Attend XDA's Second Annual Developer Conference, XDA:DevCon 2014!
5,736,958 Members 52,809 Now Online
XDA Developers Android and Mobile Development Forum

[Official] Augen Gentouch78 Rooting and Development [Working Android Market!]

Tip us?
 
Asadullah
Old
#1521  
Asadullah's Avatar
Senior Member
Thanks Meter 280
Posts: 875
Join Date: Aug 2010
Location: casselberry

 
DONATE TO ME
Quote:
Originally Posted by Tcsnyder View Post
i just rooted this augen gentouch for a friend and now i am stuck in bootloops. and ideas on what to do? during reboot it does still have access to adb.

i did not have clockwork installed yet, it was net on my todo list
Before your friend kicks your butt or makes you buy him another (or both), You should try to flash the recovery.img then boot into recovery wipe and install a rom.
 
demon_by
Old
(Last edited by demon_by; 29th November 2010 at 05:34 AM.)
#1522  
Junior Member
Thanks Meter 0
Posts: 1
Join Date: Nov 2010
Location: Minsk
I do it!!!
I have installed clockworkmod recovery on my GPAD G10, with really working navigation buttons.
What I do:
I have extracted kernel from bootimage and move it to recoveryimage (for m701), and so I have working buttons on GPAD G10.
to get bootimage open cmdconsole in windows and type
adb root
adb remount
adb shell
# su
# cat /dev/mtd/mtd0 > /sdcard/boot.img

Then I extract kernel from boot.img with this instruction http : //android-dls.com/wiki/index.php?title=HOWTO:_Unpack%2C_Edit%2C_and_Re-Pack_Boot_Images

Then split recoveryM701 image to kernel and ramdisk with split_bootimg.pl.
Then I add recovery ramdisk to kernel from boot with mkbootimg.
Then I change next bytes in hex editor
0x0f 10h --> 40h
0x17 11h --> 41h
0x1f 10h --> 40h
0x23 10h --> 40h
0x25 08h --> 10h
add 00h 2048 times before [0x800 d3 fo ...] so that [d3 fo ...] starting at adress 0x1000
And now reflash recovery.
after reboot recovery I wait for a minute, while all three buttons be able to work.

SORRY FOR MY ENGLISH.
Attached Files
File Type: zip recovery_GPAD_G10.zip - [Click for QR Code] (3.29 MB, 160 views)
File Type: zip flash_image.zip - [Click for QR Code] (12.2 KB, 109 views)
 
fun_
Old
#1523  
Senior Member
Thanks Meter 637
Posts: 2,376
Join Date: Aug 2010
I made some ClockworkMod Recovery images.
http://teamtelechips.naobsd.org/experimental/

of course please use carefully. no warranty.

D7: DAWA D7, iMiTO iM7, Augen GenTouch78, Smartbook Surfer
M1001: Haipad M1001
M701: Haipad M701(-HDMI/R), Pandawill G10(former model)
NanoPad: iNet NanoPad, Cherrypal CherryPad
P7: Phecda P7
X5A-G: X5A with Gsensor(later model), Pandawill G11(later model)
X5A: X5A without Gsensor(former model), Pandawill G11(former model)
 
xboxhacker
Old
#1524  
Senior Member
Thanks Meter 1
Posts: 111
Join Date: Aug 2009
Quote:
Originally Posted by fun_ View Post
I made some ClockworkMod Recovery images.
http://teamtelechips.naobsd.org/experimental/

of course please use carefully. no warranty.

D7: DAWA D7, iMiTO iM7, Augen GenTouch78, Smartbook Surfer
M1001: Haipad M1001
M701: Haipad M701(-HDMI/R), Pandawill G10(former model)
NanoPad: iNet NanoPad, Cherrypal CherryPad
P7: Phecda P7
X5A-G: X5A with Gsensor(later model), Pandawill G11(later model)
X5A: X5A without Gsensor(former model), Pandawill G11(former model)

Thank you for your hard work in getting 2.2 and recovery's to these chi-pads
 
tomwsmf
Old
#1525  
Junior Member
Thanks Meter 0
Posts: 2
Join Date: Nov 2010
Quote:
Originally Posted by fun_ View Post
I made some ClockworkMod Recovery images.


D7: DAWA D7, iMiTO iM7, Augen GenTouch78, Smartbook Surfer
I have an Augen Gentouch78 and want to thank you for your work on this. One question...after getting nandroid to restore the proper files it booted up into the new system great ......but the touchscreen was not working at all. The hard buttons worked.

I did a data and cache wipe again just to make sure that was not the issue..still no touch screen.

Did I goof up somewhere? Thanks for any advice....

-tomwsmf
 
fun_
Old
#1526  
Senior Member
Thanks Meter 637
Posts: 2,376
Join Date: Aug 2010
Quote:
Originally Posted by tomwsmf View Post
I have an Augen Gentouch78 and want to thank you for your work on this. One question...after getting nandroid to restore the proper files it booted up into the new system great ......but the touchscreen was not working at all. The hard buttons worked.
"restore the proper files"... you are talking about CyanogenMod(froyo), right?

touchscreen doesn't work yet. see
http://www.slatedroid.com/showthread.php?t=11542

I want to know something will be changed with newer kernel. (but I think no...)

I don't have D7/GT78. it is very difficult to solve problem without device.
 
miraclemaker
Old
#1527  
Junior Member
Thanks Meter 0
Posts: 3
Join Date: Oct 2010
I read on one of the other threads that you have to backup the touchscreen config and then restore after upgrading to froyo to get teh touchscreen to work. Has anyone tried this?
 
bL33d
Old
#1528  
bL33d's Avatar
Senior Member
Thanks Meter 61
Posts: 831
Join Date: Mar 2008
Location: Illinois
Just got one of these off Amazon. Has auto rotation out of the box and I rooted it with z4 but can't for the life of me get clockwork flashed on this thing.

Tried adb and terminal emulator to no avail. Not sure if I have flashimage on it though.
Where can I get it and how do u get it on the device...
LG G2
[ROM] [AOSP] TEAM GUMMY
-------------------
Previous - Verizon Note 3
Previous- note 2
 
ZekeD
Old
#1529  
Junior Member
Thanks Meter 0
Posts: 3
Join Date: May 2008
Quote:
Originally Posted by fun_ View Post
I made some ClockworkMod Recovery images.

of course please use carefully. no warranty.

D7: DAWA D7, iMiTO iM7, Augen GenTouch78, Smartbook Surfer
M1001: Haipad M1001
M701: Haipad M701(-HDMI/R), Pandawill G10(former model)
NanoPad: iNet NanoPad, Cherrypal CherryPad
P7: Phecda P7
X5A-G: X5A with Gsensor(later model), Pandawill G11(later model)
X5A: X5A without Gsensor(former model), Pandawill G11(former model)
So it may have just been too long for me to remember doing it right, but I downloaded the D7 (20101201) and flashed it with ADB. But nothing changed except the pre-boot animation. It still boot up as 2.1, is this not a 2.2 update? The touchscreen worked as well, so I assume it's not (or I just did it wrong).

Thanks!
-Zeke
 
fun_
Old
#1530  
Senior Member
Thanks Meter 637
Posts: 2,376
Join Date: Aug 2010
Quote:
Originally Posted by ZekeD View Post
So it may have just been too long for me to remember doing it right, but I downloaded the D7 (20101201) and flashed it with ADB. But nothing changed except the pre-boot animation. It still boot up as 2.1, is this not a 2.2 update? The touchscreen worked as well, so I assume it's not (or I just did it wrong).
please clarify
1. which do you want, ClockworkMod Recovery or CyanogenMod?
CyanogenMod thread is here
2. what did you do?
too difficult to understand from "flashed it with ADB".

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes