter: 47
 
204 posts
Join Date:Joined: Mar 2009
Donate to Me
Quote:
Originally Posted by phillipmckinnish

i used SS to flash alliance rom and now when I reboot It does not show the SS screen nor can I boot to recovery from SS...It says its installed..Little help please

SS doesn't work in Lollipop, so it won't show until you flash an NK2 kernel, do what you need to do, then flash OA8 or OC4 kernel to get back into Lollipop.
1st April 2015, 05:20 PM |#543  
phillipmckinnish's Avatar
Senior Member
Flag Chattanooga
Thanks Meter: 31
 
174 posts
Join Date:Joined: Nov 2013
More
Quote:
Originally Posted by Rapunzl

SS doesn't work in Lollipop, so it won't show until you flash an NK2 kernel, do what you need to do, then flash OA8 or OC4 kernel to get back into Lollipop.

so when I flash the Nk2 kernel and it reboots the SS sceen will come back?I just got the s5 yesterday...this safestrap stuff is all new,I already miss twrp.lol
1st April 2015, 05:58 PM |#544  
Senior Member
Thanks Meter: 47
 
204 posts
Join Date:Joined: Mar 2009
Donate to Me
Quote:
Originally Posted by phillipmckinnish

so when I flash the Nk2 kernel and it reboots the SS sceen will come back?I just got the s5 yesterday...this safestrap stuff is all new,I already miss twrp.lol

Yes, so watch for the SS screen right after the S5 splash screen, or it will take a while and go back to stock recovery, where you'll have to reboot again to get to SS. Make sure you do an advanced wipe and wipe all but SD card, and after it's installed, do a factory reset. Do the setup before downgrading the kernel to flash anything else.

When you're done in SS, just flash the OA8 kernel.
The Following User Says Thank You to Rapunzl For This Useful Post: [ View ]
1st April 2015, 06:33 PM |#545  
Senior Member
Thanks Meter: 137
 
565 posts
Join Date:Joined: Jun 2010
Quote:
Originally Posted by muniz_ri

Are you guys restoring both system and data at the same time? Try restoring system only to test.

Yes, I was restoring both system/data same time. I didn't try just restoring system only.
4th April 2015, 01:19 AM |#546  
żGotJazz?'s Avatar
Senior Member
Thanks Meter: 52
 
376 posts
Join Date:Joined: Oct 2006
More
I have a friend with a VZW S5 that took the latest stock Lollipop update a few days ago (VRU1BOC4). He started experiencing problems with his fonts getting corrupted.

I want to get him started on the wonderful world of custom ROMs and away from the Samsung hell. Will he be able to install Safestrap v3.75 and run other 5.x ROMs on his phone, since he is unrooted with the VRU1BOC4 build?
4th April 2015, 03:58 PM |#547  
Member
Flag Istanbul
Thanks Meter: 15
 
36 posts
Join Date:Joined: Mar 2015
More
Quote:
Originally Posted by hashcode

attention: I will be stopping official safestrap support on 9/1/2014. For more information please see:
https://plus.google.com/111109372727...ts/atoj3xlj35b

*** disclaimer ***
i work on projects that may brick your device. Don't sue me, hate me or try and kill my dog if that happens. I will feel bad the community will feel bad and hopefully we'll find a way to get you going again. But, the very nature of my projects involves a certain amount of risk taken by you. And by using the projects that i work on, you've accepted that fact.

there is an unknown issue where if you have encryption enabled and install ss it bootloops. If you fit this description please stay away from safestrap for now.

verizon samsung galaxy s5 safestrap
(dont use this is you're an att s5 -- partitions are different -- bad results)


safestrap installation video by @tomsgt:
https://www.youtube.com/watch?v=5d-c...ature=youtu.be


current project status:
beta v3.75 (ncg)

read known issues in post #2
make sure you check requirements below before installing

what is safestrap?

safestrap is a bootstrap / recovery for locked bootloader phones. The goal is to avoid touching your primary system (i'll call this "stock" system) and only flash or make large changes to another place on your phone that safestrap treats as a "2nd system" (in this case, it's a series of virtual rom slots located on the internal emmc area: "/sdcard"). Once installed, you will see a "splashscreen" giving you the option to hit "menu" to enter recovery. The recovery portion of safestrap is now based on twrp 2.7.1.x (a touch based recovery) and you can perform .zip installs, backups and restores here. The additional features i've added to twrp are mostly located under the "boot options" menu:

  1. here you can create virtual rom-slots (probably only 1 on the s5 due to partition size and internal space) for flashing roms. These rom-slots allow for different sizes of /system, /data and /cache partitions. The defaults *should* be good enough for flashing the stock-based roms.

    Note: The bigger you make these partition the less room you will have to make other rom-slots.
  2. you can activate a new rom-slot by choosing the slot you wish to make active and then selecting the "activate" button. Once active, you will see the "rom-slot#" up in the top of the screen shown in green. If you make the "stock" rom active, then you can see it in the top shown in red.
  3. once a rom-slot is active, all actions you would normally perform using twrp are directed to that rom-slot. For example, "install" to flash a .zip, backup and restore.
  4. for more information you can read up here:
    http://blog.hash-of-codes.com/how-to-safestrap/

how do i install safestrap?
  1. requirement: Root
  2. requirement: Busybox. If your stock rom doesn't have it built-in you need to grab "busybox" from the play store and run the installer.
  3. requirement: External sd card
  4. requirement: Remove (temporarily) xposed framework while installing safestrap
  5. requirement: Allow apk install from unknown sources
  6. download the safestrap apk
  7. find the apk using a filemanager tool and open it on your device, then click "install".
  8. (if updating from an existing safestrap you might be warned that this will over-write the existing installation. Click the "yes" equivalent to this message.)
  9. once installed, open up the safestrap application as you would any other app.
  10. agree to the disclaimer that you won't try to sue me and hunt me down with a rifle if you manage to break your phone..
  11. then use the "install recovery" button. You should see the current version down in the lower left corner of the window. And the "status:" should say "installed" when you're done.
  12. from there you can reboot and you *should* see a new splash screen during the boot up. While this is showing you can enter safestrap recovery using the [ menu ] button.
  13. that's it for the installation! Read below for a brief overview of safestrap recovery v3.x

how do i enter recovery?

during each reboot a splashscreen will be displayed showing whether the device is running a rom-slot or on the "stock rom".
Press the button shown on the screen to either enter "recovery" or "continue" booting (or the hard button underneath each option).

how do i upgrade safestrap?
  • push the apk up to your sdcard.
  • boot back into the "stock" rom-slot.
  • go into your old safestrap app and use the "uninstall recovery" button
  • then, open a "file explorer" of some sort (even tw "my files" will work)
  • browse to where you pushed the apk
  • click on it and install like normal
  • once installed, open the apk
  • grant su access
  • use the "install recovery" button
  • all set, now you can reboot and re-activate whatever rom-slot you were using


downloads:
confirm that you are using an verizon wireless samsung galaxy s5

find your stock operating system version below and use that filename:

[kitkat:ncg]
latest beta file: safestrap-kltevzw-ncg-3.75-b03.apk
xda downloads
mirror 1 (crackflasher)


as of version 3.75, safestrap recovery is now based on twrp 2.7.1.x. For more on twrp you can visit their website: http://www.teamw.in/

warning: Safestrap is heavily modified to be "safe" for your device. Do not download twrp from their website and expect it to work the same way. Also twrp does not support safestrap, tho some issues that may come up will be twrp dependant, please try and contact myself or look on the forums for your device for answers before hunting down twrp people. They won't be able to help w/ safestrap specific questions.

for the purposes of direct user testing i've established a channel on freenode.net irc: #safestrap
i'm in the channel mostly all the time, but may not be active for discussion.

special thanks to
deestroy & teamwin for all their hard work making twrp such a fantastic recovery. If you are considering a donation, then please have a look at the team win website: http://teamw.in/project/twrp2

xda:devdb information
safestrap recovery v3.75, tool/utility for the verizon samsung galaxy s 5

contributors
hashcode, deestroy & teamwin

version information
status: testing
current beta version: 3.75 b03
beta release date: 2014-06-26

created 2014-06-25
last updated 2014-08-12

plz update i need aroma installer !!
4th April 2015, 10:43 PM |#548  
Senior Member
Thanks Meter: 129
 
325 posts
Join Date:Joined: Nov 2008
Quote:
Originally Posted by Y4HY4

plz update i need aroma installer !!

No, he's stopped development, just like he said. You want aroma, you build safestrap to utilize it. Stop demanding things
The Following 3 Users Say Thank You to ldeveraux For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes