[MOD][GUIDE]Partition your internal SD for better App management 16GB & 32GB Models!

Which model do you own?

  • Total voters
    897
Search This thread
By:
Advanced…
H

Hazem Mahrous

New member
Mar 2, 2016
2
0
Thanx

I did every thing and insatalled the 8gb pit file but did not do the factory reset i only rebooted the device so ifound the internal sotrage decreased by 8gb but it did.nt increase in the apps storage so i used the orgianl stock pit file and it has been restored to it,s original size so what i did wrong and what should i do



Phone: Samsung Galaxy Note1

Android Version:4.1.2

Model Number:GT-N7000

Baseband Number:JPLSB
 
J

JerwinSayat

Senior Member
Feb 18, 2016
306
95
Hazem Mahrous said:
I did every thing and insatalled the 8gb pit file but did not do the factory reset i only rebooted the device so ifound the internal sotrage decreased by 8gb but it did.nt increase in the apps storage so i used the orgianl stock pit file and it has been restored to it,s original size so what i did wrong and what should i do



Phone: Samsung Galaxy Note1

Android Version:4.1.2

Model Number:GT-N7000

Baseband Number:JPLSB
Click to expand...
Click to collapse
In my humble opinion. You can try it again. Maybe odin fails? Maybe you dont format the "blank usb" thing?

Sent from my GT-N7000 using XDA-Developers mobile app
 
bauner

bauner

Retired Recognized Developer
Jan 23, 2008
4,726
10,333
Near Nürnberg
Hazem Mahrous said:
I did every thing and insatalled the 8gb pit file but did not do the factory reset i only rebooted the device so ifound the internal sotrage decreased by 8gb but it did.nt increase in the apps storage so i used the orgianl stock pit file and it has been restored to it,s original size so what i did wrong and what should i do



Phone: Samsung Galaxy Note1

Android Version:4.1.2

Model Number:GT-N7000

Baseband Number:JPLSB
Click to expand...
Click to collapse

You need to do the factory reset
 
  • Like
Reactions: JerwinSayat
H

hksaaa

Member
Jul 4, 2016
42
10
I have [Lollipop][Android 5.1.1] , do i have to flash rom again trought odin or ?Can someone explain me with more details or give me on youtube guide.And where do i check witch model do i have,16gb or 32gb.Thanks!
 
terius

terius

Senior Member
May 2, 2009
204
4
Ituzaingo
i did everything as explained in post 1 doing the 4gb. partition but when i go to setting/storage & USB tells me that the sdcard0 is damaged and i have to finish the configuration...than i have to format the sd card, when i do that tells me this : ¨command ´137 volume partition disk: 179_0 public` failed with´400 137 command failed¨
any idea?
I fixed it,.... i had to read a lot but i solved it, i just had to format the sdcard0 and sdcar1 in recovery...
 
Last edited:
F

freyjlord

Member
Sep 23, 2014
10
3
how long it takes for writing zImages like on screenshot ?
 

Attachments

  • asd.jpg
    asd.jpg
    149 KB · Views: 118
L

Lister Of Smeg

Senior Member
May 20, 2013
845
322
HP Touchpad
Samsung Galaxy Note GT-N7000
Hi All,

Forgive the noob-ish question, at work and looking in a hurry... I've got my Note (at home today) and I'm sure I partitioned it a while ago when I first tried Lollipop / Marshmallow... so believe I've done what I needed too. However what partitioning methods are available to us?

I can't remember what size the \System partition is before / after running these pits? Is it (always) over 768MB / 1GB, or do we have to increase it? As I believe these Pits are for the \Data partitions only isn't it....?

Basically my Note, which is still running KitKat at the moment. Now and then complains about running out of space (insufficient space)... So basically looking for a PIT FILE (if it should exist) that gives me like at least 1GB System, and 6GB Data.....? Does that existi???

Thanks, Lister
 
P

Prinus

Senior Member
Jul 29, 2015
286
309
Lister Of Smeg said:
Hi All,



Forgive the noob-ish question, at work and looking in a hurry... I've got my Note (at home today) and I'm sure I partitioned it a while ago when I first tried Lollipop / Marshmallow... so believe I've done what I needed too. However what partitioning methods are available to us?



I can't remember what size the \System partition is before / after running these pits? Is it (always) over 768MB / 1GB, or do we have to increase it? As I believe these Pits are for the \Data partitions only isn't it....?



Basically my Note, which is still running KitKat at the moment. Now and then complains about running out of space (insufficient space)... So basically looking for a PIT FILE (if it should exist) that gives me like at least 1GB System, and 6GB Data.....? Does that existi???



Thanks, Lister
Click to expand...
Click to collapse



Use the 2G system / 6G data pit, it works fine for LL and MM. I have been using this config for more than a year now without any space problems. Alternatively check the NightOwl threads for a repit methode by @Lanchon, it is a repit method without lossing data.


Sent from my lazy chair using Tapatalk
 
  • Like
Reactions: YLNdroid and Lanchon
Lanchon

Lanchon

Senior Member
Jun 19, 2011
2,753
4,487
Lister Of Smeg said:
Hi All,

Forgive the noob-ish question, at work and looking in a hurry... I've got my Note (at home today) and I'm sure I partitioned it a while ago when I first tried Lollipop / Marshmallow... so believe I've done what I needed too. However what partitioning methods are available to us?

I can't remember what size the \System partition is before / after running these pits? Is it (always) over 768MB / 1GB, or do we have to increase it? As I believe these Pits are for the \Data partitions only isn't it....?

Basically my Note, which is still running KitKat at the moment. Now and then complains about running out of space (insufficient space)... So basically looking for a PIT FILE (if it should exist) that gives me like at least 1GB System, and 6GB Data.....? Does that existi???

Thanks, Lister
Click to expand...
Click to collapse

forget about pit files, use my REPIT
 
  • Like
Reactions: YLNdroid, IronRoo, hewhomustnotbenamed and 1 other person
B

bambanx

New member
Jul 30, 2012
4
1
how i can know if my n7000 is 16 or 32model?

how i can know if my n7000 is 16 or 32model? thanks.
 
N

nithin1664

Member
Sep 8, 2016
21
1
how to repartition for n7000 running CM10

hi, i would like to repartition my n7000 16gb , its running CM10. is it okay if I flash just the .pit file and then install CM10 or CM11 again using CWM using zip file installation.

also i am not sure if CM10 uses preload or not.
could you explain the process for my n7000.

regards
Nithin
 
H

hksaaa

Member
Jul 4, 2016
42
10
nithin1664 said:
hi, i would like to repartition my n7000 16gb , its running CM10. is it okay if I flash just the .pit file and then install CM10 or CM11 again using CWM using zip file installation.

also i am not sure if CM10 uses preload or not.
could you explain the process for my n7000.

regards
Nithin
Click to expand...
Click to collapse

1st you flash this recovery http://xdaforums.com/devdb/project/dl/?id=18061 , then you https://www.androidfilehost.com/?fid=24499762635999029 install this trought this new installed recovery and then you need to install from /tmp again and it should work.
data=6gb (means +4gb for apps)
sdcard0=~7gb (means -4gb from the stock size)
 
You must log in or register to reply here.

Similar threads

U
[JB:CM10:HYBRID][GT-N7000] PARANOIDANDROID 2.57.6 [Utacka] [130422]
Replies
6K
Views
1M
A
awatdr
Phil3759
  • Poll
[PhilZ-cwm6][n7000] Stock Kernel+CWM6+Root+exFAT+NTFS-LTA
Replies
4K
Views
2M
nrmldgs
nrmldgs
joosh3
[ROM][4.1.2 JB]Ultimate N7000 LT4 JB 4.1.2 v6 |Solid~Smooth~Battery Friendly|15/05/13
Replies
5K
Views
1M
R
rumaro
g.lewarne
  • Locked
[KERNEL] [TW-AOKP-AOSP-CM9-CM10-PA-MIUI ] ~HydraCore v7~ Mali R3P0!
Replies
12K
Views
2M
Andy
Andy
eybee1970
  • Locked
[ROM] ROCKET ROM - v23 - GB - LC1 [Update 29/03] - JKay Mod 13.6.1 - MIUI Style Theme
Replies
10K
Views
2M
eybee1970
eybee1970

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 160
    metalgearhathaway
    metalgearhathaway
    [MOD][GUIDE]Partition your internal SD for better App management 16GB & 32GB Models!

    ***************************************************************************************************************
    UPDATE 19th July

    I have added my donation details to my profile, following a request from @A-S who wished to donate and request a build.

    I will always build for people, but he really wanted to donate so I set up the link!

    You may thank him for the new versions he requested if they suit you! 10gb & 12gb now available!



    32gb Model now supported! First tested and verified 6gb Data version attached, ask if you wish for different partition sizes! :) !



    Beware #1 - Preload moddified version are NOT suitable for Samsung Stock Roms!


    Beware #2 - Pre-Load moddified versions are for custom roms that do not use pre-load area! Please post on the respective thread for your rom and ask the author the question prior to using these versions if you are unsure! (I can tell you that SlimRoms & Cyanfox do not use preload, at present at least)


    Beware #3 - If you want to go back to stock rom, you just need to flash my standard edition pit files, easy!



    ***************************************************************************************************************



    Increase your data application partition and set your device free!



    Are you bored of having to move apps to SD?

    Bored of facing a stock issue of not even being able to move apps to your internal SD?

    This thread will help you, currently only for n7000 16gb Model only.    [/COLOR]




    GUIDE - The usual rules apply, You will:



    IMPORTANT: Please backup all your photos, videos and other important stuff on your PC, in the cloud or somewhere else where it is safe, as all your stuff on your internal SD card will be deleted!



    1) Run compatible version of Odin, put your phone in to download mode (vol down/home/power button) and connect to PC via USB





    2) Tick re-partition box


    3) Click PIT button and select the pit file of your desired app partition size.


    4a) Click PDA and select your stock official samsung jellybean rom - Edit- please remember if you use a rom that is not native to your region, it would be wise to flash the appropriate radio modem afterwards to ensure you get the signal strength you'd expect :)


    4b) OR Flash your persnonal choice of kernel in *.tar format and pit file, reboot to CWM ( power button/vol up/home button) and install new rom or restore nandroid and boot as normal and skip to number 9 in this guide


    5) Flash and wait for reboot


    6) Let the phone reboot and wait until the android chap finishes his spinny wire ball belly animation and then remove the battery and do a factory reset using the usual power/vol up/ home trick.


    7) Let it boot so you can check that you are happy with the result. ( I didn't, but you might want to)


    8) Now flash your chosen rooted kernel and either stick with stock rom or enter CWM and flash your own custom rom.


    9) When your phone boots, you may get a notification to format usb storage, say yes if prompted! If it that fails, connect you phone to your PC and format the the internal sd card manually.


    10) Remember that Android likes automatically deciding where apps go, so sometime it tries to put stuff to SD itself (app requests it), it is worthwhile checking your installed apps to makes sure they went to internal app partition, you can tell this by either:


    a) Look in Titanium back up, go to the move/integrate section and see if any apps show as moveable from SD to internal, if so run the batch process to put them on your nice new app partition, otherwise you may have issues running those apps.


    b) If you don't have Titanium (why not?) then check the harder way by looking at app manager and swipe to the right to look at SD app, sort by size and then individually move ones back to internal storage.


    11) That easy! Here is a shot of my resulting app manager





    Files attached to post including original pit in case you want it back to stock values!

    Enjoy!

    *****************************************************************

    Thanks to @RivakDebbie for testing this pit file on his own N7000 :good:
    View
    14
    metalgearhathaway
    metalgearhathaway
    OP UPDATED! NEW PITS ONLINE!



    New PIT's up! 4gb, 6gb and 8gb now supported. I have also created special versions freeing up 450mb from preload, this is added to the internal SD card partition.


    Please note - The preload modified version not suitable for Samsung Stock roms, it will work with many custom roms, but you need to check with the author of your custom rom first, as some do use preload, not many, but you are best to check first! I can tell you that Slim Roms and Cyanfox do not use preload.....


    Enjoy!
    View
    10
    metalgearhathaway
    metalgearhathaway
    AA1973 said:
    Welcome to the N7000 @metalgearhathaway
    Just as a matter of caution, an idea. Would you mind considering to add something like "please backup all your photos, videos and other important stuff on your PC, in the cloud or somewhere else where it is safe, as all your stuff on your internal SD card will be deleted!"
    Thanks again for your contribution ?

    Sent via GALAXY NOTE N7000 // KitKat
    Click to expand...
    Click to collapse
    Done, would thank you, but only 8 allowed, needs extending a little I reckon :good:
    View
    9
    metalgearhathaway
    metalgearhathaway
    How to make your own custom PIT File

    @TenzoNakami~ and all users wanting to continue this work for themselves and others :)

    It is really easy, you simply have to be able to use a calculator and make sure you don't make an error putting the numbers in!

    Download PitMagic from here: http://xdaforums.com/showthread.php?t=1916936


    You are warned, if you do not feel comfortable doing this, please do not even try! It is only basic mathematics and everyone has access to a calculator, so no excuses and no contacting me if you make horrible mistakes! I am not being cruel here, if you get it wrong, then it means that you did something wrong, plain and simple, so be careful, triple check your sums! Even sleep on it and check the next day to be sure after a good nights sleep :)



    How to make a custom PIT File


    To work out your new values the following applies:

    1) 1GB = 2,097,152 blocks (512mb is half that value etc.)


    2) The Block Size and Block Count of the previous section equals the value you enter for the next sections Block Size Value


    3) The Block Count is the amount of space you are allocating to that section


    4) The partitions you may want to work with are:

    a) FactoryFS - This is the system partition where your rom installs to

    b) DATAFS - This is the application partition where all your user installed apps will install to

    c) UMS - This is the partition that will be your internal SD card space, i.e. where you might place photos and music

    d) HIDDEN - This is the partition that some roms will use as preload, some roms use lots, some a little and some not at all!

    e) All other sections should remain untouched!


    5) You MUST make sure that your values all add up to the total available space available, that value is the Block Size & Block Count added together from the Hidden partition entry towards the bottom of the pit file!


    6) Take a look at the example below and you will now see that as you go down the partitions the block size and block count of a section equals the next sections block count value, everything adds up as you work down the list! By now you should be either understanding how this works, if you are not then my advice is go and do something fun instead and forget you read this :)


    EXAMPLE:

    This my n7000 pit file that has 2gb System (Factoryfs), 3gb data (DATAFS) and 512mb preload (HIDDEN) Ignore all that is shown in RED and only play with stuff coloured in GREEN!

    ----------------------------------------------------------
    PIT Magic v1.3.10 Copyright © Gaz 2012.
    ----------------------------------------------------------
    Analysis for: n7000 16gb variant - 2gb System - 3gb data - 512mb Preload.pit
    ----------------------------------------------------------


    ----------------------------------------------------------
    <<< Pit File Start >>>
    ----------------------------------------------------------


    ----------------------------------------------------------
    <<< PIT File Header Information >>>
    ----------------------------------------------------------

    Header Magic: 0x12349876 (4 Bytes)
    Entry Count: 15 (4 Bytes)

    ----------------------------------------------------------
    Dummy Data #1 (In String and Hexadecimal Format):
    ----------------------------------------------------------
    String:
    Hexadecimal: 00000000

    ----------------------------------------------------------
    Dummy Data #2 (In String and Hexadecimal Format):
    ----------------------------------------------------------
    String:
    Hexadecimal: 00000000

    ----------------------------------------------------------
    Dummy Data #3 (In String and Hexadecimal Format):
    ----------------------------------------------------------
    String:
    Hexadecimal: 00000000

    ----------------------------------------------------------
    Dummy Data #4 (In String and Hexadecimal Format):
    ----------------------------------------------------------
    String:
    Hexadecimal: 00000000

    ----------------------------------------------------------
    Dummy Data #5 (In String and Hexadecimal Format):
    ----------------------------------------------------------
    String:
    Hexadecimal: 00000000

    ----------------------------------------------------------
    Dummy Data Length: (4 Bytes Per Block, 20 Bytes In Total.)
    ----------------------------------------------------------

    Header Size: (28 Bytes)


    ----------------------------------------------------------
    <<< PIT File Entries >>>
    ----------------------------------------------------------


    ----------------------------------------------------------
    Entry Memory Address: 0x1C
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 0
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size:
    Block Count:
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: GANG
    Flash FileName: emmc.img
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0xA0
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 1
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size:
    Block Count:
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: BOOT
    Flash FileName: boot.bin
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x124
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 4
    Attribute: 1 (READ / WRITE)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 8,192
    Block Count: 40,960
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: EFS
    Flash FileName: efs.img
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x1A8
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 2
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 49,152
    Block Count: 2,560
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: SBL1
    Flash FileName: Sbl.bin
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x22C
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 3
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 53,248
    Block Count: 2,560
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: SBL2
    Flash FileName:
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x2B0
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 5
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 57,344
    Block Count: 16,384
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: PARAM
    Flash FileName: param.lfs
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x334
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 6
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 73,728
    Block Count: 16,384
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: KERNEL
    Flash FileName: zImage
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x3B8
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 7
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 90,112
    Block Count: 16,384
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: RECOVERY
    Flash FileName:
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x43C
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 8
    Attribute: 1 (READ / WRITE)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 106,496
    Block Count: 409,600
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: CACHE
    Flash FileName: cache.img
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x4C0
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 9
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 516,096
    Block Count: 32,768
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: MODEM
    Flash FileName: modem.bin
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x544
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 10
    Attribute: 1 (READ / WRITE)
    Update Attribute: 0 (UNKNOWN)
    Block Size: 548,864
    Block Count: 4,194,304
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: FACTORYFS
    Flash FileName: factoryfs.img
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x5C8
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 11
    Attribute: 1 (READ / WRITE)
    Update Attribute: 0 (UNKNOWN)
    Block Size:     4,743,168
    Block Count: 6,291,456
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: DATAFS
    Flash FileName: data.img
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x64C
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 12
    Attribute: 2 (STL)
    Update Attribute: 0 (UNKNOWN)
    Block Size:     11,034,624
    Block Count: 18,685,952
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: UMS
    Flash FileName: ums.rfs
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x6D0
    ----------------------------------------------------------

    Binary Type: 0 (UNKNOWN)
    Device Type: 2 (MMC)
    Identifier: 13
    Attribute: 1 (READ / WRITE)
    Update Attribute: 0 (UNKNOWN)
    Block Size:     29,720,576
    Block Count: 1,048,576
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name: HIDDEN
    Flash FileName: hidden.img
    FOTA FileName:


    ----------------------------------------------------------
    Entry Memory Address: 0x754
    ----------------------------------------------------------

    Binary Type: 1 (COM. PROCESSOR)
    Device Type: 1 (FILE / FAT)
    Identifier: 9
    Attribute: 0 (READ ONLY)
    Update Attribute: 0 (UNKNOWN)
    Block Size:
    Block Count:
    File Offset (Obsolete): 0
    File Size (Obsolete): 0
    Partition Name:
    Flash FileName:
    FOTA FileName:


    ----------------------------------------------------------
    <<< Pit File End >>>
    ----------------------------------------------------------

    Generated on: 02/03/2015 19:52:47



    Next,how to input your values


    1) First run pitmagic:




    2) Click the PIT File Analysis tab and open one of my pit files and export to file and this will export a text file to the root of your pitmagic directory, open the document and make amendments and your calculation in there and double check you make no mistakes, you can then refer to that to enter the details into the main pit file editor tab!


    3) Now that you have done that, on the pit file editor tab click open and select my pit file you are using as a base profile and then click save as and save it with a name of your own, now you are ready to start entering your values.


    4) Navigate to the PIT Entry List pull down box to select the PIT Entry list address field you are going to alter.


    5) Then enter the value for Block Size (which is the running total of memory allocated so far) and the Block Count (which is the value you are applying to the section.


    6) Click save after each amendment!


    7) Once you are done, go back to the pit file analysis tab and open you pit and export and check that the values were save correctly!


    8) If you are happy, now try using your newly created pit file! :)


    You are warned, if you do not feel comfortable doing this, please do not even try! It is only basic mathematics and everyone has access to a calculator, so no excuses and no contacting me if you make horrible mistakes! I am not being cruel here, if you get it wrong, then it means that you did something wrong, plain and simple, so be careful, triple check your sums! Even sleep on it and check the next day to be sure after a good nights sleep :)
    View
    9
    metalgearhathaway
    metalgearhathaway
    Special Lollipop Update as per user request!

    This file is untested (I own a LG G3) so use at your own risk!

    Requested details are:

    System - 2gb
    Data - 6gb
    Preload - 512mb

    Enjoy and please at least say thank you, I really had to think about this one, it has been a long time since I owned a device that used this structure! :)

    NB: This is the last Pit file I produce, it has been way more hassle than rewarding to provide this service for people. The information is out there on XDA on how to do this, so do not worry, if you want it enough it can be done! :) :highfive:
    View

New posts