FORUMS

Analysis & Opinion

Top Forum Discussions

[How-To] Moto G wireless charging (Universal Qi Receiver)

37 posts
Thanks Meter: 24
 
By Shadow_2k, Member on 3rd January 2014, 07:59 PM
Post Reply Subscribe to Thread Email Thread
5th July 2014, 02:03 PM |#61  
leyow's Avatar
Junior Member
Thanks Meter: 3
 
More
Quote:
Originally Posted by dubidu

It does get warm, but nothing to worry about. For me there is not much difference in temperature between the QI pad and a normal USB charger

OK, thanks for the info.

Sent from my XT1032
 
 
11th July 2014, 12:10 AM |#62  
SalvH's Avatar
Junior Member
Thanks Meter: 13
 
More
Anyone tried all this with the new 4G model? I assume it will work the same, right?
18th July 2014, 01:44 PM |#63  
Junior Member
Thanks Meter: 0
 
More
Got my charging pad and the film and assembled them via the micro USB port. However, my Moto G doesn't charge when the film is put inside the back cover. It works fine when I remove the charging film and put it directly on the charger.

I'm unable to make out which one is faulty. I initially thought the charging film is faulty, but it does exactly the same with my wife's Galaxy S4. Any advise folks ??
21st July 2014, 03:18 PM |#64  
Member
Thanks Meter: 11
 
More
Quote:
Originally Posted by eclairs48@gmail.com

Got my charging pad and the film and assembled them via the micro USB port. However, my Moto G doesn't charge when the film is put inside the back cover. It works fine when I remove the charging film and put it directly on the charger.

I'm unable to make out which one is faulty. I initially thought the charging film is faulty, but it does exactly the same with my wife's Galaxy S4. Any advise folks ??

You might be kinking the ribbon too much, or you bought the wrong plug type.

The pad has an "out face" it doesn't work on both sides.
26th July 2014, 06:04 AM |#65  
Junior Member
Thanks Meter: 0
 
More
Still not completely sold on this Wireless charging thing
26th August 2014, 06:44 AM |#66  
Senior Member
Thanks Meter: 84
 
More
Hello.
How much current does the phone get with these receivers (especially the ones with an output of 1A)?
2nd September 2014, 10:49 PM |#67  
Junior Member
Thanks Meter: 0
 
More
Just tried this with a moto g 4g and it works fine - subject to pinlock provisos yadda yadda.
Thanks to original poster: made an awesome cheap phone errr... awesomer ?
Ta
7th September 2014, 07:06 PM |#68  
Member
Thanks Meter: 31
 
More
For those asking how slowly it charges, I get 511mA for ~25% per hour charging time. The phone gets somewhat warm, around 95F on average. The peak temperature I've seen has been 105F.
2nd November 2014, 10:33 AM |#69  
Junior Member
Thanks Meter: 0
 
More
home made qi charger case
Hi guys, i have been a supporter of the whole qi idea ever since i got a lumia windows phone a while ago that had qi factory fitted. Unfortunately I hated windows phone operating system lol.

I decided to go back to android and after a 3 week nightmare with a Sony m2 that i eventually returned to the retailer after having had a row with Sony support and having 2 replacement handsets which both had different faults I ended up going for the moto g 4g.

I have to admit that my phone can suffer from abuse / hard life due to my job and being in / out of my pocket in dusty places so I always like to have a decent flip case to try protect the phone. The problem had was that when I put the micro usb receiver inside the back (stuck to the battery) my charger didnít detect it, i assume it was just too far away being inside the back and then shrouded by the flip case too. After a bit of disappointment and a few beers I decided to experiment and took a good sharp knife to the flip case, carefully cutting a receiver sized chunk out of the inside of case. it took a bit of time and care but I managed not to cut all the way through the case and just create a space for the receiver and thankfully i found it now works a treat . I donít often use the usb socket and never take the phone out of its flip case so this solution suits me very nicely and on the rare occasions i do need to use the usb its easy enough to get the qi usb plug out anyway. maybe this idea could help others who come across the same issue.

Ps kudos to Shadow_2k for discovering and pointing out that wireless charging only works with a lock screen, i didnít know at first and thought I had got a doggy qu receiver
21st August 2015, 03:36 PM |#70  
Senior Member
Thanks Meter: 21
 
More
Hmm, my charging speed is very low. According to Ampere, it's just around 100mA. And it takes really long time so that can be correct.

I have this sticker on my Moto G: http://www.aliexpress.com/snapshot/6...68084661942680

And this wireless charger: http://www.belkin.com/us/p/P-F8M741/

I just now tested with another wireless charger, LG WCP-300. It seems to work a little faster, according to Ampere a little faster. But, strangest thing, the battery jumped from 86% to 100% in just 10 minutes.

Problem with my sticker?
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes