[DISCUSSION][ROM][5.1]CyanogenMod 12.1 for Bacon[OFFICIAL Nightlies]
- Thread starter the Doctor
- Start date
- Status
Talk to them, then
I am pretty sure they are able to figure that out themselves and get that fixed the proper way.
I just hack things without caring in which particular repository they are, or caring about repo. I prefer straight git over the Python in repo...
In any case, I just finished an unofficial build on my machine, with my change to the default.xml file.
Last edited:
I tried to downgrade from 5/18 to 5/17 but failed (bootloop after optimizing all apps)
And I cannot get into recovery, only fastboot..
I fastboot erase system and found out damn I can't flash zip at fastboot.....
How can I make a img file from the nightie?
And I cannot get into recovery, only fastboot..
I fastboot erase system and found out damn I can't flash zip at fastboot.....
How can I make a img file from the nightie?
Last edited:
Spannaa
Recognized Contributor / Themer
yes, just remember that- I need the system.img in fastboot
anyway to make one now? or anyway to boot into the phone by flashing other system.img
To get rid of my boot loop I had to go back to a Nandroid before the 05/17.
History.
Was running 05/18 for a few days, turned on fastboot, it then went into bootloop.
Tried to load my 05/17 Nandroid no luck, had to load a Nandroid from 05/14 (only one I had prior to 05/17) then flasjed 05/17 over the top.
Now working fine again.
History.
Was running 05/18 for a few days, turned on fastboot, it then went into bootloop.
Tried to load my 05/17 Nandroid no luck, had to load a Nandroid from 05/14 (only one I had prior to 05/17) then flasjed 05/17 over the top.
Now working fine again.
Flash a recovery with fastboot, then boot into the recovery, and install the zip from there.
I cannot boot into the recovery (volume down + Power) even I tried reflashing a new one.
Nevermind
Used fastboot boot recovery.img
Last edited:
You probably can get a system.img only if you build CM yourself. There is a system.img in the out directory then: out/target/product/bacon.
That's pretty big (500MB), so they do some magic to minimize things and create the system.new.dat and system.transfer.list in the zip file. I've never looked into that.
It's strange that you can't get into recovery, though. Press volume down first, then add the power button. Always worked for me.
Last edited:
Spannaa
Recognized Contributor / Themer
twrp is decrypting, it can access cache and data. The missing key input is also on restart of Android system.
Regardless if i start recovery or system there is NO input for the key! It seems as if the device saved the key somewhere. But with this the encryption is not really save, because anyone can start the device.
http://xdaforums.com/showpost.php?p=60866100&postcount=1701
That's the only issue.
I am building unofficial nightlies just fine
D
Deleted member 2044343
Guest
Then it isn't encrypted.
Only the latest TWRP (2.8.6.1) can decrypt the /data partition. That was just released a day or two ago.
I have used encryption of /data since January, and was the first one to report that TWRP didn't decrypt it (https://github.com/TeamWin/Team-Win-Recovery-Project/issues/333)
If you use any previous TWRP, it would prompt for password or pin, but would say "invalid password."
If you don't get that, your /data isn't encrypted.
Last edited:
Bug Report
If anyone calls me my screen is off, i need to turn him with power button on to accept the call
20150517
If anyone calls me my screen is off, i need to turn him with power button on to accept the call
20150517
Put it somewhere else, google drive, mega, dropbox etc
post to androidfilehost, that seems like a great place for a rom.
1. Too much work for a one-off.
2. My DSL connection is currently rather flaky, so uploads probably wouldn't finish (thanks AT&T...)
3. With all these things, there nowadays unfortunately are too many people asking for support, and I have neither time nor patience for that.
I may upload it to my own webserver. I prefer to be in control... But that depends on my DSL connection staying up...
Update: It should now be available via torrent:
http://www.feise.com/~jfeise/Downloads/cm-12.1-20150521-UNOFFICIAL-bacon.zip.torrent
md5: 2c8383584fd2ccc451969e9836fcd36d cm-12.1-20150521-UNOFFICIAL-bacon.zip
Last edited:
- Status
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
31CyanogenMod 12.1 (Android 5.1) Official Nightlies Discussion Thread
Source: wiki.cyanogenmod.org
Changelog:
http://cmxlog.com/12.1/bacon
Download Links:
1. CM12.1 ROM: http://download.cyanogenmod.org/?device=bacon
2. Android 5.1 Gaaps:- Google Apps Minimal Edition by @jajb
- Gapps from CyanogenMod
- BaNkS Gapps
- Slim gapps by @dankoman
- Slim gapps with @Calkulin Wakelock fix, COS12 CameraNext, MaxxAudioMod by @mohit310
- TK GApps, the official continuation of the original PA GApps project from the original PA GApps Developers.
Flashing Instructions
Comprehensive installation instructions for CM on the OnePlus One can be found on the CyanogenMod Wiki: http://wiki.cyanogenmod.org/w/Install_CM_for_bacon
Note: If you are flashing from CM11/CM12, you MUST flash 5.1-compatible gapps after flashing the ROM!
1. Download the nightly and move it to your SD card.
2. Download gaaps and move it to your SD card. [This step is optional.]
3. Reboot into the custom recovery of your choice.4A. Flashing dirty from CM11/12: Wipe cache/dalvik cache.
4B. Flashing clean: Full wipe.
5. Flash cm-121-2015xxxx-NIGHTLY-bacon.zip.
6. Flash gapps.zip. If flashing dirty from CM11/12, then you must reflash 5.1 compatible gapps (link above).
7. Reboot
For those having problems with apps crashing:
Rooting:
This is a pre-rooted ROM, so there is no need to flash SuperSU!
1. Enable Developer options by going to System » About tablet and clicking Build number rapidly 5-7 times.
2. Under Developer options, click Root access and select Apps only, then Ok.
That's it!
Known Issues:
(I will keep this updated)
- Camera still splits the exposure when using the flash
- You tell me
25Starting from CM12.1 today's nightly, a new sound panel is included in power menu, whose source code has been written by me.
To enable it, go to Settings - Buttons - Power menu and enable "sound panel".
This sound panel is available for all devices supported by cm12.1.
If you have problems, please let me know.
http://review.cyanogenmod.org/#/c/100452/11
1. Too much work for a one-off.
2. My DSL connection is currently rather flaky, so uploads probably wouldn't finish (thanks AT&T...)
3. With all these things, there nowadays unfortunately are too many people asking for support, and I have neither time nor patience for that.
I may upload it to my own webserver. I prefer to be in control... But that depends on my DSL connection staying up...
Update: It should now be available via torrent:
http://www.feise.com/~jfeise/Downloads/cm-12.1-20150521-UNOFFICIAL-bacon.zip.torrent
md5: 2c8383584fd2ccc451969e9836fcd36d cm-12.1-20150521-UNOFFICIAL-bacon.zip1010For the new CM 12.1 nightly (post 20150418), you have to use the official Cyanogen recovery for properly restore your current GApps. An alternative solution for now, a modified TWRP with current CM 12.1 kernel (f2fs support included): http://goo.gl/G2T5yY Please check http://review.cyanogenmod.org/#/c/95349/
Too lazy to set up TWRP recovery build for now, please tell TWRP developer about this transparent lz4 compressed ext4 issue.
New posts
-
-
-
Development [ROM][14][OFFICIAL][STABLE] [ProjectBLaze] [raven][15-04-2024]- Latest: GROOVYJOSHCLARK
