FORUMS

How To Port Fully Featured Sony Xperia Z4 Camera

Xperia Z4’s hardware may not impress, but its software is definitely … more

Experimental TWRP Available For Moto G 2015

XDA Senior Member squid2 has posted experimental builds of TWRP for the Moto G … more

Sunday Debate: How Can We Get a No-Compromise Phone?

Join us in a fun Sunday Debate on Compromises. Come with your opinions and … more

PSA: You Can Optimize Your Note 4’s Recents Menu & RAM

The Note 4 never had the fastest Recents Menu, and despite its 3GB of RAM, … more

[TOOL] Moto E Firmware Restore and or Relock bootloader also unroot

2,292 posts
Thanks Meter: 2,293
 
Post Reply Subscribe to Thread Email Thread
21st June 2014, 07:27 AM |#11  
Member
Flag Mumbai
Thanks Meter: 5
 
More
where is the batch file and does it work for XT1022
 
 
25th June 2014, 08:21 AM |#12  
Member
Dandeli
Thanks Meter: 127
 
More
yup you can!!
Quote:
Originally Posted by priyank.g

I want to ask if this would work if i only want to remove the 'warning unlocked bootloader' logo on XT1022 ?

yup u can flash logo.bin and restore your stock motorola logo instead of warning boot loader unlocked...

use the file attached and flash it using fastboot...

put your phone in boot loader mod and connect it to pc

paste the attached file in fastboot folder

open fastboot and flash using below command

Code:
fastboot flash logo logo.bin
If It Worked Dont Forget To Press Thanks Button

Download Link

Logo.bin : http://www4.zippyshare.com/v/49199314/file.html
The Following User Says Thank You to iblaziner786 For This Useful Post: [ View ]
25th June 2014, 08:24 AM |#13  
Deadly's Avatar
Recognized Contributor
Flag Bangalore
Thanks Meter: 3,996
 
Donate to Me
More
Quote:
Originally Posted by iblaziner786

yup u can flash logo.bin and restore your stock motorola logo instead of warning boot loader unlocked...

use the file attached and flash it using fastboot...

put your phone in boot loader mod and connect it to pc

paste the attached file in fastboot folder

open fastboot and flash using below command

Code:
fastboot flash logo logo.bin
If It Worked Dont Forget To Press Thanks Button

Download Link

Logo.bin : http://www4.zippyshare.com/v/49199314/file.html


well it was already there from weeks http://forum.xda-developers.com/show...25&postcount=2
The Following 2 Users Say Thank You to Deadly For This Useful Post: [ View ]
3rd September 2014, 02:41 PM |#14  
EMINEM786's Avatar
Senior Member
Flag Lcom/eminem786/warlock/MainActivity.smali
Thanks Meter: 170
 
Donate to Me
More
reserved

---------- Post added at 01:41 PM ---------- Previous post was at 01:40 PM ----------

reserved 2
11th November 2014, 10:39 PM |#15  
noRetail's Avatar
Senior Member
Flag São Paulo
Thanks Meter: 32
 
Donate to Me
More
[TOOL] Moto E Firmware Restore and or Relock bootloader also unroot
Where is bat files?
5th February 2015, 01:49 PM |#16  
shashanksetty's Avatar
Member
Flag mysore
Thanks Meter: 134
 
More
HTML Code:
[QUOTE=Tomsgt;53405510]Warning use these files at your own risk. I am not responsible for what you do to your devices

These are some Batch files that i made up to make it easy to unbrick, unroot, restore, relock, and remove the unlocked bootloader logo. 
Hope this helps some of you guys out. I am placing all the files you will need in the zips so that all you have to do is extract them to your desktop and run the batch file of your choosing. also make sure you run the motorola device manager program first to get the drivers installed that you need. 

you have to place your device in bootloader mode / fastboot mode to use these batch files.
1. turn off phone
2. hold both volume up and down
3. while holding up and down hold power for 5 seconds then release power.
4. now you should see bootloader menu this is fastboot mode.
5. plug in cable to your computer and run a batch file

Batch Files
Remove unlock bootloader logo
Restore & Relock Bootloader full wipe
Restore Firmware No Data Wipe
Normal Stock Firmware Restore

Note the Stock XML file is included if you want to use RSDLite to restore your device.

Android Version 4.4.2
To Find out what Firmware you need. Go to settings on your Moto E then scroll down to about phone and look at the info there.
[URL="http://rootjunkysdl.com/?device=Moto%20E%20XT1023&folder=Moto%20E%204.4.2%20Restore%20and%20Relock%20tools"]Check For Your Firmware Here[/URL]

If your Firmware isnt listed then please comment with your about phone info and i will see if i can add it.[/QUOTE]
Hello! does this tool support the Indian variant?
23rd July 2015, 11:52 AM |#17  
Member
Flag Pune
Thanks Meter: 7
 
More
Angry
Quote:
Originally Posted by Tomsgt

Warning use these files at your own risk. I am not responsible for what you do to your devices

These are some Batch files that i made up to make it easy to unbrick, unroot, restore, relock, and remove the unlocked bootloader logo.
Hope this helps some of you guys out. I am placing all the files you will need in the zips so that all you have to do is extract them to your desktop and run the batch file of your choosing. also make sure you run the motorola device manager program first to get the drivers installed that you need.

you have to place your device in bootloader mode / fastboot mode to use these batch files.
1. turn off phone
2. hold both volume up and down
3. while holding up and down hold power for 5 seconds then release power.
4. now you should see bootloader menu this is fastboot mode.
5. plug in cable to your computer and run a batch file

Batch Files
Remove unlock bootloader logo
Restore & Relock Bootloader full wipe
Restore Firmware No Data Wipe
Normal Stock Firmware Restore

Note the Stock XML file is included if you want to use RSDLite to restore your device.

Android Version 4.4.2
To Find out what Firmware you need. Go to settings on your Moto E then scroll down to about phone and look at the info there.
Check For Your Firmware Here

If your Firmware isnt listed then please comment with your about phone info and i will see if i can add it.

no download link for the batch files...how to relock my device?

---------- Post added at 11:52 AM ---------- Previous post was at 11:08 AM ----------

Quote:
Originally Posted by Tomsgt

No the device will say locked but will have a status code of 2 not 0 so they will still know it was unlocked

Does it mean now that i can update to stock 5.1 without bricking my device? Mail me at keepersmith6@gmail.com
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes