FORUMS
Remove All Ads from XDA

Unofficial TWRP Padfone X

5,221 posts
Thanks Meter: 9,847
 
Post Reply Email Thread
1st May 2015, 04:00 AM |#41  
eyeoncomputers's Avatar
Member
Thanks Meter: 38
 
More
Quote:
Originally Posted by J-A-J-O

Hi

I'm trying to flash this recovery and still no luck, I used all of commands mentioned in this topic, but no luck. Copied recovery.img to the internal card and to the external one, and command still shows me "not found".

Does any body have a clue?

Also I'm not having any recovery right now...

follow this guide if you havent yet:
http://forum.xda-developers.com/show...&postcount=167
 
 
4th May 2015, 12:20 PM |#42  
Member
Thanks Meter: 2
 
More
Quote:
Originally Posted by eyeoncomputers

follow this guide if you havent yet:
http://forum.xda-developers.com/show...&postcount=167

Unfortunetly - when trying to push recovery to phone, command line shows me "not found". Checked with root explorer and it shows me that internal card is named /sdcard0/. Tried to change this in command line, but no luck. Can somebody tell me the command to push file from the computer directly?

Regards
Attached Thumbnails
Click image for larger version

Name:	recovery.png
Views:	282
Size:	56.6 KB
ID:	3295871  
4th May 2015, 12:37 PM |#43  
eyeoncomputers's Avatar
Member
Thanks Meter: 38
 
More
Quote:
Originally Posted by J-A-J-O

Unfortunetly - when trying to push recovery to phone, command line shows me "not found". Checked with root explorer and it shows me that internal card is named /sdcard0/. Tried to change this in command line, but no luck. Can somebody tell me the command to push file from the computer directly?

Regards

try to go to the step that says:
"(Installing CM12 through the bootloader and running CWM6 temporarily)"

You should be able to load CWM6 or CMrecovery with this method through the Bootloader
The Following User Says Thank You to eyeoncomputers For This Useful Post: [ View ] Gift eyeoncomputers Ad-Free
4th May 2015, 01:17 PM |#44  
Member
Thanks Meter: 2
 
More
Thanks! I've succesfully flashed TRWP throught the bootloader!
10th May 2015, 03:36 AM |#45  
eyeoncomputers's Avatar
Member
Thanks Meter: 38
 
More
Quote:
Originally Posted by J-A-J-O

Thanks! I've succesfully flashed TRWP throught the bootloader!

Quarx has released an official TWRP:
http://quarx2k.ru/asus_padfone_s/recovery/
The Following User Says Thank You to eyeoncomputers For This Useful Post: [ View ] Gift eyeoncomputers Ad-Free
11th July 2015, 10:35 PM |#46  
Senior Member
Flag Lviv, Ukraine
Thanks Meter: 306
 
More
del
1st December 2015, 04:42 PM |#47  
Junior Member
Thanks Meter: 1
 
More
Quote:
Originally Posted by AdamOutler

Introduction:
The padfone X was released last friday and I wanted TWRP. As you may know; @Dees_Troy is on vacation. So, I hacked together this "repack" version which should have all features in order. One caveat with this version though, when launching recovery after it's installed, the screen must time out (2-minutes) before you can push power and see it.


Warning:
Even though you may simply be using your device and just running apps, you are modifying your device. There is no 100% back to stock. You can find a fastboot flashable stock recovery here, but there is no stock system. While this mod did not trigger a "modified status" on my device, I cannot guarantee the same for you. This is a very new device and unless you're one of the few, brave and anxious, it may be in your best interest to wait until a stock firmware update, back-to-stock flash, or even an official XDA-Developers forum has been created for this device.


you will need:
1.The Unofficial TWRP recovery image
2.SuperSU installed on your device
3.TowelRoot installed on your device. You will need to enable third-party sources.
4.Terminal access (pick the one you're more comfortable with)
4a.ADB
4b.Terminal emulator


installation:
If you chose to use ADB, then use these ADB Instructions. Otherwise skip down to Terminal Emulator Instructions.

ADB Instructions

  1. Ensure you have installed SuperSU and TowelRoot.
  2. Launch the TowelRoot app, follow instructions, and let it reboot your device.
  3. navigate to the folder you downloaded ADB (and dll's if you're on windows) and execute the following command.
    Code:
    adb shell "curl 'https://builds.casual-dev.com/files/Asus/Padfone%20X/TWRP-Nexus5repack-AO1.img'>/sdcard/recovery.img; su -c 'dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery' bs=4096; sync; reboot recovery;"
  4. check your device for any pop-ups and grant root access to shell.
  5. wait 2 minutes after the screen is black, and then press power button. This is due to a difference between Nexus5 and PadfoneX which will be fixed in an official version later.

Terminal Emulator Instructions
  1. Ensure you have installed SuperSU and TowelRoot.
  2. Launch the TowelRoot app, follow instructions, and let it reboot your device.
  3. Launch Terminal Emulator and copy-pasta the following into it.
    Code:
    curl 'https://builds.casual-dev.com/files/Asus/Padfone%20X/TWRP-Nexus5repack-AO1.img'>/sdcard/TWRPrecovery.img; su -c 'dd if=/sdcard/TWRPrecovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery' bs=4096; sync; reboot recovery;
  4. check your device for any pop-ups and grant root access to shell.
  5. wait 2 minutes after the screen is black, and then press power button. This is due to a difference between Nexus5 and PadfoneX which will be fixed in an official version later.


Conclusion
Congratulations, you've got TWRP installed on your device. Now you can back up, restore, and install TWRP Flashable Zips. Please leave a comment and tell others how it worked. This worked great for me, Image below.




Gracias
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes