[KERNEL][CM9][24/03/12] Icy Glitch V14 - BETA - LiveOC - Voodoo - DIDLEv2 - USBhost

Search This thread

grifovunque

Senior Member
Nov 9, 2009
646
109
genova
Why with this kernel alla ad lock program doesn't work?
Thank you for now the Best kernel

Sent from my SGH-I9000 using XDA App
 

alcaprone

Senior Member
Jan 3, 2012
267
14
I've searched but couldn't find it..how can I know if I have the requisites to flash this kernel like GB bootloaders and usb settings on AOKP 23?
 

Pipperox

Senior Member
Nov 11, 2010
134
84
It works fine, I was just curious what RGB values were common to use, that's all.

I'm not trying to get a sassy answer. I mean all I ask is for you to at least tell me what RGB values you are using so I can try them. You sound like AT&T customer support trying to "help" but then slam the customer.

RGB won't do anything for washed out colors, it will just correct a yellowish or blueish tint.

To fix the washed out colors you need to change your gamma.
I suggest using negative gamma offset values, i use -11 -11 -11, but you should try to see what works with your screen.
 
  • Like
Reactions: LongLiveCappy92

alcaprone

Senior Member
Jan 3, 2012
267
14
I've had or i have and i can install it?sorry because i always have doubt on bootloaders...
And about the USB default mode? how is it possible to see which is enabled?
 
Last edited:

saszseb

Senior Member
Jan 30, 2011
4,613
1,018
Hungary, Gy-M-S.
I've had or i have and i can install it?sorry because i always have doubt on bootloaders...
And about the USB default mode? how is it possible to see which is enabled?

You are on gingerbread bootloader.
You should ask if mass storage or MTP is used on AOKP. Glitch uses Mass Storage. Pls. read the OP!

Sent from Slim ICS_2.7
 
Last edited:

CaraMuuu

Senior Member
Sep 26, 2010
125
29
Granada / Kraków
Bug report:

For me neither BLN(enabled in NSTools) nor CMLed Notification are working properly. After I get a SMS or Whatsapp message oder Facebook Notification the LED's are lighted for about 3 seconds and than they are turned off without touching the phone. With Devil 1.1 Bln and LEDNotification are working without problems.

Settings in NSTools:
BLN: Bln enabled, timeout 4000s, NSTools Service enabled. Also tried it with diesabled NSTools Service
LED Notification: Bln disabled, Led enabled, timeout 4000s, NSTools Service disbled(also tried it enabled). Of course LED Notification ist activated in Settings(but also tried it after disabling it in settings)

With the Glitch V14 B3 LED Notififation worked too.

Is it a Problem of the Kernel or of my phone?
I'm experiencing the same problems. I tried to configure it from NSTools and BLN program, with same results. The LEDs on my i9000 turn on for a couple of seconds when I receive an email, but it doesn't react to missed calls or sms.
 

bazsano1

Member
Jan 14, 2012
20
4
Budapest
Hi,

I have a bug to report.
2 days ago I used my phone to navigate with car (iGO) and after that I realized my phone drains battery faster than usual. I checked CPU Spy and my phone ran constantly on 800 MHz. I was on CM9 B16, latest glitch kernel, no OC, max cpu was set to 1200 and glitchassv2 governor. Also diddle enabled.

Tried with different settings (OC, governor) but same result. Also tried reflashing the same kernel, but did not solve the issue. Had to revert back to B2, since that's the most stable for me.

Also I have problem with led notif. Light goes away after couple of sec.
 

Taranis

Senior Member
Aug 31, 2011
541
93
Poland
AOKP build 23 beta 2.1 with latest Icy Glitch

GPS fix is very slow - about 5 minutes of waiting or more (central Europe).

I rebooted today my phone with GPS turned on and after reboot my battery has decreased from about 50% to 8%! (after few minutes I've got about 15%)

Guys, are you experiencing any issues related to GPS?
 

sixstringsg

Retired Forum Mod / Retired Recognized Developer
Apr 11, 2009
5,171
6,903
Dallas, TX
AOKP build 23 beta 2.1 with latest Icy Glitch

GPS fix is very slow - about 5 minutes of waiting or more (central Europe).

I rebooted today my phone with GPS turned on and after reboot my battery has decreased from about 50% to 8%! (after few minutes I've got about 15%)

Guys, are you experiencing any issues related to GPS?

Explanation of GPS: A) you're running a Bet kernel. B)You're running an unofficial ROM, that is more like Alpha status C) You own a Galaxy S, you are lucky that your GPS gets you in the right hemisphere within an hour. Our GPS stuff hasn't changed since we started making ICS builds, and it is the same GPS stuff from Team Hacksung. As for your battery issue, that's what happens sometimes with reboots.
 
  • Like
Reactions: jeebspawnshop

Taranis

Senior Member
Aug 31, 2011
541
93
Poland
Samsung ROMs and all based on its have good GPS performance. I could get GPS fix in less than minute, so GPS on our I9000 can be quite good.
 

st4rk

Senior Member
Aug 19, 2007
747
90
London
Samsung ROMs and all based on its have good GPS performance. I could get GPS fix in less than minute, so GPS on our I9000 can be quite good.

Mine locked in under a minute.

If you are using ICS you are basically using a port from the nexus-s. Because of that and the fact that Samsung don't open source there hardware drivers, we have rely on awesome devs that try to fix functionality, but without sources that isn't always possible.

If you don't like this you can start by signing this: http://www.change.org/petitions/samsung-mobile-help-third-party-development-achieve-full-potential-of-purchased-devices

Sent from my GT-I9000 using xda premium
 
Last edited:
  • Like
Reactions: Leegalaxy

DROCSID

Senior Member
Mar 31, 2010
2,344
988
Somewhere deep
Well, with FourSquare I'm having a good lock on #experimental and V14 b5
(and always had on the older ones except a few). Well, it might take a little
longer, but that's not a big deal, we KNOW WHY, so it's less frustrating imho.
 
  • Like
Reactions: revthanki

Top Liked Posts

  • There are no posts matching your filters.
  • 149
    These kernels are provided as-is without warranty. I'm not responsible for any problem you can encounter with your phone or if your cat suddenly dies.
    Although, don't expect support even if I will eventually help since I love cats.


    icyglitch.png



    Note : These kernels are only compatible/tested with CyanogenMod 9 based roms.
    Use them on any other rom at your own risks. You won't get support from us.



    Overview :
    - 3.1.10 linux base
    - LiveOC
    - Custom Voltage
    - Battery Life eXtender
    - DIDLE
    - Voodoo Sound 10
    - PMFAST mode for best wifi performance (different low power mode than default, using a bit more power).
    - USB host mode support
    - 342MB RAM
    - Various tweaks for more speed and battery saving

    CHANGELOGS IN #2 POST


    By default, no overclock/undervolt is applied.

    You'll need NSTools to use/enable all the features of this kernel.
    (Available for free on the Android market)


    Downloads

    Glitch kernel (CWM flashable only)
    Glitch Kernel Updater app now available on the Android market to support us !
    i9000 :

    - 24/03/2012 - V14 B6

    PLEASE FLASH A FREAKIN' GB BOOTLOADER IF YOU WANT TO USE THIS KERNEL !

    WARNING : THIS KERNEL IS USING MASS STORAGE USB MODE BY DEFAULT (TEAMHACKSUNG'S CM9 DEFAULT SETTING). IF YOUR USING A DIFFERENT ROM AND IT IS USING MTP BY DEFAULT, MAKE SURE TO SWITCH TO MTP IN GLITCH RECOVERY JUST AFTER FLASHING THE KERNEL, OR YOU'LL END IN A BOOTLOOP. YOU CAN THEN SWITCH TO MASS STORAGE IF YOU WANT AFTER A FIRST BOOT.



    Do you want to discuss on this kernel, get the fresh news on development, or become a kernel tester ?

    Join the IRC channel from your web browser
    herehttp://webchat.freenode.net/?channels=glitchkernel ! No registration needed :)
    Make sure the channel is "#glitchkernel" and you're set.

    For those who already have an IRC client,
    here is the server : irc.freenode.net
    port : 6667
    Channel : #glitchkernel

    -------------------------
    Source :
    - Glitch repo : https://github.com/organizations/Glitchkernel

    Who is the Glitch team ?
    - Kernel developement : ssewk2x & Tk-Glitch.
    - Public relations / web hosting : Sixstringsg.
    - App developement : Smasher816.
    - Extreme overclocking testing : Shaolin95
    - Beta testers team, with members coming and leaving :D

    Credits :
    Pawitp, jt1134, Morfic, Ezekeel, Zacharias.maladroit, Supercurio, lippol94, sztupy, Eugene373, Franciscofranco

    Thanks to the donators and everyone bying the Glitch Kernel Updater app from the market, it's much appreciated and encourages us to continue our work !

    Thanks to the beta testers team and to everyone helping me to debug and find new useful things to integrate !

    Without all of you, this kernel wouldn't be !​
    54
    Changelogs :

    V14

    BETA 7 - Currently in development :

    - Upstream sync
    - Added mem increase mod by Kali (CM Team) - 384MB RAM available with 720p recording working. It does need a patch on the rom side to work though. Make sure your rom supports it or you'll get broken 720p recording
    - Force fast charging support - Thanks to Chad Froebel
    - Fixes for light sensor
    - Fascinate : Fixes for orientation sensor / Needs updated libs to work
    - Recovery backup really fixed this time
    - Fixup of our LiveOC code for selective LiveOC to be stabler and to most likely prevent memory corruption at low frequency resulting in GPU crash and/or reboots on some devices
    - Updated and fixed GlitchassV2 governor for it to work correctly with LiveOC
    - Added fixes on DIDLEv2 from Stratosk

    ...

    24/03/2012 - BETA 6 :

    - Upstream sync (modemctl, compass fix..)
    - Fixed BLN, and added blink support (available through NSTools)
    - Disabled Samsung sleep patches from Teamhacksung to prevent SODs
    - Fascinate : Ported ssewk2x phantom keypress filter code from Glitch V13.1
    - Vibrant : Merged GPS changes from FaultException
    - Moved back to Deadline ioshed as default to fix nandroid
    - Added Derteufel's selective LiveOC mod - It will prevent low frequency steps to OC, potentially providing enhanced stability and powersaving
    - Fixed potential bug in vfat fs driver
    - Fixed bug in ext4 fs driver
    - Merged some audio changes from Teamhacksung
    - Added touch support in Glitch recovery (incomplete)
    - Some cleaning

    22/02/2012 - BETA 5 :

    - Voice audio through dock, thanks to xcaliburinhand (should fix related issues with Glitch volume boost hack)
    - Renamed SmartassV2 governor to "GlitchassV2" to prevent latest NSTools version hanging
    - Added FranciscoFranco Conservative governor tweaks for more speed
    - Added a DIDLE enabler into screensate scaling script to kill BT in sleep and make DIDLE work with both TOP=ON and TOP=OFF. You'll need to enable screenstate scaling in Glitch menu from recovery in order to get DIDLE to use this (disabled by default). It's mostly for testing purposes - Feel free to report your experience with it.
    - Moved back to previous sysinit to prevent the DIDLE enabler script to make the phone hanging on the bootlogo. Also fixes screenstate scaling making the phone unbootable, and some SOD/COD issues for guys using some other tweaking scripts
    - Implemented BLN9 port from Derteufel with NSTools compatible sysfs. This way all the unsupported roms will get led notifications, and CMLed haters will hopefully stop to yell..
    - The flash-time script has been updated to be able to clean more stuff
    - A few fixes on the wifi driver to work better with our devices Please report your experience with DIDLE enabled. It may be required to disable DIDLE on some phones to prevent SOD/COD/softreboots or other instabilities. Also MAKE SURE YOU HAVE A DAMN GB BOOTLOADER !
    - Reverted modemctl changes from Teamhacksung - should fix data issues some are having

    21/02/2012 - BETA 4.1 :

    - Reverted sleep GPIO stuff from THS stock samsung port. Should fix SODs some are encountering.

    21/02/2012 - BETA 4 :

    - Fixes on LiveOC and custom voltage from Ezekeel
    - Fixes + various enhancements on I/O scheduling (up to 50% I/O speed improvement compared to beta 3)
    - Fixed touchscreen freezing randomly
    - Fixed various bugs here and there
    - Back from Eugene's DIDLE to Ezekeel's DIDLE v2 mod (available through NSTools again) -> You may encounter SoD if enabled with wifi ON.
    - Load balancing improvements
    - Updated FIOPS I/O sched
    - Sync with THS latest source

    09/02/2012 - BETA 3 :

    - LiveOC frequency steps changed again - Now all steps are using a 200MHz bus by default, so pushing liveOC % will give the same bus speed on all steps
    - Default Int voltage for 1GHz set to Samsung's default to fix instability on bad overclocker devices
    - Fixed recovery not displaying long lists items as well as cosmetic fixes - updated to latest source from Koush
    - Fixed init.d support
    - Switched to Tiny SHMEM, better on small devices
    - Ext4 optimizations for more speed
    - Readahead values tweaked a bit - should be better overall
    - Fascinate : Use GB driver for i500 to fix prox/light sensors, and updated RIL init (Thanks to Sbrissen)
    - Fsync() enabled again to prevent/limit data loss while experimenting with overclocking, and to (probably) fix the reboot->bootloop issue
    - Disabled frame pointer, FIQ debugger, and some more debug stuff, Morfic-like :D
    - Some writeback quickfixes
    - Updated wifi drivers with added net fixes and optimizations
    - GlitchOndemand polling tweaking for more stability
    - Misc tweaks

    29/01/2012 - BETA 2 :

    - Updated to linux 3.1.10
    - A few fixes on LiveOC (Thanks Ezekeel)
    - GPU load affecting CPU frequency scaling (200 vs 100MHz) is back
    - Removed CFQ and BFQ, and added SIO & the all new flash oriented FIOPS i/o schedulers - FIOPS is now default
    - Better VM tweaks
    - Fixed GlitchOndemand polling to fix stability issues some are encountering
    - i/o-less dirty throttling backport from linux 3.2 (thanks to Franciscofranco)
    - Added dynamic writeback & various writeback fixes
    - Proportional rate reduction for TCP (thanks Google :D)
    - Small fix on Lazy gov from Ezekeel
    - Captivate : Port battery charging/fuel gauge code from stock --> Improves (but does not completely fix) phone turning off while
    charging for some users (charging death). (Thanks to Pawitp)
    - Vibrant : Headset buttons fix (Thanks to FaultException)
    - Fixed and now built-in CIFS
    - Changed OC steps (1152 step is now 1160, with 200MHz bus, 1440MHz step removed, added 1400 and 1500 MHz steps)
    - Moved back to "old" DIDLE implementation for now
    - Glitch call volume hack is back
    - Various optimization and CPU load reduction in some typical cases
    - Verizon Fascinate : fix for boot issue on preview 5 and BETA 1
    - Updated USB host driver to build 5

    23/01/2012 - BETA 1 :

    - Dock audio support.
    - Added gamma V1 hack and MDNIE bypass mode.
    - Added more governors to play with & tweaked interactive and ondemand.
    - DIDLE V2 added back for people who want to mod their framework (It may/will cause sleep of death on some devices, as always)
    - Battery charging calculation fix (BLX will now show 100% as default).
    - Changed overclocked steps for more stability and easier setup.
    - Dm-cache support.
    - Updated linux base to 3.1.9.
    - Improved memory management and cache handling.
    - General speed enhancements.
    - Fsync disabled.
    - Added an entry in the GLITCH menu (in recovery) to choose between mtp and mass storage USB mode.
    - USB host mode (OTG) - updated to build 4, from sztupy - thanks to him and everyone involved in this !
    - Bootmode injection fix from pawitp.
    - Optimized RWSEM algorithm.
    - VM and I/O performance enhancements.
    - Added BFQ i/o scheduler.
    - More cleaning, various optimizations and power management tweaks.

    PREVIEW #5 : (For build 13+)

    - Even better 720p video recording.
    - Fixed Vibrant GPS.
    - Added back various governors.
    - New colors from Samsung stock.
    - Toolchain sorcery with linaro 4.4.5, and using NEON and hardfloat optimizations.
    - Bootmode injection support.
    - Various speed enhancements.

    PREVIEW #4 :

    - Fixed softkeys on Captivate and Fascinate.
    - Refresh rate back to 60Hz as the uncap breaks colors (it'll help to get better smoothness on heavy games too).
    - Better 720p video recording.
    - Tweaked governors and schedulers for testing.
    - Big cleanup.
    - Removed DIDLE for now - useless anyway, the rom prevents it to work correctly.

    PREVIEW #3 :

    - Added color adjustments to Nexus S framebuffer.
    - Dock audio stuff back in.
    - Cleanup.

    PREVIEW #2 :

    - Fixed GPS issues.
    - Moved to Nexus S Framebuffer (stock colors, no more color adjustment available).

    25/12/2011 - V14 Preview #1

    - Compatible with Teamhacksung's ICS/CM9 builds 10 or higher.

    - Now using linux 3.0.8 base from the Nexus S drop
    - Upstream synced to the latest from THS (TVout, cleanup, 3.0 port..)
    - Reverted to stock CM LED Notifications (fixing all the previous problems some users encountered with BLN) / No more BLN app needed, enabled by default.
    - Removed Voodoo Color, and back to stock implementation.
    - Added support for a new low power mode on wifi chipset, enhancing signal reception and stability, at the cost of a bit higher power consumption.
    - Back to NEON mfpu for now
    - Full support for init.d scripts
    - Readahead value back to 1024 for better results (SDcard read Cache)
    - Fixed headset buttons
    - Fixed randomly freezing softkeys
    - Big cleanup and rewrite of some stuff
    - Removed the 200MHz lock when the GPU is active for battery life. Depending on your launcher and/or widgets, you'll get some slowdowns. Change min freq to 200 to fix it.

    Major additions, ported from Ezekeel's work on the Nexus S (thanks Morfic !) :

    You will need NSTools app, available for free on the market, or here : http://xdaforums.com/showthread.php?t=1333696

    - Added "LiveOC" system, giving access to GPU/bus overclocking on the fly, per 1% step.
    - Added "Custom Voltage" control, giving access to ARM and Internal voltage undervoling and overvolting. (This makes the previous leakage system obsolete, which is now removed.)
    - Added "Battery life eXtender" mod, allowing the user to limit the maximum charge percentage to preserve the battery life (not the battery runtime obviously)
    - Added support for DIDLE V2, a very low power mode that will help battery life in many idle/semi-idle cases.
    - Lazy governor sysfs, to enable or disable the frequency ramping up when screen is off (to end tasks quicker to sleep faster).


    Keep in mind CM9 is at early stages of development and contains many bugs still.

    43
    Here's a new kernel to play with. Big mem, compatible with all video formats, and TWRP recovery included. Don't respond to this post with "thanks" or anything like that, just hit the thanks button. If you have issues, post. http://androtransfer.com/get.php?p=sixstringsg/galaxys/CM9-galaxysmtd-Glitch-TWRP-TEST.zip
    27
    New build: http://goo.gl/qU6Ua
    Fixes:
    Nandroid's work now
    BLN works 100%
    19
    BETA 3 is available ! I hope you'll enjoy it ;)