This method causes your serial number to change to 00000000 (which isn't a problem as such as this isn't currently used for anything) but there is a new method which involves directly hex editing the nv_data.bin file, which may be faster and does not change your serial number. You can find the details here: http://forum.xda-developers.com/showthread.php?t=843323.
First up I'll say that I'm not incredibly familiar with Galaxy S firmware changes/modding, and this mostly builds on work done in these areas, so not all these steps may be necessary but they worked for me. If someone can suggest a faster way to do this/unnecessary steps then please go ahead and reply with them!
This unlocked my Network Locked Australian Galaxy Tab and so I assume should work for others.
You should back up your /efs/ folder before you proceed as you may need this to undo if something goes wrong.
*I take no responsibility if something goes wrong!*
- Root access
- repair_nv_data.zip (from http://forum.xda-developers.com/show...9&postcount=94)
- The Android SDK for ADB, Root Explorer or some similar file system explorer/editor
(If you have US firmware with no Phone software, you may need to flash European firmware as described here: http://forum.xda-developers.com/showthread.php?t=838250 ).
Firstly, on your phone dial *#7465625# and check if the Network Lock is set to [ON], if so then your phone is locked (duh), so continue.
1. Use Superoneclick (http://forum.xda-developers.com/showthread.php?t=812367) to root your phone (the other z4root method may work as well, but this isn't what I used).
2. Either use ADB or some other method to rename or delete (backup first):
(I just used Root Explorer to rename them to something else).
3. Restart your phone and then go into the /efs/ directory and see if the 'nv_data.bin.md5' file has been re-created by your phone, as long as it has been created then you can proceed.
4. Go to http://forum.xda-developers.com/show...9&postcount=94 and download the repair_nv_data.zip file (the credit for all of this mostly goes to that thread and helroz).
5. Install 'busybox' from the Market. Once you install it, you actually have to run it and properly install it (the Market app is basically an installer) - the files in the above zip have a dependency on this.
6. Extract the above zip to your PC, plug in your Tab in USB debugging mode. Run the Step 2.bat from the extracted file. You may need to allow the script super user access several times. This should copy the /efs/ and a bunch of files into a directory with a french name.
7. Run the Reparation_nv_data.jar file. (You will need Java for this step.) It will prompt you to enter two numbers, which are your pseudo-unlock codes. I entered '11111111' and '11111111' (eight 1's) both times. This rewrites the nv_data.bin file to be simunlocked with these details.
8. Run the Step 4.bat. Your superuser app (the one installed when you rooted using SuperOneClick) will need you to allow each command to have root access so keep an eye on your Tab. You may need to press y/n a few times if you encounter errors. This is uploading the edited nv_data.bin onto your Tab.
This batch file will stop several times and need you to hit a key when it pauses. My Tab rebooted halfway through this batch file - when it did this I waited for it to fully reboot back to the lock screen before pressing a key to make the script continued while the Tab was actually able to respond to its commands.
9. Towards the end of its execution it rebooted a second time. It paused during loading up and had some yellow writing on the screen saying it was updating media (I assume it was rebuilding the nv_data.bin). Leave it for a minute and it will prompt you to reboot/some other options. Just press whatever it wants (home I think) to reboot the phone - you don't want any of the other recovery options.
10. Go into your dialer and put in *#7465625# again and (hopefully) voila! Your phone should no longer be network locked. Try a SIM from a different provider to make sure.
Edit: I had to go out and actually buy a prepaid SIM to confirm that all was working with a different provider. Attached are screen caps of my Tab on two different networks, as well as the network status screen, making/receiving calls etc. all works on both.