Analysis & Opinion

Top Forum Discussions

Flashing KITKAT 4.4.2 with everything working perfectly.. Stock Samsung Frameware .

2,098 posts
Thanks Meter: 11,177
By firasusman, Senior Member on 17th January 2014, 07:21 PM
Post Reply Subscribe to Thread Email Thread
8th March 2014, 10:31 AM |#151  
ValenteL's Avatar
Senior Member
Flag Espinho
Thanks Meter: 881
Firmware on titre.
8th March 2014, 11:23 AM |#152  
lrcquest's Avatar
Senior Member
Flag Gods Own Country!!
Thanks Meter: 263
Have you able to do the call recording properly on kitkat? any solutions?
8th March 2014, 03:04 PM |#153  
ThePanama's Avatar
Senior Member
Thanks Meter: 56

You Sir are a God!

Followed your steps exactly in post 2 (more than happy to do this step by step as shown) and it all worked exactly as you described without errors or false boots/looping etc.

Many thanks for taking the time to lay this out in an easy to follow step by step procedure

Very much appreciated
The Following User Says Thank You to ThePanama For This Useful Post: [ View ]
11th April 2014, 07:43 PM |#154  
Junior Member
Thanks Meter: 2
I did the instructions in OP .
100% perfect

Sent from my SM-N9005 using Tapatalk
The Following 2 Users Say Thank You to Eman_Xda For This Useful Post: [ View ]
19th April 2014, 04:49 PM |#155  
Junior Member
Thanks Meter: 0
Me too so happy.
Exactly perfect.
As you said.
You are amazing.

Sent from my SM-N9005 using Tapatalk
4th June 2014, 06:05 AM |#156  
Junior Member
Thanks Meter: 0
Please help me ...
Please share with me this files (bootloader, pda, phone, csc) for ODIN:

AP_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5
BL_N9005XXUENA6_340325_REV03_user_low_ship_MULTI_C ERT.tar.md5
CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MU LTI_CERT.tar.md5

Please! Add link to this forum or send me email to .... I need repair my Note3. THANK YOU!
4th June 2014, 07:41 AM |#157  
Junior Member
Thanks Meter: 0
Hello all, ive been searching everywhere for this thread, but nothing came across.

i have SM-N900 Exynos with Baseband NC1 and Build Number ND1.

i've tried to install CWM via Odin and no luck. Also i've tried Kingo Root Method with no luck either.

Any suggestion? i want to ROOT my phone so bad

My Knox Warranty has tripped 0x1 but no ROOT and no custom recovery installed. what a waste.

sorry for my bad english
19th August 2014, 09:49 AM |#158  
Flag Kochi
Thanks Meter: 20
Exclamation Unknown baseband
Followed the steps on a N9005 and now am stuck with Unknown baseband after booting. Camera is also not working. Wifi is OK. Any help?
Tried lot of solutions from xda without any help.
20th August 2014, 01:49 AM |#159  
Senior Member
Thanks Meter: 44
Hi is this method Knox safe 0x0 ?
17th April 2015, 11:08 PM |#160  
Thanks Meter: 6
Fixing IMEI Unknown / loss of Mobile Network and sound issues
Originally Posted by wittaya73

Hi "firasusman"

I have some question for you after your thread helped my phone wake up.

1. My IMEI is gone. Perhaps it was gone before your "Flashing KITKAT 4.4.2 with everything working perfectly.. Stock Samsung Frameware ."
I've tried to use your "Brick_Loop_FIX_afterRestoringBackup", but not work for me. Someone told me to flash TWRP via odin and try again with your "Brick_Loop_FIX_afterRestoringBackup".

Can you tell me how to flash TWRP over CMW Recovery?? Because after I tried to flash TWRP over CMW, I cannot go into recovery mode by pressing Vol up + Home + Power.

2. Other told me to try to flash with Stock ROM 4.4.2 via odin to get IMEI back.
Is it OK to flash official KK ROM from Poland??

Please help..
Thank you
My Note 3 (SM-N9005 SFR)

I had the same problem and this fixed my issue
Credit to _alexndr
Actually I upgraded to Lollipop and then when I ported Kitkat Rom in order to downgrade to 4.4.2, I got "baseband unknown" and everything gone ( IMEI, Mobile Network, Camera, Sound and ...).

What I did ( note my phone has been updated to Lollipop baseband and bootloader, and my below instruction might give you some hint if you are on some other Roms or bootloaders).

1- reboot to download mode (holding power,volume down and home buttons)
2- Applying these three files vie Mobile odin 3.09 PC.
>> BL_N9005XXUGBOB6.tar.md5 <<
>>AP_PERSIST_LP_N9005,tar.md5<< ( you need to unzip the file ) / P_PERSIST_LP_N9005,tar.md5 is not necessary and you can leave it blank.
>> CP_N9005XXUGBOA1.tar.md5 <<
3- hit the start button on Mobile odin PC. and sit back to finish its job.
Click image for larger version

Name:	attachment.php.jpg
Views:	148
Size:	146.2 KB
ID:	3268017
4- Go to mobile recovery mode in order to wipe/factory reset data ( holding power, volume UP and home buttons at the same time).
5- Reset the phone. It will take time to boot up and then good to go .
BTW my knox still is 0x0.
Last edited by RedApple; 17th April 2015 at 11:12 PM.
The Following User Says Thank You to RedApple For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools
Display Modes