LG G2 D80020c AT&T ONLY Kit-Kat Firmaware

5,060 posts
Thanks Meter: 10,782
By bigfau, Recognized Developer on 26th February 2014, 10:29 AM
Post Reply Subscribe to Thread Email Thread
6th June 2015, 06:17 PM |#151  
Really now's Avatar
Senior Member
Flag NW Indiana
Thanks Meter: 185
It seems to me that there is a different dll file needed when flashing from say a d802 ROM back to the d800. I don't remember what thread this came from though.
16th June 2015, 11:10 AM |#152  
Junior Member
Thanks Meter: 3
Originally Posted by SuperSport

D800 and D805? Thank you. If I get any further, I'll let you know what steps I've found work.

The unbrick tool links for D800 and D805-16GB and D805-32GB.
This tool works when the QHUSB issue occurs. Many posts suggest using a linux box to fix. But this tool works just fine with windows. And it even works when there's complete black screen i.e. no fastboot, no LG logo, no download mode.

And I was able to solve the cross-flash issue that I had with my phone using one of your own posts. I just had to use the DLL given by you in the LG flash tool. Thanks for that supersport.
The Following User Says Thank You to pallbearer911 For This Useful Post: [ View ]
7th August 2015, 02:53 PM |#153  
Junior Member
Thanks Meter: 0
Thumbs up Hey bro can you get me a link
Originally Posted by bigfau

Here is the D80020c 4.4 .tot and .dll for AT&T D800 ONLY. This will not retain root and will wipe all your data and internal sdcard. Make a back-up of your important items before preceeding.


Don't forget to hit the thanks button

***Quick Questioned Answered***
1.Can be flashed over D80010d and D80010o firmware
2.You will lose Root
4.You can use Lg Flash Tools to go back to 10d,10o.

1. LGFlashTools v1.5 - Download

2. Drivers - Download

3. Download the (Mirrior)
Extract to a folder on desktop. There will be 2 files(.tot, .dll)

Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2.
Credit to @hyelton for the original write up in the General section here.

1. Install the LG drivers downloaded above.

2. Install LGFlashTools v1.6 (but don't run it)

3. Extract the TOT and .DLL file from the ZIP

Drivers initialization:
1. Put the phone into download mode. (Turn off device PRESS VOL UP while plugging in the micro usb cable. If this doesn't work, try holding both volume keys instead)

2. Let the phone initialize and install the drivers. Once done, in Device manager, you should see the LG phone listed under COM ports (something along these lines).

3. Find that LG entry in Device Manager, click on Properties, Advanced and then change the COM port to COM41 and close/save.
4. Unplug your phone! Important step.

To get this tool to work, you'll need to do a few tricks.

1. Set the computer's date to some time in July 2012 or before.

2. Disconnect the internet

3. Find a serial number or register key from somewhere on the web (a google search for lgflashtools serial will yield some results). Can't help you here and please don't share any keys in this thread or get us in trouble.

4. Execute the LGFlashTools. It should ask you for a key, put it in. Now you should see a dialog where you can load the DLL file and the TOT files that you extracted earlier. Put them both in here. Click ok

5. There is a yellow arrow on the top left. Click on it to initialize the process. Once done, it should say "ready/finished" or whatever.

6. Put the phone in download mode again, and plug it into the USB port. LG FLash Tools should start flashing it automatically. When it's done, it'll automatically reboot into your stock AT&T rom and all of your data and internal sdcard files will be gone.

Don't forget to hit the thanks button

Hey bro this is not working could you give me another link
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes