FORUMS

A MT6577 smartwatch from 'iradish' brand

90 posts
Thanks Meter: 34
 
By acb123, Member on 9th June 2014, 03:16 PM
Post Reply Subscribe to Thread Email Thread
Just saw this smartwatch listed in Pandawill. Everything is the same as the ZGPAX S5.



> Pandawill I6 Watch Phone 1.54 Inch MTK6577 Black

It's being sold for $129.99. If it could be detachable like the Neptune Pine then I would get one instantly.
Last edited by acb123; 9th June 2014 at 03:22 PM.
 
 
9th June 2014, 04:11 PM |#2  
simple1i's Avatar
Senior Member
Flag london
Thanks Meter: 64
 
More
Quote:
Originally Posted by acb123

Just saw this smartwatch listed in Pandawill. Everything is the same as the ZGPAX S5.

...

> Pandawill I6 Watch Phone 1.54 Inch MTK6577 Black

It's being sold for $129.99. If it could be detachable like the Neptune Pine then I would get one instantly.

Its 15.7mm thick, slightly chunky, but wearable.

Good 500Mah battery
Play Store
FM Radio
Selfie front facing 2 MP cam
MTK6577 ARM Cortex A9 dual core, 1.0GHz
10th May 2015, 03:41 AM |#3  
Junior Member
Thanks Meter: 0
 
More
Unhappy Soft Bricked Iradish I6 and what I have done.. More to come
Quote:
Originally Posted by simple1i

Its 15.7mm thick, slightly chunky, but wearable.

Good 500Mah battery
Play Store
FM Radio
Selfie front facing 2 MP cam
MTK6577 ARM Cortex A9 dual core, 1.0GHz

I bought this watch a few weeks ago and no where is the stock rom for it. if any body has a dump of this rom please send link.
The Closest watch to this one is the Zgpax S5 so following the tutorial I installed twrp recovery with flasify it booted into recovery but no touch screen. I quickly restored the backup stock recovery . However I installed twrp again
to test some things and got Mtktools to work in twrp recovery as well adb, The good.

Here is the bad. After severl days I thought I had restored the stock recovery and decided to install a the battery calibration app as per the S5 tutorial and uninstalled the stock launcher with root uninstaller (there is two launchers, one for the clock face and the other for the defualt luancher, but when I reboot I got stuck at the boot animation every time. so I went to do a factory resest and To my horror I was in the twrp recovery with no way to access the screen . so after several days I was able to use mdktools to install a custom cmw recovery and hit the root button and then I was able to get past the boot animation but I had no launcher, going into settings on the watch I was able to acces androids apps and re-run flasify to restore stock recovery then reset factory defaults, this seemed to work. But....

Now the watch will work with no luncher right after I factory reset the /data partition but after one reboot it locks up again.

I can't access adb or anything in stock recovery.

Any Ideas on a fix If I up what I have ?

Any one have the stock rom. ?

I am working on this and If I get a working rom I will upload, if not I will send everything I have.

If you have this watch please send a reply

Thanks
10th May 2015, 05:00 AM |#4  
Junior Member
Thanks Meter: 0
 
More
!! Working ROM for Iradish I6 (Rooted) built from stock. !!
Quote:
Originally Posted by Crazy Joe

I bought this watch a few weeks ago and no where is the stock rom for it. if any body has a dump of this rom please send link.
The Closest watch to this one is the Zgpax S5 so following the tutorial I installed twrp recovery with flasify it booted into recovery but no touch screen. I quickly restored the backup stock recovery . However I installed twrp again
to test some things and got Mtktools to work in twrp recovery as well adb, The good.

Here is the bad. After severl days I thought I had restored the stock recovery and decided to install a the battery calibration app as per the S5 tutorial and uninstalled the stock launcher with root uninstaller (there is two launchers, one for the clock face and the other for the defualt luancher, but when I reboot I got stuck at the boot animation every time. so I went to do a factory resest and To my horror I was in the twrp recovery with no way to access the screen . so after several days I was able to use mdktools to install a custom cmw recovery and hit the root button and then I was able to get past the boot animation but I had no launcher, going into settings on the watch I was able to acces androids apps and re-run flasify to restore stock recovery then reset factory defaults, this seemed to work. But....

Now the watch will work with no luncher right after I factory reset the /data partition but after one reboot it locks up again.

I can't access adb or anything in stock recovery.

Any Ideas on a fix If I up what I have ?

Any one have the stock rom. ?

I am working on this and If I get a working rom I will upload, if not I will send everything I have.

If you have this watch please send a reply

Thanks

----------------------------------
This is a working rom I built myself using parts of the stock rom and the S5 Got the little guy running again !!!.
In the zip are the stock launchers. (Their is two)
If you bricked it this will fix it! The only one I know of on the net . took me forever.
Try at your own risk it works for the Standard Iradish I6 don't know about the Iradish I6S but it should. See links below for download

This file includes MtkDroid tools and the backup in the backup folder. has all .img files for /recovery /system /boot

Let me know if this helps:
Last edited by Crazy Joe; 10th May 2015 at 05:12 AM. Reason: Adding files
10th May 2015, 07:41 PM |#5  
Junior Member
Thanks Meter: 0
 
More
Downloads
XDA Won't let me send links so here is a .txt file the links..

ROM, Tools, Stock Launchers for Iradish I6 See attachements.
Attached Files
File Type: txt Downloads.txt - [Click for QR Code] (200 Bytes, 26 views)
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes