Planning to take xda IIs apart.

[kelvin_27_84]

the pics in the zipped are corrupted..... its not even 4.5mb... something is wrong with the file pls upload the files again thank you so much... after looking at the bigger pics then i will be able to see if the LCD can be replace....

[bigblk150]

wertert,

Yes, zip file is only 1.5 KB... please repost.

When you took the device apart, did you notice where the WiFi antenna was and if it could possibly be relocated? A lot of people are complaining about the WiFi reception in the Blue Angel and, chances are, it's due to the antenna design/placement/location.

Thanks!

[Anonymous]

sorry about that.....I've tried uploading again but I seem to get a problem. Even uploading the raw jpg files is failing. I think my web site allocation is full up ! Does anyone have an FTP site I could put these picture on ?

[wertert]

ps - I can also email them over. Can you get an address to me ?

[wertert]

sorry about the delay. Uploaded to another site. You should be able to get them from;

http://www.eyesociety.co.uk/xda2s/xda2s.zip

or

http://www.eyesociety.co.uk/xda2s

[sorci]

thanks for opening up the PDA2K for us...

1) So how did you finally fixed the loose keyboard????

2) Also, can it be that people that got their keyboard too loosed
used a PDA2K case such as the PEIL FRAMA one?
That case has a large and rather thick plastic that covers the
keyboad and goes between the keyboard and the body, it seems like it may case the keyboard to be loosed after sometime.

Thanks

[pvbutler]

2) The mic is actually quite large - if the mic hole in the casing was larger I think the people-ask-me-to-speak-louder problem would be improved.


Did you make any modifications to the phone to improve the ability of the mic to pick up your voice?

[Anonymous]

Yes sorci's right! The gap increased since I got my i-mate into such a case with a thick plastic cover over the keys. Everyday i notice it incresing. Loox like paranoia :-) Well, what to do with the problem? Living in Russia I got no hopes for friendly product support. Have to solve it by means of a screwdriver and a hammer. Wish me luck, colleagues.

[Anonymous]

Yes sorci's right! The gap increased since I got my i-mate into such a case with a thick plastic cover over the keys. Everyday i notice it incresing. Loox like paranoia :-) Well, what to do with the problem? Living in Russia I got no hopes for friendly product support. Have to solve it by means of a screwdriver and a hammer. Wish me luck, colleagues.

[chris.k]

I fixed my slider problem i have posted some pictures in 5 megapixel quality for clarity.unclip white plastic clips from bottom of slider plate and then Bend sides of slider plate out slightly,refit slider plate and plastic stop clips and you get smooth steady reistance all the way with no more gaps....ENJOY