[Q&A/T][ROM]DN3(Ditto Note 3)

Search This thread
S

sawdoctor

Guest
Hey! Can i flash the DN4 rom on my Note 2 (ATT I317)? I'm asking because on the Eteam page is ony available for N7100 :(
As long as you flash the one from the at&t thread you'll be fine

Sent from my SM-N910F using Tapatalk

---------- Post added at 06:09 PM ---------- Previous post was at 06:08 PM ----------

I saw someone on Facebook saying they are updates to version 2.6? My latest update is 2.4?
We pushed a new ota 2 days ago so check your ota app

Sent from my SM-N910F using Tapatalk
 

EddMonterroza

Member
Oct 24, 2014
19
7
Santa Ana
As long as you flash the one from the at&t thread you'll be fine

Sent from my SM-N910F using Tapatalk

I have to donwload this (For LTE)?

ZFMhtex.jpg


Btw, im very noob, I flashed the DN3 like 2 months ago :D
Thnaks for answering so fast :D
 
S

sawdoctor

Guest
I have to donwload this (For LTE)?

ZFMhtex.jpg


Btw, im very noob, I flashed the DN3 like 2 months ago :D
Thnaks for answering so fast :D
This is a direct link for the correct version
http://www.mediafire.com/download/02bz4az5doovze6/DN4_v2.2-LTE.zip
If you are already on agni kernel you will have no issues, if you aren't and you flash the rom then get blackscreen don't panic. This happens sometimes if you come from stock kernel all you need to do is flash agni kernel and it will boot up fine. Dont forget to go to the ota app after you install and get the ota

Sent from my SM-N910F using Tapatalk
 

EddMonterroza

Member
Oct 24, 2014
19
7
Santa Ana
This is a direct link for the correct version
http://www.mediafire.com/download/02bz4az5doovze6/DN4_v2.2-LTE.zip
If you are already on agni kernel you will have no issues, if you aren't and you flash the rom then get blackscreen don't panic. This happens sometimes if you come from stock kernel all you need to do is flash agni kernel and it will boot up fine. Dont forget to go to the ota app after you install and get the ota

Sent from my SM-N910F using Tapatalk

Thanks a lot, i just flash it and all works <3
 

Juank1

New member
Aug 3, 2011
2
0
Help mister wizard! I broke the dictionary popup.

Hi folks.
I was having trouble downloading the English dictionary so I decided to wipe data & cache for the dictionary app using application manager thinking it would correct the issue, bad idea. I lost the pop up window entirely.
restoring stock ROM with standard wipe from twrp and flashing dn4 2.2
also with standard wipe and flashing both ota failed to restore the pop up.
oh I also restored my data after after the 2nd OTA. Don't know if that could cause the problem.


Any ideas on how to restore that dictionary app and also I don't understand how to download that dictionary.

NEW RULE NEW RULE.
A nube like my should read before wiping or flashing.
Thanks in advance.
John
 

aradhaya10

Senior Member
Dec 18, 2012
124
11
Im am having a software question of sorts
My samsung keyboard is incapable of typing using the swipe method and i was wondering whether it is only a problem with My keyboard...thank u

Sent from my SM-N910C using XDA Free mobile app
 

absinthesummer

Account currently disabled
May 16, 2012
1,150
1,337
Usa
meettomy.site
Im am having a software question of sorts
My samsung keyboard is incapable of typing using the swipe method and i was wondering whether it is only a problem with My keyboard...thank u

Sent from my SM-N910C using XDA Free mobile app
In keyboard settings > samsung keyboard did you change input from none to continuous input? That's the swipe function. It's off by default.
 

aradhaya10

Senior Member
Dec 18, 2012
124
11
I did put it on continuous but it keeps only typing the previous word I typed no matter where I swipe
I like the Samsung keyboard so using SwiftKey over it feels kinda pointless hence I asked

Sent from my SM-N910C using XDA Free mobile app
 

Bajanman

Retired Forum Moderator
Jun 17, 2009
8,897
9,577
Los Angeles Ca.
This is in the main thread if you would have searched ?. Anyway go back to the Samsung keyboard and open setting, click on the select input languages and download English. Then try swipe again should work ok.
Lmk if that was you problem ?
I did put it on continuous but it keeps only typing the previous word I typed no matter where I swipe
I like the Samsung keyboard so using SwiftKey over it feels kinda pointless hence I asked

Sent from my SM-N910C using XDA Free mobile app
 

mpore14

Senior Member
Jul 25, 2012
243
110
Samsung Galaxy S21 Ultra
Null IMEI, Insert sim card.

HI, thanks for the ROM, I am very excited to use this.
I've already installed the ROM successfully DN4 v2.2 LTE but I get an insert sim card error and a Null IMEI.
If it will help, my carrier is Globe Telecom. Using an LTE-capable sim. Thanks!
 

absinthesummer

Account currently disabled
May 16, 2012
1,150
1,337
Usa
meettomy.site
I did put it on continuous but it keeps only typing the previous word I typed no matter where I swipe
I like the Samsung keyboard so using SwiftKey over it feels kinda pointless hence I asked

Sent from my SM-N910C using XDA Free mobile app

This is in the main thread if you would have searched ?. Anyway go back to the Samsung keyboard and open setting, click on the select input languages and download English. Then try swipe again should work ok.
Lmk if that was you problem ?
Exactly Baj. Definitely need at least one language.

Also when mine had issues I downloaded the English language, turned on predictive text (plus secondary options), put it on continuous input. If you don't do this right after initial setup, swipe will be glitchy due to the stored data from when it was set to none.

To fix go to settings > application manager > all > samsung keyboard. Clear the data for the Samsung keyboard. Then go back to language & input and grab the language pack and set it on continuous input. Clearing the data for the keyboard and then immediately setting the keyboard the way you want will fix any issues you may be having.
 
  • Like
Reactions: Bajanman

paper183

New member
Aug 22, 2011
3
0
DN4 on Galaxy Note 2 Reboot to recovery permanent

Hello, I am on a sgh-i317m with TWRP 2.8.7.0
I have wiped everything and flashed DN4 2.2, i had a recovery boot loop problem that was fixed by flashing AGNi kernel.
Everything seems to work fine so far, I also updated with the OTA update to 2.4 (says 2.2.6 in device info I believe).
However, every time I use the power button menu shortcut to boot into recovery I cannot boot into system anymore until I flash kernel again.
Normal reboot works fine, recovery reboot triggered by the ota update worked fine, it seems like it's only a problem when I go to recovery from the power button menu.
I tried AGNi kernels 4.3.9 and 4.4.5 (latest) but they both do the same thing.
I used search but found no post with the same problem.

Thank you.

Edit: I found a lot of info on flashing agni after an install but not every time i use recovery, maybe it's the same problem ?

Edit2: Installing a zip with TWRP Manager from the store had me stuck in recovery again after the reboot until I reinstalled the kernel again.
(just sharing as much info as I can for debug)
 
Last edited:

Bajanman

Retired Forum Moderator
Jun 17, 2009
8,897
9,577
Los Angeles Ca.
Hello, I am on a sgh-i317m with TWRP 2.8.7.0
I have wiped everything and flashed DN4 2.2, i had a recovery boot loop problem that was fixed by flashing AGNi kernel.
Everything seems to work fine so far, I also updated with the OTA update to 2.4 (says 2.2.6 in device info I believe).
However, every time I use the power button menu shortcut to boot into recovery I cannot boot into system anymore until I flash kernel again.
Normal reboot works fine, recovery reboot triggered by the ota update worked fine, it seems like it's only a problem when I go to recovery from the power button menu.
I tried AGNi kernels 4.3.9 and 4.4.5 (latest) but they both do the same thing.
I used search but found no post with the same problem.

Thank you.

Edit: I found a lot of info on flashing agni after an install but not every time i use recovery, maybe it's the same problem ?

Edit2: Installing a zip with TWRP Manager from the store had me stuck in recovery again after the reboot until I reinstalled the kernel again.
(just sharing as much info as I can for debug)

You can't boot into the system after rebooting from recovery? Sounds weird to me. And you're correct never heard of your problem either :)...

Fyi DO NOT USE Twrp manger! I know someone who soft bricked their phone flashing the latest Twrp from it ok. Better using a zip from recovery or tar in Odin.
Question was the power button functioning correct b4 flashing this Rom? That is the main part of everything. ?
 

paper183

New member
Aug 22, 2011
3
0
You can't boot into the system after rebooting from recovery? Sounds weird to me. And you're correct never heard of your problem either :)...

Fyi DO NOT USE Twrp manger! I know someone who soft bricked their phone flashing the latest Twrp from it ok. Better using a zip from recovery or tar in Odin.
Question was the power button functioning correct b4 flashing this Rom? That is the main part of everything.

Yes there was no problem with the power button on stock rom, but I was using TWRP 2.3.x, I had to upgrade it to install dn4 correctly.
Thanks for the tip about twrp manager, I used it to flash the boot animation so i could determine if the problem came form the power button menu but now it seems to me like the recovery might be at fault. I will try another version.

Edit: this post confirms what I thought http://xdaforums.com/showthread.php?t=1981198&page=127
TWRP 2.8.6.0 & 2.8.7.0 for hlte/t0lte have a bug for power/reboot, 2.8.5.0 is fine
 
Last edited:

Bajanman

Retired Forum Moderator
Jun 17, 2009
8,897
9,577
Los Angeles Ca.
Yes there was no problem with the power button on stock rom, but I was using TWRP 2.3.x, I had to upgrade it to install dn4 correctly.
Thanks for the tip about twrp manager, I used it to flash the boot animation so i could determine if the problem came form the power button menu but now it seems to me like the recovery might be at fault. I will try another version.

Edit: this post confirms what I thought http://xdaforums.com/showthread.php?t=1981198&page=127
TWRP 2.8.6.0 & 2.8.7.0 for hlte/t0lte have a bug for power/reboot, 2.8.5.0 is fine
Must be the tolte versions?? I've been on 28.6.0 since it was released without any problems. But I'm using the i317 & T889 and both have 2.8.7.0 atm with no issues.
Think you'd need a logcat for biggbiff to find the problem. But if 2850 works stick with it ya know.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    [SIZE=+2]This thread has been created
    for
    Questions & Answers/Troubleshooting
    [/SIZE]​
    [SIZE=+2]Specific to[/SIZE]

    14ecllz.jpg

    for SGH-i317, SGH-i317M, N7105 from Electron Team (E-Team)

    Click link here>> Link to Development thread <<Click link here


    Please feel free to share issues, questions and offer help

    It is always best to thank a ROM OP, in lieu of simply posting "Thank you".

    redLine.png

    Please keep discussion focused, on the topic described in the OP
    redLine.png
    6
    FAQ.jpg


    This section is under construction, We'll be updating with more info soon...


    BASICS

    Q. I can't see the downloads in the OP?
    A. If you are using an app like Tapatalk or Xda forums go to the OP, then click the menu button (either hard menu button or the 3 dot menu) and select web view. These apps often don't show the whole posts on these forums.

    Q. How do I get in to recovery?
    A. Click and hold the Power button, Home Button and Volume Up Button

    Q. How do I get in to download mode
    A. Click and hold the Power button, Home Button and Volume Down Button

    Q. How do I install and/or navigate TWRP/CWM/PhilZ
    A. It is best to follow the instructions on their respective sites/forums.

    What bootloader do I need to be on?
    A. Any. Keep in mind 4.1.2 and earlier will not have wifi unless you flash AGNi Kernel
    and 4.3 boot loader will not be able to charge while the power is off (it will force the phone to turn on)

    How do I check the bootloader version?
    https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
    MK6 is 4.3 Bootloader for AT&T
    MJ4 is 4.3 Bootloader (from Leak for AT&T)
    NF3 is 4.4 Bootloader for Rogers
    NF1 is 4.4 Bootlaoder for Rogers+Bell+Telus

    I can't charge the phone when the power is off?
    A. You are likely on boot loader 4.3 or below...
    You either have to live with it - or upgrade the bootloader to 4.4

    Want to CHARGE your phone while it's turned off. Like it was on 4.3??
    A. Then flash the Shift kernel
    It's been confirmed by @absinthesummer working on DN5v2 Rom, with the old 4.1.2 bootloader!!!
    Q. How do I upgrade boot loader to 4.4?
    A. Look here for more info on the Bootloader upgrade...
    Thanks to Zen Arcade
    My recovery said I don't have SuperSU installed. Should I let it install it?
    A. No. Always do this yourself - Flash SuperSU 2.02
    Then go to the Play Store and upgrade to the latest version.

    Q. How do I install SuperSU?
    A. Best is to flash SU Version 2.02, SU Version 2.02 then boot up the phone the SuperSU app may or may not be installed, if not go to the play store and install it.
    Open it>it will prompt you to update the SU binary> go ahead and do that using either method (i use the first option)

    Q. When flashing the ROM, the flash fails, why?
    A. If flashing with Twrp and after wiping your complete system (including internal). When you try to flash the Rom and you get a Failed!! Then reboot recovery which will tell you no Os installed. Swipe to reboot the recovery, then it going to ask if you want to flash Root. Just hit DO NOT INSTALL and the phone will reboot. Then find your Rom on your external Sd card. Flash the Rom let aroma finish and enjoy..
    If that don't work then you can try this recovery PhilZ Touch


    I flashed the ROM and it is stuck at the boot logo??
    Make sure your download of the ROM is correct (check the MD5 - instructions see below)
    Reboot to recovery
    (first try flashing without wiping, if that does not work - retry by wiping internal, then rebooting in to recovery again)
    flash the rom again
    when flash finishes, let the phone reboot.
    the boot logo should come up. Sometimes it can take a LONG time to boot up the first time (5+ minutes) so give it a chance.

    Q. How do I check the MD5 of my download?
    A. Once the file is on your device, download ES File Explorer (or any other program capable of checking MD5). Navigate to the ROM.zip - long press to select - select properties - select Show checksum - Check the MD5 box, and click Calculate.
    Then compare the MD5 of your download to the official MD5 (in download section)

    Q. What are the best settings for AGNi?
    A. There are no best settings - but this seems to work well for others: http://xdaforums.com/showpost.php?p=54230324&postcount=8668

    I am unable to write to SD card?
    A. Download and run this: https://play.google.com/store/apps/details?id=nextapp.sdfix&hl=en
    B. if that doesn't work, some have had luck with this: https://play.google.com/store/apps/details?id=com.devasque.fmount

    Networks, WiFi, GPS
    Why is my WiFi not working?
    A. There is a good chance you are on 4.1.2 or earlier boot loader - just go download the latest AGNi version and flash that.
    B. Latest AGNi and Devil Kernels located here>>Agni & Devil Kernels Mirror

    Why am only seeing 4g, 3g, H icons in the status bar?
    A. Because the Rom is based off the international note 2! You can flash one of the build prop zips in the download section, to acquire your correct icons.

    I am having an issue locking GPS.
    A. First switch setting to GPS only
    Go outside, open maps, let it try and get a gps lock (can take upwards of 10 minutes)
    Try flashing the GPS fix file for your carrier (in downloads section)
    Go outside, open maps, let it try and get a gps lock (can take upwards of 10 minutes)
    Try using a GPS lock fix app:https://play.google.com/store/apps/details?id=com.eclipsim.gpsstatus2 or https://play.google.com/store/apps/details?id=com.androidlab.gpsfix
    Try using TopNTP: https://play.google.com/store/apps/details?id=by.zatta.agps
    or this one: https://play.google.com/store/apps/details?id=com.cochibo.gpsstatus
    If none of the above steps have worked for you then try this Gps Location apk Found by- Sawdoctor

    Does download booster work?
    A. Not yet. This is ported from the N7100 which does not have LTE - therefore, no working LTE download booster. We are working on a few things so MAYBE we will get this to work.

    Q. Internet only works on Wifi, why can't I get regular internet over network?
    a) Check your APNs.
    b) Choose a different one, then choose yours again
    c) delete all of them, then re-add the appropriate settings for your APN

    Q. Apps are showing that WIFI is on all the time. How do I change this?
    A. Settings>Wifi> Advanced Settings> Uncheck Always allow scanning

    Q. How do i get the LTE icon (such as on the i317M Canadian Edition)
    A. Install GravityBox [KK]
    Statusbar tweaks>signal cluster settings>LTE indicator style>Click LTE
    You may get a boot loop the first time installing the module from XPOSED:
    reboot in to recovery>wipe cache and dalvik> reboot

    Q. I am not getting LTE?
    A. You might be - Go to Settings>About Device>Status>Mobile Network Type (it may say LTE here)
    If it says LTE, then you ARE getting LTE - you just don't have the right logo in the notification bar.

    To change the network logo in the notification bar:
    Flash the build.prop for your model / carrier.
    OR
    Manually use ES File Explorer
    Click the little globe / phone icon in the top left (menu button)
    scroll down to Root Explorer (Turn it on)
    click on the actual word Root Explorer not the on/off button
    Mount R/W
    switch /system from RO to RW and click OK
    navigate to /system
    scroll down to build.prop and select it
    Open with ES Note Editor
    Change the value of lines: (don't enter all values, just the one that you want)
    ro.product.model=SGH-I317M/SGH-I317/
    ro.product.name=t0ltetmo/t0ltecan/t0lteatt
    ro.product.device=t0ltetmo/t0ltecan/t0lteatt
    ro.build.product=t0ltetmo/t0ltecan/t0lteatt
    Just fill it in for your device:
    tmo: tmobile
    can: canada models (all)
    att: AT&T
    exit and save.
    switch the /system from RW back to RO the same way we did above.
    Reboot the phone

    Alternate GPS Fix according to Bajanman:
    Advanced:
    1. Open the file explorer and go to System/etc (gps.config)
    2. (optional) backup original gps config to etx Sd card
    3. Then delete that same file (gps.config)
    4. Now find the downloaded Gps file location and extract it!
    5. Go to the extracted folder and copy the (gps.config) file.
    6. After that go back to System/etc and copy it there! DO NOT FIX PERMISSIONS
    7. Reboot your system and run a gps app see if it works..
    Basic:
    1. Flash the Zip for your model.
    Here are the files:
    AT&T – http://d-h.st/Ihd
    T-Mobile - http://d-h.st/9X0
    All models- Gps Location apk

    Q. I can't get mms to work on straight talk?
    A. Some people have issues getting it to work with the stock message app & download alternate such as textra from the play store & put in the APN, and it worked for some.

    Q. Is there a modem in the rom?
    A. No

    Other Questions/Miscellaneous
    Grey-Scale mode isn't working when turning on power saving mode?
    A. Go to AGNi controls application and turn off MDNIE hijack (this setting removes the ability for the ROM to control the screen - thereby unable to change to grey scale.)


    Q. How do I fix the font size?
    A. If you chose the S5 Settings menu:
    Settings>Accessibility>Vision>Font Size

    Q. Why is Air Command not working?
    A. There is a good chance it's not turned on...
    Settings>S Pen>Air Command (turn on)
    If that doesn't work? - Re-flash is probably best bet.

    My CPU speed is not going above 1200 MHz?
    A. Enable everything in power saving mode, then disable it - this usually clears it.

    Q. I'm having screen wakeup issues?
    A. @adam5150 modified the keyguard.zip to go back to the old one:
    download and flash Keyguard.zip: https://mega.co.nz/#!pdEESZgR!TSjZ_5...XSC7Y2ta72KWyU

    Q. My phone randomly has SOD (Screen of death) where it goes to sleep but won’t wake-up unless I hard reboot. Suggested fixes?
    1) Use Wanam Xposed to DISABLE Samsung DVFS
    2) Use the AGNI settings provided by http://xdaforums.com/showpost.php?p=54230324&postcount=8668 @Bajanman

    Q. How do I get F2FS to work?
    A. On 3.1.1 (Android 4.3) Psycho4US4 had luck using TWRP to format system, cache, and data as F2FS then flashed the rom according to instructions - and that was it.. give that a shot. - after you boot up, use DiskInfo to check the filesystem to confirm its F2FS https://play.google.com/store/apps/details?id=me.kuder.diskinfo
    On DN3V5.2 - f2fs has not worked reliably as of yet.

    Q. A specific settings is already checked (or unchecked) in the position I want it to be but it isn't working. What should I do?
    A. Try checking it on and off a couple times then set it the way you want. Sometimes after a flash these settings get stuck in the on position.

    My Menu button doesn't work?
    A. Does it open up your recent programs?
    If so, then that means you selected the S5 remapped keys - to change back just re-flash the rom and select a different option.

    Q. Music player (S5 Version) keeps skipping when the screen is off?
    A. Raise the minimum cpu threshold – it’s a galaxy s5 music player bug - and that’s how they fix it on the n7100

    Q. News and stock wall wasn't working?
    A. Install from this thread: http://xdaforums.com/show....php?t=1829023
    afterwards, had to re-install APN to get data / LTE

    Q. How do I get rid of the birthday notification?
    A. Find homescreenfestivaleffect.apk and force close it and clear cache and data. You can also freeze it if you want to - might work
    also try: SPlanner-->Calendars-->Tick and untick "All calendars"

    Q. How can I hide the s finder and quick connect pull-down?
    A. use Xposed g-touchwiz: https://play.google.com/store/apps/d...posed.touchwiz
    How do you get the S Finder and Quick Connect icons?
    A. Switch to the Tmobile version (see settings below for how to switch LTE logo.
    Q. The S Finder and Quick Connect buttons disappeared from the drop down menu when I tried switching to AT&T build.prop.
    A. Bajanman suggests flashing this: http://d-h.st/2qj

    Q. I am not getting text notifications on my lock screen
    flash the build.prop for your device from the OP
    Q. What apps can I remove from this Rom? Bloatware?
    A. We don't necessarily suggest this - TW does tend to be very interrelated, deleting one thing can cause other things to not work regardless here is a list:
    http://www.droidviews.com/list-of-...g-galaxy-devices-that-can-be-safely-removed/

    Q. Screen Mirroring Doesn't work:
    A. Use Triangle Away to reset flash counter (allsharecast / screen mirroring looks at this for whatever reason)
    There is a Samsung screen mirroring patch in the app store that fixes it in 4.4

    Q. How to turn off the voice I hear when I receive a call?
    A. Dialer> settings> call> answering and ending calls
    Make sure all options in there are unchecked.

    Q. How to revert to S5 Build Prop?
    A. https://www.dropbox.com/s/60ew662gsv89cu0/Build.prop_S5.zip?dl=0
    Q. Note 2 Build Prop?
    A. https://www.dropbox.com/s/nd8yw1dsc6w5uvw/Note2_build-prop_flashable-signed.zip?dl=0

    Q. How to turn off indexing to reduce lag?
    A. http://xdaforums.com/showpost.php?p=54675106&postcount=34504

    Q. Sometimes Scrapbook fc after saving?
    A. http://xdaforums.com/showpost.php?p=52968588&postcount=30143 This post has a fixed version of Scrapbook

    Q: I have xyz issue. How to fix?
    A. In general please read carefully the first post (OP). Did you do all suggested steps there? Please try to search in xda or using google. In google for example: “your problem” forum xda
    When asking for help in thread, please provide the following:
    1.install steps
    2.rom version
    3.installed mods
    4.the problem you are having with the rom including the steps bevor the problem occurs
    5.attach logcat

    Q:What is logcat and how can I do that?
    A. A Logcat file records system messages. This helps devs to look for the error.
    Please find: http://xdaforums.com/showthread.php?t=17262388
    DN3 OPTIMIZATION AND POWER SAVING GUIDE
    http://xdaforums.com/showpost.php?p=51688539&postcount=20603
    It's really worth to read this! Thanks to @passenger001
    "If you freeze all suggested apps, it may cause some of the rom features fc/not working, so read the whole post, try to understand what is meant on brackets, if you don't understand, don't freeze that, if without understanding you freeze all and later found something fishy with the rom, you have to flash the rom again." thx to @nitol for this hint

    Q: I observe a high battery draining. What can I do?
    A. http://xdaforums.com/showpost.php?p=46130255&postcount=6 thanks to @wanam and @wesamothman
    and http://xdaforums.com/showpost.php?p=53524390&postcount=32928 thx to @singhpratik87

    Q. I would like an app that allows me to avoid the use of my device hardware buttons
    A. LMT Launcher: http://xdaforums.com/showthread.php?t=1330150
    OR
    AIO Gestures: https://play.google.com/store/apps/details?id=com.phoenixstudios.aiogestures

    Q: Is DN3 rom knox free?
    A. Yes it's absolutely knox free.

    Q. Private mode is not working?
    A. Private mode is linked to knox and knox is disabled in DN3.
    So private mode will not work.


    Q: Why are Air Gestures and Finger View not working?
    A. Note 2 doesn’t have necessary hardware sensors for that like Note 3. So it won't work!

    Q: I am using xyz mod and facing issues:
    A. Please be careful using mods, as they are maybe not fully compatible with the rom for now. Always make a backup before modifying!

    Q: Where are the developer options?
    A. Go to settings, general, device info and tap on “build number” 5 times.

    Q. What is ART and why it doesn't work?
    A. Don't select ART as it will cause bootloops!!!
    https://source.android.com/devices/tech/dalvik/art.html
    http://xdaforums.com/showpost.php?p=50998474&postcount=14908
    So ART is in experimental state (Google) and it won't work with TW roms and has to be fixed from Samsung.
    http://xdaforums.com/showpost.php?p=50994362&postcount=14857
    Also, Xposed is not compatible with ART just yet.

    Q. I accidently enabled ART and now my phone is in bootloop...
    A. Use the revert to dalvik zip listed here- http://xdaforums.com/showpost.php?p=51682367&postcount=1
    Flash in recovery and it should fix your problem.

    How do I change touch sounds?
    A. http://xdaforums.com/showpost.php?p=52503325&postcount=25424 thx to @KNIGHT97

    S5 music Music package that works on DN3v5?
    A. http://xdaforums.com/showpost.php?p=52589702&postcount=26582 and thx to @slink_59

    Q. How do I enable missing motion features:
    A. Follow this: http://xdaforums.com/showpost.php?p=52722445&postcount=27773 thx to @smeet.somaiya

    Q. How do I enabling Quickmemo during calls by using Note 2 dialer and contacts?
    A. Follow this: http://xdaforums.com/showpost.php?p=52763197&postcount=28067 thx to @Logel and @kogeorg

    Q. How do I add multiuser functionality to DN3 v5?
    A. http://xdaforums.com/showpost.php?p=52777912&postcount=28173 thx to @nitol

    Q. How to delete a user after activation of multiuser?
    A. Follow this: http://xdaforums.com/showpost.php?p=53033127&postcount=30877 thx to @gencho81
    4
    faq_What_Where_When_Who.png

    Additional Q&A/T Information

    DN3 development threads are intended for developmental purposes only, which means that posts should be focused solely on bug reports (with logcats) and assistance to further improving the ROM. Development threads in general are by no means a 24/7 tech support service but everyone needs some help every now and then and that is the purpose of this thread.

    Most of you should already be aware that Q&A threads such as this are intended to clear any off topic posts and questions from the development threads to the Q&A/T thread, thus keeping the development threads clutter-free and ON-topic.

    Any discussions concerning battery life, custom kernels, 3rd party apps, mods, etc.. will be posted in this thread along with any other general questions or topics NOT pertaining to the development of the project itself.

    Any and all questions are welcome here but you must ALWAYS remember to search as well as read the FAQ and the OP of the original thread prior to posting questions. You stand a better chance of finding the answer to your question yourself by performing these tasks and it's a great feeling.

    Additionally, no one should answer to OT questions asked on the development threads but instead, when convenient, respond with something like "Please use the Q&A/T thread for this kind of question". Consecutive OT posts will be moved here to Q&A/T as required.

    One last thing, if someone in this thread helps you, please take a second to click their 'thanks' button! Someone has taken the time to assist you, and clicking thanks will make them feel appreciated so they come back the next day and help someone else! You get 8 thanks a day, don't be stingy with them! (I'm not even talking about me. I'm not looking for 'thanks'. Save them for others who directly answer your questions. They will deserve it.

    The best way to ask for help in this thread!

    Please try to provide as much of the following information as possible when posting your issues for the best possible support from myself or the community.

    1. ROM version
    2. Recovery + version
    3. Kernel + version
    3. Bootloader + version
    4. Mods if any
    5. Troubleshooting steps
    6. BE AS SPECIFIC AS POSSIBLE!!!!


    **Agni 4.2.5 Setting**
    Agni Set-up below are with these setting running all the time!!!
    • Wi-Fi=Always on
    • Bluetooth=Always on
    • Data=Always on
    • Gps=Only use when needed
    • Google Now= Active
    • Ok Google "hot word" detection =On
    1. Agni Main Profile--[Agni-Normal-Optimized]
    2. Governor--[ZZMooveZane-inZane] Current and my personal choice.:good:
      Governors tested:>PegasusqPlus, Pegasusq(default), Pegasusq-Speedmod, ZZMoove-perforamce, Lulzactiveq & Lulzactiveq_mod.
      I've personally used all these governors but it's up to you, the user to find your best choice...
      The Lulzactiveq governor was actually made for the note 2 for those that didn't know.
    3. Scheduler (int Sd)--[Noop]
    4. Scheduler (ext Sd)--[CFQ (default)]
    5. CPU Max Frequency--[1704Mhz]
    6. CPU Undervolting--[Stock]
      User choice to Undervolt your system
    7. CPU Min Frequency-- [200MHz (default)]
    8. GPU Frequencies--[266/350/440/533/640]
    9. GPU Undervolting--[Off (default)]
    10. GPU Threshold--[Performance]
    11. LED fading--[Fade (dark)]
    12. LED Speed--[1x(stock)]
    13. LMK minfree--[Light]
    14. AC Charge Rate--[1900mA (default)]
    15. USB Charge Rate--[475mA (default)] Changed to 700mA
    16. Ignore Unstable Charging Power--[Off (default)]
    17. AGNi preloadSWAP 512MB--[Off (default)]
    18. Touchboost--[Off (default)]
    19. Touch Wake--[10 sec] [You'll have 10 sec to wake the phone after (Auto) screen timeout].
    20. InternalSD read_ahead_kb--[512]
    21. ExternalSD read_ahead_kb--[1024]
    22. Power Saving Load Balancer--[Off (default)]
    23. LZ4 ZRAM SIZE--[500MB]
    24. Swappiness--[60]
    25. Frandom RNG--[Off (default)]
    26. AGNi extSdCardsdcard Switcher--[Secondary Storage-->sdcard (default)]
    27. Touchkey Lighting Scenario--[Lights up only on h/w keys (default)]
    28. MDNIE HIJACK--[Natural]Turn this off if you want Power saving mode Grey-scale to work!!!
    29. MDNIE HIJACK SHARPNESS--[On]
    30. Dynamic FileSync V1.2--[On]
    31. AGNi FileSystem Checking on Boot--[Off (default)]
    32. AGNi Battery Stata clear on Boot--[Off (default)]


    Big Thanks to FireBird_89 for assisting in this Q&A Section
    4
    WOW didn't even read what I wrote??? " XPOSED IS NOT SUCCEEDING" as in all 3 settings under notification, theme, and system, are NOT working... I was basically asking what file I can edit in DN4 2.2 to remove it... Because Xposed basically just edits for noobs... and lazy people
    That's kind of ride rude. If you don't fall into those categories (noob or lazy person), then I assume you know how to search xda? Or Google? It's in system ui. You need to decompile it, edit the files in res/layout... namely, status_bar.xml & dimens.xml (line is "carrier" which can also be searched in notepad++). Reduce carrier text size and carrier label height to 0.0dpi. Recompile. Push back into system/priv-app & fix permissions. I'm sure you know what to do from there.

    Those are pretty clear instructions but you can also search and find step by step instructions with pictures ;) good luck!
    4
    Air Command Themes for Air COmmand Supported ROMs.

    General Info

    As per @Bajanman post, he has managed to get permission from the OP of this awesome thread for us to convert the Air Command Themes to be compatible with our Note II variants. I will try my best to help and covert those awesome themes for use on our Note II.

    ALL CREDITS AND THANKS should go to @sibinn for the awesome themes so please go click on the "Thanks" button in his thread.

    Thanks to @Bajanman for getting the permission from sibinn.

    Thanks to @sawdoctor and Bajanman for allowing this mod to exist here.

    Do take note that I DO NOT TAKE REQUESTS FOR CREATING NEW THEMES. I'm no themer nor developer. Just an old dog learning new tricks. What I can do is help convert the themes to make them compatible with our Note II. The only stuff I know about Photoshop is copy, cut, paste, resize and save. So, if you want any custom themes, please find someone who has that talent to do it for you. I'm of no help to you.

    Features:

    - Aroma Installer will be provided for easy changing of your theme.
    - Modded files will be backed up so you can restore to original as and when you feel like using the Aroma Installer.
    - An Emergency Reset Flash Zip is created upon first use so that if anything goes very wrong, you can flash back to your original files.

    Devices supported currently:

    All Note II variants should be supported. However, the following are confirmed.

    GT-N7105 t0lte
    SGH-I317 t0lteatt - reported to be working with DN3 v4 Beta 1 ROM

    Need further comfirmation

    SGH-T889 t0ltetmo - reported NOT working with DN3 v4 Beta 2 ROM
    SGH-I317 t0lteatt- reported NOT working with DN3 v4 Beta 2 ROM

    If you are willing to, please give it a try as I do not own any other variants. Please kindly report the results so others will be able to benefit.

    All Air Command supported ROMs should work. The following is confirmed by user.

    1 user has reported that it worked on the DN3 v4 Beta 1 Rom.

    Again, if you are willing to, please give it a try on other ROMs. Please kindly report the results so others will be able to benefit.

    Flashing Instructions:

    - Tested to work using TWRP 2.7.0.2 recovery for GT-N7105 t0lte to flash.
    - No wipe is needed.
    - Just boot into recovery and flash zip.
    - Reboot from recovery after flashing.

    In Case of Bootloops



    Problem of bootloops solved. Rebooting automatically from aroma installer is causing the bootloops. I have disabled the function so you just need to reboot from the recovery instead (1 extra, safer, step). However,

    1) If you encounter bootloops or stuck at sammy logo, please reboot into recovery and try to revert to original using the installer.

    2) If that fails, please use the Reset flash zip (should be a ~11mb file) that can be found in the root of your internal sdcard. Flash it as a normal flash zip.

    3) For DN3 v4 Beta 2 ROM users only: Download the separate Reset flash zip to try to restore the framework-res.apk as a last resort.

    If all of the recovery method fails, I'm sorry to mess up your device. Hopefully you did a nandroid backup. Please do not try to use this installer any more.


    Downloads:

    v2.2.0
    AM_Air_Cmd_Themer_v2.2.0.zip
    MD5: 15d437c9e0fbfdacea4dd486252c6854

    Emergency Reset Flash Zip
    Stock_Reset_For_DN3v4_Beta_2_Rom_ONLY.zip
    MD5: ad2b0b1732efb814a026f8e1127ad577

    Changelog:

    VERSION v2.2.0
    Date released: 23 June 2014

    - Add ability to change the S-Finder icon to AnyApp for Air Command Icon. (Not all themes are supported due to the way the icons are drawn for some themes)
    - Minor changes to installer codes for future developments.


    VERSION v2.1.0
    Date released: 20 June 2014

    - Metalic Pack added.
    - Glossy Pack added.
    - Miscellaneous Pack added.
    - Modded files now overwrites over existing files to lower risk of missing files.

    VERSION v2.0.0
    Date released: 17 June 2014

    - Rewrote all the scripts for more streamlined process. Now you get a main menu to directly access all the different themes instead of going through the pages to get to your desired themes.
    - Fixed bug of getting into unwanted bootloops caused by rebooting directly from aroma installer. Reboot function is now disabled. Users will now exit installer and manually reboot from recovery.
    - Additional cleaning included to clear any possible remains from previous install to prevent interference with install.
    - Covered Button Pack added.
    - Circle Plates Pack added.
    - More themes will be added soon.
    - Added some simple file checks at the end of process to ensure important files are located where they should be located.

    VERSION v1.0.0
    Date released: 15 June 2014

    - Cristal Pack added.
    - Leather Pack added.
    - Renamed to AM Air Command Themer.

    VERSION BETA
    Date released: 14 June 2014

    - 3 different transparency level for stock Air Command Theme.
    - Installer will now skip Back Up and creating of Emergency Reset flash zip if Restore is selected.
    - First public release.

    VERSION ALPHA
    Date released: 13 June 2014

    - Aroma Installer added.
    - Creates Emergency Reset flash zip using user's current framework-res.apk.
    - Auto checks for previously created Emergency Reset flash zip and skips creation if found.
    - Provides back up for framework-res.apk.
    - Auto checks for previously backed up framework-res.apk and skips back up if found.
    - Uses injection method to mod user's framework-res.apk.
    - If backup not found, restore to original is done by injection method.
    - Changelog added.
    - Unreleased to public.