[GT-I9001][ROM][ION][JB-4.2.2][JDQ39E] CyanogenMod 10.1 by ADC-Team - Release 6 [EOL]
- Thread starter DevConnection_Team
- Start date
That wouldn't solve much since I need my Wifi On. But I'm curious nobody mentioned this problem before, or is it just me? I did reinstall it twice already hoping it's a bad install or something.
Airplane mode ON , toogle wifi switch ON , the phone is still în airplane mode ON (it will not search for signal anymore)->DeepSleep OK
¿Why not?
Update this rom one last time, to make it compatible with new partition system, kernel 3.17...
Update this rom one last time, to make it compatible with new partition system, kernel 3.17...
Unfortunately this ROM has big problems with GPS (accuracy with device only 70m with slimkat 4m) , otherwise I like it very much, it starts a lot faster than slimkat. How can I go back to the earlier filesystem?
I flashed twrp_2.8.0.0_ariesve_20140912-signed and then slim-ariesve-4.4.4.build.6.7-unofficial-20140722-1224 with pa_gapps-modular-pico-4.4.4-20141110-signed, later update-supersu-v1.99. All partitions have been wiped, except the external sdcard.
I:Creating Android Secure: /sdcard/.android_secure
mount: mounting /sdcard/.android_secure on /and-sec failed: No such file or directory
I:mount '/sdcard/.android_secure' '/and-sec' process ended with ERROR=255
This is the log of the Slimkat-installation:
I flashed twrp_2.8.0.0_ariesve_20140912-signed and then slim-ariesve-4.4.4.build.6.7-unofficial-20140722-1224 with pa_gapps-modular-pico-4.4.4-20141110-signed, later update-supersu-v1.99. All partitions have been wiped, except the external sdcard.
I:Creating Android Secure: /sdcard/.android_secure
mount: mounting /sdcard/.android_secure on /and-sec failed: No such file or directory
I:mount '/sdcard/.android_secure' '/and-sec' process ended with ERROR=255
This is the log of the Slimkat-installation:
Code:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting TWRP 2.8.0.0 on Fri Jul 24 09:21:29 2015
I:=> product model: 'GT-I9001'
I:=> using device id: 'GT-I9001'
I:Internal path defined: '/sdcard'
I:External path defined: '/external_sd'
TW_NO_REBOOT_BOOTLOADER := true
TW_POWER_BUTTON := 107
I:Lun file '/sys/devices/platform/msm_hsusb/gadget/lun0/file'
TW_HAS_DOWNLOAD_MODE := true
I:TW_BRIGHTNESS_PATH := /sys/devices/platform/msm_fb.196609/leds/lcd-backlight/brightness
I:Found brightness file at '/sys/devices/platform/msm_fb.196609/leds/lcd-backlight/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
Starting the UI...Pixel format: 480x800 @ 32bpp
Pixel format: RGBX_8888
Not using qualcomm overlay, 'msmfb40_30001'
framebuffer: fd 4 (480 x 800)
TW_SCREEN_BLANK_ON_BOOT := true
=> Linking mtab
Renaming regular /etc/recovery.fstab -> /etc/recovery.fstab.bak
Moving /etc/twrp.fstab -> /etc/recovery.fstab
=> Processing recovery.fstab
I:Processing '/boot'
I:Processing '/recovery'
I:Processing '/system'
I:Processing '/cache'
I:Processing '/data'
I:Processing '/sdcard'
I:Processing '/external_sd'
I:Created '/and-sec' folder.
I:Creating Android Secure: /sdcard/.android_secure
mount: mounting /sdcard/.android_secure on /and-sec failed: No such file or directory
I:mount '/sdcard/.android_secure' '/and-sec' process ended with ERROR=255
I:Recreating and-sec folder.
I:mount '/sdcard/.android_secure' '/and-sec' process ended with RC=0
I:Backup folder set to '/sdcard/TWRP/BACKUPS/GT-I9001'
I:Settings storage is '/sdcard'
Updating partition details...
I:Unmounting main partitions...
Partition Logs:
/boot | /dev/block/mmcblk0p8 | Size: 5MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mmcblk0p8
Display_Name: Boot
Storage_Name: boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/recovery | /dev/block/mmcblk0p13 | Size: 7MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mmcblk0p13
Display_Name: Recovery
Storage_Name: recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: emmc
Fstab_File_System: emmc
Backup_Method: dd
/system | /dev/block/mmcblk0p15 | Size: 511MB Used: 8MB Free: 503MB Backup Size: 8MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p15
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/cache | /dev/block/mmcblk0p16 | Size: 98MB Used: 4MB Free: 94MB Backup Size: 4MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mmcblk0p16
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/data | /dev/block/mmcblk0p17 | Size: 1358MB Used: 23MB Free: 1334MB Backup Size: 23MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Encrypt_Backup Use_Userdata_Encryption
Primary_Block_Device: /dev/block/mmcblk0p17
Length: -16384
Display_Name: Data
Storage_Name: Data
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/sdcard | /dev/block/mmcblk0p28 | Size: 4830MB Used: 86MB Free: 4744MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent Has_Android_Secure Is_Storage Is_Settings_Storage
Symlink_Path: /sdcard/.android_secure
Symlink_Mount_Point: /and-sec
Primary_Block_Device: /dev/block/mmcblk0p28
Display_Name: SDcard
Storage_Name: SDcard
Backup_Path: /and-sec
Backup_Name: and-sec
Backup_Display_Name: Android Secure
Storage_Path: /sdcard
Current_File_System: ext4
Fstab_File_System: vfat
Backup_Method: files
/external_sd | /dev/block/mmcblk1p1 | Size: 30528MB Used: 653MB Free: 29874MB Backup Size: 653MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage
Primary_Block_Device: /dev/block/mmcblk1p1
Alternate_Block_Device: /dev/block/mmcblk1
Display_Name: Micro SDcard
Storage_Name: Micro SDcard
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: Micro SDcard
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/sdcard/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:PageSet::CheckInclude loading filename: ''
I:Loading included resources...
I:Loading included variables...
I:Loading mouse cursor...
I:Loading included pages...
I:Loading page main
I:Loading page main2
I:Loading page install
I:Loading page flash_confirm
I:Loading page flash_zip
I:Loading page flash_done
I:Loading page clear_vars
I:Loading page confirm_action
I:Loading page action_page
I:Loading page singleaction_page
I:Loading page action_complete
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page wipe
I:Loading page advancedwipe
I:Loading page formatdata
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Loading page backup
I:Loading page backupname1
I:Loading page backupname2
I:Loading page backupencryption
I:Loading page backupencryption2
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Loading page restore
I:Unable to open '/sdcard/TWRP/BACKUPS/GT-I9001'
I:Loading page restore_read
I:Loading page restore_decrypt
I:Loading page try_restore_decrypt
I:Loading page restore_select
I:Loading page renamebackup
I:Loading page restore_run
I:Loading page selectstorage
I:Loading page mount
I:Loading page usb_mount
I:Loading page usb_umount
I:Loading page reboot
I:Loading page settings
I:Loading page timezone
I:Loading page screen
I:Loading page Vibrate
I:Loading page advanced
I:Loading page partsdcard
I:Loading page htcdumlock
I:Loading page lock
I:Loading page filemanagerlist
I:Loading page filemanageroptions
I:Loading page choosedestinationfolder
I:Loading page filemanagerrenamefile
I:Loading page filemanagerrenamefolder
I:Loading page filemanagerchmod
I:Loading page filemanagerconfirm
I:Loading page filemanageracction
I:Loading page decrypt
I:Loading page trydecrypt
I:Loading page terminalfolder
I:Loading page terminalcommand
I:Loading page sideload
I:Loading page installsu
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
SELinux contexts loaded from /file_contexts
Full SELinux support is present.
E:Cannot load volume /misc!
E:Cannot load volume /misc!
Startup Commands:
af.resampler.quality=4
ro.cm.device=ariesve
ro.cm.display.version=11-20140912-UNOFFICIAL-dev_connection_team-ariesve
ro.cm.version=11-20140912-UNOFFICIAL-dev_connection_team-ariesve
ro.cm.releasetype=UNOFFICIAL
ro.sf.lcd_density=240
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.cwm.enable_key_repeat=true
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.sys.fw.bg_apps_limit=16
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.boot.emmc=true
ro.boot.hardware=qcom
ro.emmc=0
ro.twrp.boot=1
ro.twrp.version=2.8.0.0
ro.vold.umsdirtyratio=20
ro.wifi.channels=
ro.allow.mock.location=0
ro.board.platform=msm7x30
ro.build.id=KTU84Q
ro.build.date=ven 12 set 2014, 16.50.48, CEST
ro.build.date.utc=0
ro.build.host=stefano-desktop
ro.build.tags=test-keys
ro.build.type=userdebug
ro.build.user=stefano
ro.build.display.id=cm_ariesve-userdebug 4.4.4 KTU84Q 1a1a8e9e3b test-keys
ro.build.product=ariesve
ro.build.selinux=1
ro.build.version.sdk=19
ro.build.version.release=4.4.4
ro.build.version.codename=REL
ro.build.version.incremental=1a1a8e9e3b
ro.build.description=GT-I9001-user 2.3.6 GINGERBREAD XXKQN release-keys
ro.build.fingerprint=samsung/GT-I9001/GT-I9001:2.3.6/GINGERBREAD/XXKQN:user/release-keys
ro.build.characteristics=default
ro.config.low_ram=true
ro.config.ringtone=Orion.ogg
ro.config.alarm_alert=Hassium.ogg
ro.config.max_starting_bg=8
ro.config.notification_sound=Argon.ogg
ro.secure=0
ro.zygote.disable_gl_preload=true
ro.carrier=unknown
ro.cmlegal.url=http://www.cyanogenmod.org/docs/privacy
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=cm_ariesve
ro.product.board=ariesve
ro.product.brand=Samsung
ro.product.model=GT-I9001
ro.product.device=ariesve
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=Samsung
ro.baseband=unknown
ro.bootmode=unknown
ro.hardware=qcom
ro.opengles.version=131072
ro.revision=0
ro.serialno=
ro.telephony.ril.v3=datacall,icccardstatus,facilitylock
ro.telephony.call_ring.multiple=0
ro.telephony.ril_class=SamsungRIL
ro.bootloader=unknown
ro.debuggable=1
ro.modversion=11-20140912-UNOFFICIAL-dev_connection_team-ariesve
ro.rommanager.developerid=cyanogenmod
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
lpa.decode=false
net.bt.name=Android
net.change=net.bt.name
sys.usb.config=adb
use.non-omx.mp3.decoder=true
init.svc.adbd=running
init.svc.vold=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.rmt_storage=running
rild.libargs=-d /dev/smd0
rild.libpath=/system/lib/libsec-ril.so
twrp.crash_counter=0
wifi.interface=wlan0
debug.sf.hw=1
debug.egl.hw=1
debug.mdpcomp.logs=0
dalvik.vm.heapsize=128m
dalvik.vm.lockprof.threshold=500
dalvik.vm.heapmaxfree=2m
dalvik.vm.heapminfree=512k
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.dexopt-data-only=1
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.25
persist.cne.feature=1
persist.cne.override.memlimit=1
persist.sys.dun.override=0
persist.sys.usb.config=mass_storage
persist.sys.vold.switchablepair=sdcard0,sdcard1
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.dalvik.multithread=false
persist.sys.root_access=1
persist.sys.recovery_update=false
persist.service.adb.enable=1
service.adb.root=1
keyguard.no_require_sim=true
Running boot script...
I:/sbin/postrecoveryboot.sh process ended with RC=0
Finished running boot script.
I:Copying file /cache/recovery/log to /cache/recovery/last_log
I:Attempt to load settings from settings file...
I:Settings file '/sdcard/TWRP/.twrps' not found.
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
__bionic_open_tzdata: couldn't find any tzdata when looking for CST6CDT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Enabling MTP during startup
I:Starting MTP
twrp mtpid: 101
twrp mtpid: 102
MTP Enabled
Starting MTP
created new mtpserver object
adding internal storage
MtpStorage id: 101 path: /sdcard
I:Switching packages (TWRP)
MtpStorage id: 102 path: /external_sd
I:Starting command line thread
MtpServer::run fd: 21
I:TWFunc::Set_Brightness: Setting brightness control to 5
I:TWFunc::Set_Brightness: Setting brightness control to 0
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Set page: 'wipe'
I:Set page: 'advancedwipe'
I:Set page: 'action_page'
I:wipe list 'DALVIK;/system;/cache;/data;/sdcard;/and-sec;'
I:wipe_path 'DALVIK'
Wiping Dalvik Cache Directories...
-- Dalvik Cache Directories Wipe Complete!
I:wipe_path '/system'
Formatting System using make_ext4fs function.
Creating filesystem with parameters:
Size: 545259520
Block size: 4096
Blocks per group: 32768
Inodes per group: 6656
Inode size: 256
Journal blocks: 2080
Label:
Blocks: 133120
Block groups: 5
Reserved block group size: 39
Created filesystem with 11/33280 inodes and 4296/133120 blocks
warning: wipe_block_device: Discard failed
I:wipe_path '/cache'
Formatting Cache using make_ext4fs function.
Creating filesystem with parameters:
Size: 104857600
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 25600
Block groups: 1
Reserved block group size: 7
Created filesystem with 11/6400 inodes and 1438/25600 blocks
warning: wipe_block_device: Discard failed
I:Recreating /cache/recovery folder.
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:wipe_path '/data'
Formatting Data using make_ext4fs function.
Creating filesystem with parameters:
Size: 1447018496
Block size: 4096
Blocks per group: 32768
Inodes per group: 8032
Inode size: 256
Journal blocks: 5519
Label:
Blocks: 353276
Block groups: 11
Reserved block group size: 87
Created filesystem with 11/88352 inodes and 11600/353276 blocks
warning: wipe_block_device: Discard failed
I:wipe_path '/sdcard'
I:Disabling MTP
Formatting SDcard using make_ext4fs function.
I:Cannot lookup security context for '/sdcard'
Creating filesystem with parameters:
Size: 5146411008
Block size: 4096
Blocks per group: 32768
Inodes per group: 8064
Inode size: 256
Journal blocks: 19632
Label:
Blocks: 1256448
Block groups: 39
Reserved block group size: 311
Created filesystem with 11/314496 inodes and 41873/1256448 blocks
warning: wipe_block_device: Discard failed
mount: mounting /sdcard/.android_secure on /and-sec failed: No such file or directory
I:mount '/sdcard/.android_secure' '/and-sec' process ended with ERROR=255
I:Starting MTP
twrp mtpid: 101
twrp mtpid: 102
I:wipe_path '/and-sec'
Wiping Android Secure
E:Error opening '/sdcard/.android_secure/'
Updating partition details...
I:Set page: 'action_complete'
Starting MTP
created new mtpserver object
adding internal storage
MtpStorage id: 101 path: /sdcard
MtpStorage id: 102 path: /external_sd
MtpServer::run fd: 21
I:Set page: 'clear_vars'
I:Set page: 'advancedwipe'
I:Set page: 'wipe'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/external_sd/i9001_install/slim-20140722/slim-ariesve-4.4.4.build.6.7-unofficial-20140722-1224.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip contains SELinux file_contexts file in its root. Extracting to /file_contexts
I:Legacy property environment initialized.
mount: failed to mount /dev/block/mmcblk0p15 at /system: Device or resource busy
minzip: Extracted 2 file(s)
about to run program [/tmp/backuptool.sh] with 2 args
grep: /system/build.prop: No such file or directory
Not running backup from incompatible version
Creating filesystem with parameters:
Size: 545259520
Block size: 4096
Blocks per group: 32768
Inodes per group: 6656
Inode size: 256
Journal blocks: 2080
Label:
Blocks: 133120
Block groups: 5
Reserved block group size: 39
Created filesystem with 11/33280 inodes and 4296/133120 blocks
warning: wipe_block_device: Discard failed
_____________________
/ www.slimroms.net|
/ |
/ ___________________|
/ / ___
/ / ___/ \
/ / / \___/____ ____
/ / | |___/ \_/ |
___________/ / | | | |
| / | | | | | |
| / | | | | | |
|_____________/ \___^___^___^___^___/
Format and Mount System, Mount Data...
mount: failed to mount /dev/block/mmcblk0p17 at /data: Device or resource busy
minzip: Extracted 998 file(s)
minzip: Extracted 0 file(s)
Symlinks and permissions...
minzip: Extracted 2 file(s)
about to run program [/tmp/backuptool.sh] with 2 args
find: /tmp/addon.d/: No such file or directory
find: /tmp/addon.d/: No such file or directory
find: /tmp/addon.d/: No such file or directory
cp: can't stat '/tmp/addon.d/*': No such file or directory
Flashing Boot Image...
script succeeded: result was [/system]I:Legacy property environment disabled.
Updating partition details...
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'install'
I:Set page: 'flash_confirm'
I:Set page: 'flash_zip'
I:Set page: 'flash_zip'
Installing '/external_sd/i9001_install/slim-20140722/pa_gapps-modular-pico-4.4.4-20141110-signed.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
#########################################
___ _ ___ _
| _ \ /_\ / __| /_\ _ __ _ __ ___
| _// _ \ | (_ | / _ \ | '_ \| '_ \(_-<
|_| /_/ \_\ \___|/_/ \_\| .__/| .__//__/
|_| |_|
#########################################
PA GApps Pico Modular 4.4.4 - 20141110
about to run program [/sbin/busybox] with 3 args
Mounting system...
about to run program [/tmp/install-prep.sh] with 5 args
Android 4.4.x ROM detected
Installing GApps...
minzip: Extracted file "/system/addon.d/70-gapps.sh"
minzip: Extracted file "/system/app/ChromeBookmarksSyncAdapter.apk"
minzip: Extracted file "/system/app/GoogleCalendarSyncAdapter.apk"
minzip: Extracted file "/system/app/GoogleContactsSyncAdapter.apk"
minzip: Extracted file "/system/etc/g.prop"
minzip: Extracted file "/system/etc/permissions/com.google.android.ble.xml"
minzip: Extracted file "/system/etc/permissions/com.google.android.camera2.xml"
minzip: Extracted file "/system/etc/permissions/com.google.android.maps.xml"
minzip: Extracted file "/system/etc/permissions/com.google.android.media.effects.xml"
minzip: Extracted file "/system/etc/permissions/com.google.widevine.software.drm.xml"
minzip: Extracted file "/system/etc/permissions/features.xml"
minzip: Extracted file "/system/etc/preferred-apps/google.xml"
minzip: Extracted file "/system/framework/com.google.android.ble.jar"
minzip: Extracted file "/system/framework/com.google.android.camera2.jar"
minzip: Extracted file "/system/framework/com.google.android.maps.jar"
minzip: Extracted file "/system/framework/com.google.android.media.effects.jar"
minzip: Extracted file "/system/framework/com.google.widevine.software.drm.jar"
minzip: Extracted file "/system/lib/libAppDataSearch.so"
minzip: Extracted file "/system/lib/libWhisper.so"
minzip: Extracted file "/system/lib/libconscrypt_gmscore_jni.so"
minzip: Extracted file "/system/lib/libgames_rtmp_jni.so"
minzip: Extracted file "/system/lib/libgcastv2_base.so"
minzip: Extracted file "/system/lib/libgcastv2_support.so"
minzip: Extracted file "/system/lib/libgms-ocrclient.so"
minzip: Extracted file "/system/lib/libgmscore.so"
minzip: Extracted file "/system/lib/libjgcastservice.so"
minzip: Extracted file "/system/lib/libjni_latinime.so"
minzip: Extracted file "/system/priv-app/GoogleBackupTransport.apk"
minzip: Extracted file "/system/priv-app/GoogleFeedback.apk"
minzip: Extracted file "/system/priv-app/GoogleLoginService.apk"
minzip: Extracted file "/system/priv-app/GoogleOneTimeInitializer.apk"
minzip: Extracted file "/system/priv-app/GooglePartnerSetup.apk"
minzip: Extracted file "/system/priv-app/GoogleServicesFramework.apk"
minzip: Extracted file "/system/priv-app/Phonesky.apk"
minzip: Extracted file "/system/priv-app/PrebuiltGmsCore.apk"
minzip: Extracted file "/system/priv-app/SetupWizard.apk"
Fixing Permissions...
Unmounting system...
about to run program [/sbin/busybox] with 3 args
GApps Installation Complete!
script result was [3]
I:Legacy property environment disabled.
Updating partition details...
I:Set page: 'flash_done'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'mount'
I:Set page: 'main'
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Set page: 'advanced'
I:Set page: 'confirm_action'
I:Set page: 'action_page'
I:Copying file /tmp/recovery.log to /sdcard/recovery.log
Hello Guys, I need your help!!
I was curious in trying Lollipop on my S+ , but it run with lots of bugs. I don't know wtf I did with partitions, but I'm unable to go back and flash this 4.2.2 Rom. Can someone help me and check what you guys have as partitions?
I have:
- System: ext4
- cache: ext4
- data: ext4
I tried to reinstall twrp indicated as 20141221 and change Data as Fat, full wipe but when I install it say error. Another time it complete the install but in boot it crash and say "Process unsuccesfull" with a button "reset the phone".
I can only stay in 4.4.4 kk. I miss my JellyBean ;-(
I was curious in trying Lollipop on my S+ , but it run with lots of bugs. I don't know wtf I did with partitions, but I'm unable to go back and flash this 4.2.2 Rom. Can someone help me and check what you guys have as partitions?
I have:
- System: ext4
- cache: ext4
- data: ext4
I tried to reinstall twrp indicated as 20141221 and change Data as Fat, full wipe but when I install it say error. Another time it complete the install but in boot it crash and say "Process unsuccesfull" with a button "reset the phone".
I can only stay in 4.4.4 kk. I miss my JellyBean ;-(
I did nothing about JB backup unfortunatelly...I thought to had, instead I have it just of a 4.4.4.
Can you check, if u have a minute, on your recovery setting? thanks a ton!
try original rom with oddin
Please try original rom with oddin then install recovery and then whichever rom you want. oddin should rectify your partitions.
Please try original rom with oddin then install recovery and then whichever rom you want. oddin should rectify your partitions.
Well, I installed with Odin a 2.3.6 Jb and it was really funny to see how "it was"..
but the firmware has some bugs with network and google apps. Anyway I flashed Root.zip --> reboot --> all wipes --> flashed twrp recovery --> reboot recovery --> tried to install this Rom..but it fails again. Than, to use my phone, I changed Data as ext4 and restored my backup 4.4.4. All works, network too.
Really don't know grrrr...
Edit:
Well, when I try to install Jb, in the rows after md5 check it say: "symlink: some symlink failed" then it say error... any idea?
Can someone that use TWRP as recovery check how are partition structured?? thanks to all of u guys!
Last edited:
TV-out only works with the stock 2.3.x roms, it's a proprietary feature from Samsung which was never part of Android/AOSP or CM.
Thank you. .. Rom has a TV-out and USB OTG?
Trimis de pe al meu SM-T800 folosind Tapatalk
Not sure about OTG support in the stock Gingerbread ROM but TV-out works, but like I said in my previous post TV-OUT support is NOT present in any CyanogenMod version.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
127
Hi everyone,
We are proud to present our build of CyanogenMod 10.1 hybrid ION/PMEM_ADSP for the Galaxy S Plus (GT-I9001).
Currently the team is composed by the following members (in alphabethic order):
[Dev] CastagnaIT, Christopher83, Educk, Ivendor, Krislibaeer
[Tester] smeroni68, ktulu84, Xellar, Rhonin86
Rom informations:
The conversion to ION Memory Allocator has been provided by our devs, and thanks to Christopher83 we finally integrate the camera/video capturing functionality by enabling the pmem adsp heap allocation just for camera lib interface (libs are still the old version). All the rest of the allocation is provided via ION heaps. This version is not a full ion, but is a 99% ION and 1% PMEM.
What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
BLNv10
USB/Wifi tethering
VSync
USB OTG (Full FAT, FAT32, NTFS support) (check HERE the cables needed)
MicroSD exFAT support (Tested on Samsung 64GB SDXC uhs1 PRO card)
Phantom key presses filtering
Screenshots
CM10.1Install Guide
Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Download CM10.1 and gapps-jb zips and put them in /sdcard
ATTENTION: The new dynamic allocation through CMA of ION Heap (to free more ram and dynamically allocate ram when needed from MM features) requires to AVOID the memory management with KSM... if you activate the KSM option, after some time the allocation fail so the 720P recording and playback will be broken!! In this case disable the KSM option inside "Settings -> Performance -> Memory Management" and reboot the phone to fix!!
- 20141117 ION Release 6: (DL from DevHost) - (DL from MediaFire)
MD5SUM: dd57eea0517639fa9cc6de4c5fc75bf3
- Synched with CM sources
- Enabled legacy sensor fusion (credits to CastagnaIT)
- init.qcom.rc: removed permission for jack control (credits to CastagnaIT)
- init.qcom.rc: correct the addresses of the sensors (credits to CastagnaIT)
- AriesParts: Fix horizontal calibration (credits to Christopher83)
- AriesParts: Add shortcut for launcher app drawer (credits to erik96)
- BoardConfig: updated TWRP settings (credits to CastagnaIT)
- ueventd: added some missing audio permissions and cleanup (credits to CastagnaIT)
- ueventd.qcom.rc: Removed deprecated pmem defines (credits to sirmordred)
- Initial support for the hardware tunables framework (credits to Balint Czobor)
- Add hardware MP3 decoder (credits to arco68)
- ariesve: added hardware abstraction framework (credits to CastagnaIT)
Various stuff ported from CM 10.2 and CM 11.0 by CastagnaIT - Updated fonts
- Allow to turn off battery status on lockscreen
- Some new Italian language translations
- Double tap to sleep (status bar and lockscreen)
- Allow changing screen-off animation between fade & crt effects
- Quicksettings tiles and Ribbon from cm-10.2 / cm-11.0
- Reorganized menus (audio/display/system etc...)
- Volume buttons orientation by screen rotation
- Added "Add tile" button inside the status bar
- Added "Backlight settings menu" tile
- Added "Fast Charge" tile
- Added "Compass" tile
- Added "Show smaller tiles" option
- Various bugfixes
- 20140711 Kernel: (DL from DevHost) - (DL from MediaFire)
MD5SUM: 7cb25e45f80dcd6afdb85ac21a934c52
ATTENTION: This kernel is included in the rom... this download is in case of custom kernel installed and want to come back to stock!
- Kernel 3.4.104
- defconfig: Disable KSM (credits to arco68)
- cpufreq: Persist cpufreq time in state data across hotplug (credits to Ruchi Kandoi)
- prctl: adds the capable(CAP_SYS_NICE) check to PR_SET_TIMERSLACK_PID. (credits to Ruchi Kandoi)
- net: wireless: Increase scan entry expiration to fit new scan time (credits to Dmitry Shmidt)
- DMA: PL330: Fix racy mutex unlock (credits to Javi Merino)
- cpufreq: fix sleeping in atomic context when realloc freq_table for all_time_in_state (credits to Minsung Kim)
- s3c2410_wdt: Add locking to cpu frequency transition notifier (credits to Mark Salyzyn)
- net: core: Support UID-based routing. (credits to Lorenzo Colitti)
- Handle 'sk' being NULL in UID-based routing. (credits to Sreeram Ramachandran)
- rtc: alarm: Squashed revert of power-on alarm feature and related commits (credits to Christopher83)
- binder: search for receiving context pid in global namespace (credits to Ricardo Mendoza)
- staging: binder: add vm_fault handler (credits to Vinayak Menon)
- Staging: android: binder: More offset validation. (credits to Arve Hjønnevåg)
- usb: gadget: f_accessory: Enabled Zero Length Packet (ZLP) for acc_write (credits to Anson Jacob)
- cgroup: Take css_set_lock from cgroup_css_sets_empty() (credits to Hans de Goede)
- cgroup: Fix use after free of cgrp (cgrp->css_sets) (credits to Hans de Goede)
- Revert "s3c2410_wdt: Add locking to cpu frequency transition notifier" (credits to Mark Salyzyn)
- usb: gadget: f_audio_source: Fixed USB Audio Class Interface Descriptor (credits to Anson Jacob)
- net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol() (credits to Avijit Kanti Das)
- sec_jack: updated driver (credits to CastagnaIT)
- Removed bcmdhd driver (credits to CastagnaIT)
- net: wireless: bcmdhd: bring bcmdhd version 1.28-27 (credits to CastagnaIT)
- net: wireless: bcmdhd: Fix SUPPORT_PM2_ONLY option for p2p (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.4 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.6 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.7 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Fix WEP-104 authentication (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.10 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Prevent recursive call of cfg80211_sched_scan_stopped() (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Enable full scan on PNO event (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.11 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.16 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Close p2p0 device in wl_down (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.21 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Fix tdls processing from cfg80211 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.27 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Fix NDO functionality (credits to ECCO PARK)
- net: wireless: bcmdhd: Enable p2p support bits for p2p device (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Remove PASS_ARP_PACKET define (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Remove chatty message from wl_cfgp2p_act_frm_search (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.41 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.42 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Update to version 1.88.45 (credits to Ecco Park)
- net: wireless: bcmdhd: enable WL_IFACE_COMB_NUM_CHANNELS (credits to Ecco Park)
- net: wireless: bcmdhd: Update Location Service code (credits to Ecco Park)
- net: wireless: bcmdhd: Fix of Wireless Location Service (credits to Ecco Park)
- net: wireless: bcmdhd: Fix of Wireless Location Service (credits to Ecco Park)
- net: wireless: bcmdhd: new feature for Roaming. (credits to Ecco Park)
- net: wireless: bcmdhd: Fixed Coverity issue. (credits to Ecco Park)
- net: wireless: bcmdhd: fix for negative padding (credits to Ecco Park)
- net: wireless: bcmdhd: Fixed Wi-Fi Location Service issues. (credits to Ecco Park)
- net: wireless: bcmdhd: add code for WLS service. (credits to Ecco Park)
- net: wireless: bcmdhd: Fix country checking (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: fixed power consumption issue of P2P. (credits to Ecco Park)
- net: wireless: bcmdhd: Fixed a problem of buganizer issue (11190960) (credits to Ecco Park)
- net: wireless: bcmdhd: reduced the wakelock time of RX packet (credits to Ecco Park)
- net: wireless: bcmdhd: cancel current PNO if connection will happen (credits to Ecco Park)
- net: wireless: bcmdhd: Change DTIM skip policy in suspend (credits to Ecco Park)
- net: wireless: bcmdhd: Set MAX_DTIM_ALLOWED_INTERVAL to 600 (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Enable IPv6 RA filter feature (credits to Ecco Park)
- net: wireless: bcmdhd: enable TDLS_auto_mode (credits to Ecco Park)
- net: wireless: bcmdhd: Sync with N5 branch (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Change the parameter for TDLS (credits to Ecco Park)
- net: wireless: bcmdhd: support Hotspot 2.0 release 1.0 (credits to Ecco Park)
- net: wireless: bcmdhd: Add WIPHY_WOWLAN_ANY support (credits to Dmitry Shmidt)
- net: wireless: bcmdhd: Add support for hidden ssid PNO scan (credits to Ashwin)
- net: wireless: bcmdhd: added samsung specific code (credits to CastagnaIT)
- net: wireless: bcmdhd: readded samsung MCAST_LIST_ACCUMULATION code updated from jf (credits to CastagnaIT)
- drivers: usb: Use Android device as USB keyboard/mouse (credits to Pranav Vashi)
- touchscreen: ancora: Update touchscreen API (credits to sirmordred)
- touchscreen: ancora: Add missing BTN_TOUCH (credits to arco68)
- mmc: msm_sdcc: Remove unnecessary delay in interrupt context (credits to Venkat Gopalakrishnan)
- USB: msm_otg: Fix host mode suspend bug (credits to Sujeet Kumar)
- USB: msm_otg: Fix a bug in charger detection procedure (credits to Pavankumar Kondeti)
- defconfig: ancora: Set ROW scheduler as default (credits to arco68)
- n_tty: Fix n_tty_write crash when echoing in raw mode (credits to Peter Hurley)
- msm_bam_rmnet: Fix potential memory corruption (credits to Subash Abhinov Kasiviswanathan)
- fs: exFAT: Update to v1.2.7 (credits to arco68)
- fs: exFAT: Update to v1.2.9 (credits to arco68)
- msm7x30: Update defconfigs (credits to CastagnaIT)
- msm: qdsp5v2: Convert all audio devices to ION. (credits to Blefish)
- msm: qdsp5v2: Minor code sync. (credits to Blefish)
- devices-msm7x30: #ifdef around msm_nand device (credits to arco68)
- board-ancora: Minor updates and changes (credits to arco68)
- defconfigs: Set ROW scheduler as default for ariesve, ancora_tmo and apache too (credits to Christopher83)
- qdsp5v2: Fix a null pointer dereference. (credits to Blefish)
- Revert "Staging: android: binder: More offset validation." (credits to arco68)
- msm: vidc: cache-flush encoder output buffers after alloc (credits to Praveen Chavan)
- seq_file: remove "%n" usage from seq_file users (credits to Tetsuo Handa)
- seq_file: introduce seq_setwidth() and seq_pad() (credits to Tetsuo Handa)
- vsprintf: ignore %n again (credits to Kees Cook)
- target/rd: Refactor rd_build_device_space + rd_release_device_space (credits to Nicholas Bellinger)
- board-ancora_tmo: Minor updates and changes (credits to doadin)
- block: row: Remove warning massage from add_request (credits to Tatyana Brokhman)
- Revert "Revert "mmc: core: remove the polling for BKOPS completion"" (credits to arco68)
- mmc: print an error on FLUSH timeout (credits to Maya Erez)
- mmc: block: flush request requeue after timeout. (credits to Maya Erez)
- mmc: core: increase timeout for disable cache operation (credits to Maya Erez)
- mmc: core: do not reinsert prepeared FUA and FLUSH requests in stop flow (credits to Konstantin Dorfman)
- mmc: queue: do not clean current request when urgent in progress (credits to Konstantin Dorfman)
- mmc: core: fix block request queue hang during data crc errors (credits to Sujit Reddy Thumma)
- mmc: core: continue to wait, when unblocked by signal (credits to Konstantin Dorfman)
- msm7x30: Revert SDC channels to upstream (credits to arco68)
- msm7x30: samsung: Remove PMIC_GPIO_SD_DET (credits to arco68)
- msm7x30: samsung: Disable sdc2_cfg_data (credits to arco68)
- msm7x30: samsung: Switch rest of boards to use msm_gpios_disable_free (credits to arco68)
- defconfig: Enable CONFIG_PM_RUNTIME (credits to arco68)
- fsa9480: corrected charging through USB 3.0 port also removed trailing spaces and some cleanups (credits to CastagnaIT)
- fm_si4709: samsung jb updates *GT-I9100 sources (credits to CastagnaIT)
- ARM: 7493/1: use generic unaligned.h (credits to Rob Herring)
- msm: camera: Replace idle wakelocks with pm_qos (credits to arco68)
- touchscreen: ancora: Add INPUT_PROP_DIRECT flag (credits to sirmordred)
- msm: kgsl: Remove all reference to CONFIG_ANDROID_PMEM (credits to Laura Abbott)
- msm: Remove all references to CONFIG_ANDROID_PMEM (credits to Laura Abbott)
- msm: Remove PMEM dependency for MSM7KV2_AUDIO (credits to mikeioannina)
- power: apache_battery: Remove trailing spaces (credits to Christopher83)
- power: ancora_tmo_battery: Remove trailing spaces (credits to Christopher83)
- power: ancora_battery: Remove trailing spaces (credits to Christopher83)
- Revert "freezer: shorten freezer sleep time using exponential backoff" (credits to arco68)
- 20130812 GApps (DL from Goo.im) (DL from androidfilehost)
MD5SUM: 5f22f046e37038a3856eeb825e73d4ed
NOTE: Remember to wipe Cache and Dalvik cache from recovery after gapps flash!!
Please verify the md5sum to be sure you got the right one.
Previous versions:
Before you install CM10.1: Preparation (First three are optional. If you want to start fresh, these can be skipped)
- Install AppBak from Market, run it and save a list of all your apps.
- Install SMS Backup and Restore from Market, run it and backup your SMS history.
- Install Call Logs Backup and Restore from Market, run it and backup your call log history.
- Boot into recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.
WARNING: Many apps will Force Close crash if you restore data from a previous ROM.
Install
- Here you can find the CWM Recovery and TWRP built by our Team:
WARNING: YOU MUST USE ONE OF THE RECOVERY OF THE TEAM... IT'S NOT AN OPTIONAL CHOICE!!!
CWM & TWRP Thread
WARNING: We built and tested these recoveries, but always remember that we are not responsible for any damage by using these software!!
They are based on safe kernel on emmc side!!
- Wipe data, cache and Dalvik cache
- Flash the rom file *.zip.
- Flash the gapps file *.zip. You must flash gapps after every upgrade to CM10.1 since /system is formatted, wiping your previous add-ons.
- Reboot phone.
- After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
WARNING: Do not restore backup data of system apps!
- If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
- It seems that restoring backups can also break Calendar sync.
Upgrades
Upgrades from previous versions of CM10.1 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM10.1 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.
NOTE: You can upgrade a previous installation PMEM with this ION/ADSP version.
NOTE: Please DO NOT USE OLDER CUSTOM KERNEL not updated for ION!!!
Credits and Thanks
CyanogenMod Team
arco68 for his huge work for our device
AriesVE Dev Connection Team
Nello96 for Team logo's
anakin174 for the team spare phone
Marco Z. for his donation
Sources
All our sources are on AriesVE-DevCon-TEAM GitHub
FAQ
- For recovery bootloop problem you should at this post
- BLNv10 feature recap:
- It is activable/deactivable from AriesParts (Advanced Settings) or BLN Control Application (Free or Pro version)
- No System Sounds UI:
- Download this app
- Set the system volume to maximum (7). You should hear the sounds again.
XDA:DevDB Information
[GT-I9001][JB 4.2.2] CyanogenMod 10.1 by ADC-Team - Kernel 3.4.x, ROM for the Samsung Galaxy S I9000
Contributors
DevConnection_Team, CastagnaIT, Christopher83, educk, ivendor, krislibaeer, ktulu84, Rhonin86, smeroni68, XeLLaR*
Source Code: https://github.com/AriesVE-DevCon-TEAM
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: Release 6
Stable Release Date: 2014-11-19
Created 2013-12-15
Last Updated 2015-05-2537F.A.Q. Section
F.A.Q - CyanogenMod 10.1
"The rom is stuck at splash screen, bootloop!"
-Use the NEWEST TWRP/CWM from US. Do not use any other recovery except the linked one in the thread!
"Will there be builds for the Galaxy W (same chipset)?"
-We dont know. When we finish the work on ION and have some free time, we will discuss about it.
"Gesture typing doesnt work?"
-AOSP Bug, please install Google Keyboard from the Playstore or as .apk. Also Swiftkey works correctly.
"Are 64GB Micro SD cards supported?"
-Yes, they are. Smeroni68 is using one in his phone, and it works very well. (Tested on native exFAT Samsung 64GB SDXC uhs1 PRO card)
"Can I upgrade directly from CM10.1 PMEM version to this ION/ADSP?"
YES. You can upgrade directly from previous PMEM version up to ION/ADSP. Just remember to flash ROM and GAPPS and then wipe cache and dalvik before reboot to system.
34MAGNETIC / ACCELERATION / ORIENTATION SENSORS CALIBRATION
Finally on CM10.1 build all sensors are working, but the changes done on magnetic/acceleration/orientation require a new double calibration.
CALIBRATION PROCEDURE:
1) Standard horizontal calibration through the CM advanced menu, by placing the phone over a flat and horizontal surface and pressing Calibrate touch button
2) Magnetic field calibration by following an 8 shape to be done as shown in this video: HOW TO CALIBRATE ELECTRONIC COMPASS
The calibration movement is a combined one over all axes, and will result in a residual magnetism removal (reset).
This calibration seems like a stupid game, but really this is the right way to recalibrate with a slow movement following the video shape; it is not important the direction to be used, just do once or more times until you get the calibration.
To know if the calibration has been done, you must know where is approximately the North and look with an app if the needle is pointing there; if yes, try rotating the phone of 90, 180, 270 and finally back to 360 degrees and look if the needle is pointing everytime to North during the rotation... If this easy test give positive results, your phone is calibrated!
Note1: After this procedure, the orientation and magnetic field sensors will give the correct values with all apps.
Note2: Our phone is known to have a native shift of some degrees respect to the North, but this is a hardware limitation due probably to the orientation of the chip welded on the board...
Note3: This procedure can be used also after a new flash of a compatible custom kernel in case of orientation not correct...
Enjoy!!34CyanogenMod 10.1 by ADC-Team - Release 4 (ION)
CyanogenMod 10.1 by ADC-Team - Release 4 (ION) on first post!!
ROM Changelog:
Code:- Synched with CM sources - AriesParts: Greek translation (credits to chrisg4) - AriesParts: Dutch translation (credits to Marshian) - AriesParts: Polish translation (credits to lexarks) - AriesParts: Chinese translation (credits to zxc123coke) - AriesParts: Hungarian translation (credits to shiftyHungary) - AriesParts: German translation (credits to Rhonin86) - CameraHAL: Some changes and cleanup for better readability (credits to Christopher83) - CameraHAL: Use the orientation provided by camera info (credits to Christopher83) - CameraHAL: Remove preview workaround for front camera (credits to Christopher83) - CameraHAL: Remove not used code and unuseful commented code (credits to Christopher83) - CameraHAL: Fix photo portrait rotation for front camera (credits to Christopher83)
Kernel Changelog:
Code:- Kernel 3.4.80 - misc: bln: Turn off touch-keys after the completion of a notification (credits to Christopher83) - msm: camera: Set correct mount angle for S5KA3DFX front camera (credits to Christopher83) - block: bfq: Squashed update from v6r2 to v7 (credits to arco68) - cpufreq: Fix policy getting stuck when user & kernel min/max don't overlap (credits to Saravana Kannan) - arm: if there's no handler we need to restore sigmask, syscall or no syscall (credits to Al Viro) - arm: new way of handling ERESTART_RESTARTBLOCK (credits to Al Viro) - driver core: fix possible missing of device probe (credits to Sagar Dharia) - mach-msm:bus_config:fix possible missing error check (credits to Swetha Chikkaboraiah) - diag: Reduce error message frequency (credits to Katish Paran) - Rotator getting stuck leading to fence timeout (credits to Justin Philip) - block: add a flag to identify PM request (credits to Lin Ming) - block: add runtime pm helpers (credits to Lin Ming) - block: implement runtime pm strategy (credits to Lin Ming) - blkpm: avoid sleep when holding queue lock (credits to Aaron Lu) - block: allow REQ_PM requests even when the device is suspended (credits to Sujit Reddy Thumma) - block: do not notify urgent request, when flush with data in flight (credits to Konstantin Dorfman) - Bluetooth: Replace sprintf with snprintf (credits to Juffin Alex Varghese) - msm_serial_hs: Discard Clock On/Off request after Port Close (credits to Dilip Kota) - block: bfq: Squashed update from v7 to v7r1 (credits to arco68) - cpufreq: interactive: fix compiling warnings (credits to Chih-Wei Huang) - cpufreq: interactive: Allow 1 ms error in above_hispeed_delay comparisons (credits to Rohit Gupta) - cpufreq: interactive: Reset floor_validate_time if busy at max for 100ms (credits to Rohit Gupta) - cpufreq: interactive: Add a sampling_down_factor for max frequencies (credits to Rohit Gupta) - cpufreq: interactive: Remove trace event from idle_start handler (credits to Rohit Gupta) - cpuidle: make a single register function for all (credits to Daniel Lezcano) - debug-pagealloc: Panic on pagealloc corruption (credits to Subbaraman Narayanamurthy) - ext4: speed up truncate/unlink by not using bforget() unless needed (credits to Andrey Sidorov) - jbd2: optimize jbd2_journal_force_commit (credits to mrg666) - mm: methods for teaching filesystems about PG_swapcache pages (credits to Mel Gorman) - ping: prevent NULL pointer dereference on write to msg_name (credits to Hannes Frederic Sowa) - SELinux: Fix kernel BUG on empty security contexts. (credits to Stephen Smalley) - sync: Fix a race condition between release_obj and print_obj (credits to Alistair Strachan) - tcp: add a sysctl to config the tcp_default_init_rwnd (credits to JP Abgrall) - uio: msm_shared: Add support for platform data (credits to Pratibhasagar V) - writeback: fix race that cause writeback hung (credits to Junxiao Bi) - crypto: Several updates and fixes to crypto drivers (credits to CAF Team) - msm: camera: Don't set a flip for S5KA3DFX front camera on Ariesve (credits to Christopher83) - mach-msm: Revised VIDC memory reservation to fix video re-encoding issues (credits to Christopher83)28CyanogenMod 10.1 by ADC-Team - Release 3 (ION)
CM10.1 ION Release 3 is ONLINE!!
Enjoy!!
ROM:
- Synched with CM sources
- overlay: config: Fix USB Tethering interface regex (credits to Christopher83)
- BoardConfig: Move up Bionic optimization option (credits to Christopher83)
- cm: Remove unsupported settings (credits to Christopher83)
- AriesParts: Remove non translatable values (credits to Christopher83)
- AriesParts: Revised code for Utils class (credits to Christopher83)
- AriesParts: Support for BLN settings (credits to Christopher83)
- AriesParts: Italian translation for BLN settings (credits to Christopher83)
KERNEL:
- Kernel 3.4.77
- msm: pm2: Setup memory for save/restore cpu registers early (credits to Christopher83)
- workqueue: Added null check and warning (credits to Srinivasarao P)
- cfg80211: discard regulatory hints from country IEs with undefined wiphy (credits to Mihir Shete)
- msm: msm_fb: Update panel info in case of resolution change. In case of resolution change, panel_info and mfd are updated with latest resolution. (credits to raghavendra ambadas)
- Revert "mm: make is_vmalloc_addr work properly." (credits to Shruthi Krishna)
- mm: make is_vmalloc_addr lockless (credits to Laura Abbott)
- android: lowmemorykiller: add lmk parameters tunning code. (credits to seungho1.park)
- android/lowmemorykiller: Account for total_swapcache_pages (credits to Liam Mark)
- defconfig: Disable CONFIG_ENABLE_VMALLOC_SAVING (credits to arco68)
- defconfig: Disable KGSL shadow writes (credits to arco68)
- ARM: kconfig: select HAVE_EFFICIENT_UNALIGNED_ACCESS for CPUv6+ && MMU (credits to Will Deacon)
- Revert "staging: zram: Add auto loading of module if user opens /dev/zram." (credits to Greg Kroah-Hartman)
- Staging: zram: Fix access of NULL pointer (credits to Rashika Kheria)
- Staging: zram: Fix memory leak by refcount mismatch (credits to Rashika Kheria)
- usb: msm72k_otg: Update OTG status management (credits to Christopher83)
- usb: msm72k_otg: Allow USB bus overdraw for Legacy OTG (credits to Christopher83)
- msm: Qdsp5v2: audio: Migrate to ION. (credits to Kalyani Polepeddy)
- audio: msm: qdsp5v2: Switch hostPCM driver to ION. (credits to Kalyani Polepeddy)
- Initial commit for ION compilation errors (credits to Kalyani Polepeddy)
- msm: audio : Enable LPA (credits to Kalyani polepeddy)
- audio : Copyright correction. (credits to Kalyani polepeddy)
- msm: audio VOIP fixes. (credits to Kalyani polepeddy)
- msm: Remove all references to pmem from audio files (credits to Laura Abbott)
- qdsp5: memset stack buffer allocation. (credits to Asish Bhattacharya)
- exFAT: Update to v1.2.5 (credits to arco68)
- defconfig: Disable NTFS and build exFAT as built-in (credits to arco68)
- Revert lowmem and vmalloc patches (credits to arco68)
- sensors_ariesve: gp2a_proximity: Fix unbalanced enable for proximity IRQ (credits to Christopher83)
- misc: bln: New implementation and changes for BLNv10 (credits to Christopher83)
- Update defconfigs (credits to Christopher83)
About BLN
New features have been implemented and applied various changes to better manage existent features and provide additional in-kernel features:
- Add in-kernel management of notifications with static lights
- Possibility to set separate intervals for blink ON and OFF transitions
- Possibility to set or not set static lights after the timeout of blinking lights
- Better timeout management for in-kernel blinking lights
- Use a dedicated workqueue for scheduled works for blinking and static lights
- Turn the lights off after system resume if a notification is ongoing
- Remove duplicated calls to wakelock routines
- Free up the reserved space when the module is removed
- Some code cleanup, comments, copyright updates and other minor changes
You'll also have an updated AriesParts (Advanced Settings) where you can find the new implementations to control BLNv10 features, so you can avoid to use external apps (eg. BLN Control) and simply set your preferred backlight notification settings inside BLN tab of AriesParts.
You can find more details by looking at the related commit on device repo:
- 20141117 ION Release 6: (DL from DevHost) - (DL from MediaFire)
