FORUMS

XPrivacy for Android Lollipop – XDA Xposed Tuesday

Have you ever been on the Google Play Store and saw an app that you wanted to … more

How a HTC Droid Eris Changed a Members Life

Rarely can a member say that Android development or XDA had a profound effect on … more

XDA Office Space: Frankenstein’s Perfect IM Client?

The portal’s decentralized XDA office lies in a Hangouts chatroom, where … more

Which IM Client on Android is best?

With so many different messengers to choose from, it can be tough to find the best one for you and … more
Post Reply Subscribe to Thread Email Thread

[GUIDE] Restore Bootloader Bricked S3 to Stock Firmware AFTER 4.3 update. No Jtag

27th November 2014, 04:47 AM |#51  
Junior Member
Thanks Meter: 0
 
More
well i finally got cm11 on the phone....

how i got the phone into a state without using the debrick SD image. is downloaded the. T999UVUENC2_T999TMBENC2_TMB.zip root 66 by DocHoliday77. installed via ODIN. phone then would boot up no issue. tried the cm one click install, but that didn't work still, was still stock rom but had the CWM recovery on there. so put on DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.0 (1) factory reset wip3, wipe cache, and devick. then from CWM put on CM11. and superSU. Gapps. all good to go. not sure if the regular CM11 file would of worked. as i used my modified file

i followed, http://forum.xda-developers.com/show....php?t=2713885 and just removed the lines from the \META-INF\com\google\android\updater-script file. others added in their version of bootloaders. others commented out....


assert(getprop("ro.bootloader") == "T999UVUENC2" ||
getprop("ro.bootloader") == "T999UVDLJA" ||
getprop("ro.bootloader") == "T999UVDLJC" ||
getprop("ro.bootloader") == "T999UVDMD5" ||
getprop("ro.bootloader") == "T999UVUEMJC" ||
getprop("ro.bootloader") == "T999VVLDLL1" ||
getprop("ro.bootloader") == "T999LUVAMB7" ||
getprop("ro.bootloader") == "T999VVLDMF2" ||
getprop("ro.bootloader") == "T999VVLUEMK5");

i hate knox. good 8h+ spent trying to get cm11 on the phone, but sure is a nice rom.
 
 
2nd December 2014, 09:24 PM |#52  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by Zaphodspeaks

Well you can not downgrade your bootloader, that will be there until if another upgrade ever comes..
if you try to Downgrade, it will permanently brick your phone, and make it an expensive paper weight..

OK, guess the warrenty bit 1 would stay there, and I can't upgrade from the official release now.
Thanks for the info
5th December 2014, 08:41 AM |#53  
Zaphodspeaks's Avatar
Senior Member
Thanks Meter: 107
 
More
Quote:
Originally Posted by Jack Test

OK, guess the warrenty bit 1 would stay there, and I can't upgrade from the official release now.
Thanks for the info

If your interested in Resetting your Flash Counter, you can download "Triangle Away" resets your flash counter to Zero
13th December 2014, 11:16 PM |#54  
Junior Member
Thanks Meter: 0
 
More
I have an At&t s3 with 4.3. I flashed it with the wrong bootloader (i747M). Now, the debrick file does not work anymore.
What should I do?
Is there a fix for this?
Or is my phone truly dead now?
14th December 2014, 04:33 PM |#55  
Junior Member
Thanks Meter: 0
 
More
Unhappy galaxy s3 sgh-T999 bricked
I could flash galaxy s3 sgh-T999 bricked with odin and before I remove sd 32gb start after flashing back to stay again bricked?
if you insert the sd 32gb screen goes black but if you insert the sd 32gb if you turn good
7th May 2015, 05:44 PM |#56  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by twolves14

This is the error I'm getting:

Code:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> 
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any advice? Further information here: http://forum.xda-developers.com/show...&postcount=506

i m facing exactly same prob with this t999 16gb edition.
i d posted a similar pic of boot screen that i get upon inserting debrick sd card + power on.
Any remedy you were able to find.
br

http://forum.xda-developers.com/show...&postcount=647
10th May 2015, 06:18 PM |#57  
twolves14's Avatar
Senior Member
Thanks Meter: 21
 
More
Quote:
Originally Posted by i_seeque

i m facing exactly same prob with this t999 16gb edition.
i d posted a similar pic of boot screen that i get upon inserting debrick sd card + power on.
Any remedy you were able to find.
br
http://forum.xda-developers.com/show...&postcount=647

Sorry man, no fix was found. I still have my dead t999 in my closet somewhere. I think JTAG repair is only option.
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes