Possibly working MMS on Magneto

[ivant]

Hey all,

i have found a new mms program that is currently in beta testing that seems to work so far in wm05. the address is http://electricpocket.com/products/pixermms.html you can find the download there near the bottom, the correct one is where it mentions xda.

i however am unable to test send/receive features because i cant work out how to set up gprs/wap in magneto some help with this would be appreciated.

[toenailed]

THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again..

PS dont use local number coding instead use international Number coding
example

09173xxxxxx4 <- local
+639173xxxxx4 <-international

if you cant connect to GPRS you need to connect manually
(Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)

try any of this three cab see which one will work for you

[awojtas]

I wasn't able to get this to work. Stayed stuck on "0% Connecting" even when my GPRS connection was established prior. Funnily enough, if i DIDN'T establish the GPRS connection manually then it said "Authentication OK" even though it wasn't connected to anything! Then it would just hang.

I have to soft-reset to get out of it as "Cancel" does not work.

Using:
WM2005 1.50g
Radio 1.17
i-mate PocketPC
Vodafone NZ

I have not had any joy with MMS Composor 2.0.0.20 for Magneto either (hence why I'm trying this). I am about to install EzWAP 2.5 and try that again. Had some issues with it though, will try again. MMS is just handy to have. You wonder what messages you're missing out on without it

[jenellej]

Originally Posted by toenailed THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again.. PS dont use local number coding instead use international Number coding example 09173xxxxxx4 <- local +639173xxxxx4 <-international if you cant connect to GPRS you need to connect manually (Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)

Toenailed,

Does this use the Smart/Globe MMS Settings or the Smart/Globe Internet(GPRS) Settings from the Autoconfig app?

Thanks

[TiBiSMART]

Sending is work perfectly, but the receive...

[rictec]

hello to all

i have allready tryed that prog and it keeps saying that the messege was reject for unknon reason and to check my card for mms etc
card as mms enable
it says that allways the diference now is the international nunber format now it says 10% 20% to 100% them it gives me the error

i manualy conect but no luck
so i get Messagw rejected- no reason given
wap service unavailable
Please check with you operator ....etc etc

help needed
thanks

[jenellej]

Originally Posted by toenailed THNAKS IVANT .. yes CONFIRMED PIXER can send MMS using MAGNETO .. but i cant receive an MMS (need to confirm yet) .. at least this is a good start .. .. thanks again.. PS dont use local number coding instead use international Number coding example 09173xxxxxx4 <- local +639173xxxxx4 <-international if you cant connect to GPRS you need to connect manually (Start->Settings->Connections tab->Advanced Tab->Select Networks Button->Edit Button->Tap and Hold the Modem Connections then connect)

Toe,

Could you post your settings for Pixer4?

My settings are below and I cant seem to send nor receive..

Thanks..

[toenailed]

hi jenellej.. just run the GPRS cab ..

under in Service use Globe MMS Settings or Smart MMS Settings or Sun MMS Settings

for sun

"Gateway"="202.138.159.78"
"MMS URL"="http://mmscenter.suncellular.com.ph"


for GLobe

"MMS URL"="http://192.40.100.22:10021/mmsc"
"Gateway"="192.40.100.20"

for Smart

"MMS URL"="http://10.102.61.238:8002"
"Gateway"="10.102.61.46"



i already try the GLOBE and SUN .. but i havent try it with SMART yet

one last thing .. during sending .. the connectivity will not popup that it is connecting to GPRS .. but Pixer4 will say it connects .. suprisingly it does send without the GPRS Connecting notification appeared .. so its normal that you though it doesnt established a connection but in fact it does ..

PS Dont install also ArcSoft MMS COmposer

[mariolouis]

I manually configured my connection settings. But there should be no problem using toenailed cab. I used to have problems, maybe because it causes conflict with Arcsoft MMS. I uninstalled it, then it worked!

[rictec]

can ´t get it ti work in vodafone.pt i have tryed every possible combination and still get the message rejected for unknown reason
i will not give up lol

gateway 213.30.27.63
url http://mms/servlets/mms
port 9201