hello,
I am a little lost.
What is the difference between "Recovery-raw.img" and "recovery_leo.img"?

-My first Recovery flash with daf.exe was as this (exemple):
"misc ya 1M
recovery rrecov|ro|nospr recovery-raw.img
boot yboot|ro 5M
system ya 350M
cache ya 2M
userdata ya|asize|hr allsize"
(The file "recovery-raw.img" is in the directory recovery)

With this configuration, the various installations nand Android worked perfectly.

I installed a nand JB 1.2 of Tytung by following the instructions for the sizes of the partitions, so:

"misc ya 1M
recovery rrecov|ro|nospr 5M recovery_leo.img
boot yboot|ro 5M
system ya 350M
cache ya 2M
userdata ya|asize|hr allsize"
(The file "recovery_leo.img" is in the directory recovery)
The rom JB settled down correctly.

My problèm:
Since then, I cannot install any more the others Rom Android Sense, GB and Rom WP7.
Only Rom JB can be installed.

I think that I made an error with recovery-raw.img and recovery_leo.img.
You can help me?
Thanks

Sorry for my bad English!

shouldnt make any difference whether its _leo or -raw, so long as the flash,cfg matches.

Originally Posted by dani07

Since then, I cannot install any more the others Rom Android Sense, GB and Rom WP7.
Only Rom JB can be installed.

explain what error you get

For android:
Erreur: Bootloop on reboot Aroma at the end of' installation of Rom nand Sense or GB.

For WP7:
Starting up WP7:
Message: "error fatal 3"

I have to begin again everything:
1) Task29 (OK)
2) Reinstall W6.5 of origin (OK)
3) Check HSPL 2.08 and radio (OK)
4) Reinstall Malgdr 1.13 (OK)
5) Recovery installation for nand android with usbflasher (ok)
this recovery:
"misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 350M
cache ya 2M
userdata ya|asize|hr allsize"

6) Return on ADrecovery...

I remain blocked on " gogogo ", no adrecovery menu!

7)If I flash again this recovery:
"misc ya 1M
recovery rrecov|ro|nospr 5M recovery_leo.img
boot yboot|ro 5M
system ya 350M
cache ya 2M
userdata ya|asize|hr allsize"
I have the menu ADrecovery

If I try to install a Rom sense or gb, I have again the bootloop aroma problem.
And no problem if I install Rom JB or ICS 4.0.4 ???

Nota:
I had installed several times Rom Android without any just problem changed sometimes the sizes of partition for sense or gb.
I had installed several times also WP7 with no problem at all.

I do not understand any more!

wp7 and ad recovery for dual boot

---

Hi, im using wp7, as main rom on my hd2. But i want install android, on same sd.
If i copy the sd recovery to my sd card, and select boot ad sd, the recovery don't boot.

Stuck after go! go! go!
than reboot.

I try the last version from dropbox, now after go! go! go! i see a green htc logo, but after the phone reboot.
Anyone can help me, how can i solve this problem?

CWR 6.0.2.7

---

All,

I have compiled a new version of Recovery, it's the standard CWR, so I haven't made any modifications yet.

• CWR enabled zip
• IMG file

Let me know how it goes

I am working to get CM10.1 compiled at some point, at the moment I am hitting some hurdles, but hopefully can get something up soon

and, I hope everyone's had a good festive period

Originally Posted by arif-ali

I have compiled a new version of Recovery, it's the standard CWR, so I haven't made any modifications yet.

Great news, arif-ali! Thanks.

Please add support for NTFS as an alternative to FAT32. This will eliminate the need to circumvent the FAT32 4G filesize limit. Tytung already has NTFS support built in.

____________________
Sent from my HD2 JB-CM10 with XDA Premium

Originally Posted by arif-ali

All,

I have compiled a new version of Recovery, it's the standard CWR, so I haven't made any modifications yet.

• CWR enabled zip
• IMG file

Let me know how it goes

I am working to get CM10.1 compiled at some point, at the moment I am hitting some hurdles, but hopefully can get something up soon

and, I hope everyone's had a good festive period

i got an error on both files first with CWM version then i tried to flash the recovery image using android terminal but it is ended with error too

Originally Posted by arif-ali

All,

I have compiled a new version of Recovery, it's the standard CWR, so I haven't made any modifications yet.

• CWR enabled zip
• IMG file

Let me know how it goes

I am working to get CM10.1 compiled at some point, at the moment I am hitting some hurdles, but hopefully can get something up soon

and, I hope everyone's had a good festive period

Getting errors too but I know you'll fix it.
Thanks for making cwr for us.

Originally Posted by arif-ali

All,

I have compiled a new version of Recovery, it's the standard CWR, so I haven't made any modifications yet.

• CWR enabled zip
• IMG file

Let me know how it goes

I am working to get CM10.1 compiled at some point, at the moment I am hitting some hurdles, but hopefully can get something up soon

and, I hope everyone's had a good festive period

Hi arif-ali. Just wanted to let you know that it looks like I have a successful backup with split images. I have not yet tried a restore, but it looks promising. Thanks for not giving up on our legendary HD2!

____________________
Sent from my HD2 JB-CM10 with XDA Premium

Originally Posted by arif-ali

All,

I have compiled a new version of Recovery, it's the standard CWR, so I haven't made any modifications yet.
[LIST][*] CWR enabled zip

Let me know how it goes

I am working to get CM10.1 compiled at some point, at the moment I am hitting some hurdles, but hopefully can get something up soon

and, I hope everyone's had a good festive period

Oh dear!
You save my life. it's 2am and now with this recovery everything works well. I push newest TWRP and I got sdcard mount issues. Doesn't work flash rom functionality on it too and don't get fastboot permission on clk btw. Clear madness. i used 4ext but there the any sdcard won't mount.
Thank yoiu so much!
Simple recovery and I love it