Well, I guess that will teach me to get my hopes up..
While I understand what you are saying about the donation bit, it is rather disheartening to keep hearing that something is coming, only to be put off for device after device ... I really appreciated the work you did, which is why it is such a bummer to see other devices get love after we had been hoping for so long..
Does anyone know the last build of the rom(s) which this is compatible with?
Am wondering about this also. This kernel seems like it hasn't had a lot of activity recently.
Has anyone flashed this with nightly 1118 and the camera patch?
sent from a secret underground bunker
Code:adb pull /proc/config.gz && gunzip config.gz mv config KERNEL_SRC/config cd KERNEL_SRC make mrproper mv config .config make -j8 uImage
[B]* based on the outstanding work of dalingrin and the cm-team[/B]
* Kernel base 2.6.35.14
* KSM support
* CIFS
* UTF8 encoding (included for CIFS)
* Overclocking to 1566Mhz default (max. 1914Mhz)
* Min Clock @ 192Mhz default
* basic NTFS support
* Tweaked ondemand settings to react better while letting cpu1 jump in later
* Snapdragon compiler optimization
* Global CPU Voltage table used for adjusting voltage table (by snq-)
...- Using System Tuner (or any other compatible app) you can now change the
.....Voltage @ each frequency.
* ~8% Undervolted till 1566Mhz
* L2 Performance Push @ 1566Mhz (Original by faux123)
* Overclock till 2157Mhz possible. ALL FREQUENCIES ABOVE 1782Mhz ARE CONSIDERED UNSTABLE!
--(I don't want to increase Voltage any further, this will increase the risk of burning your cpu. So if it is unstable, choose a lower clock!)
* cleaned code, improved performance
adb shell rm /boot/uImage.CyanogenMod
adb shell
mount -o remount,rw /boot
rm /boot/uImage.CyanogenMod
adb shell
mount -o remount,rw /boot
echo "CyanogenMod" > /boot/moboot.default
mount -o remount,rw /system
exit
adb push C:\path\to\the\cm9\ar6000.ko /system/lib/modules/ar6000.ko
adb reboot
adb push C:\path\to\the\cm9\uImage.CyanogenMod /boot
rm /boot/uImage.CM_Bricked-Kernel
[B][U][SIZE="4"]***** v0.6 *****[/SIZE][/U][/B]
Simple:
* Blackscreens fixed (gigantic PM changes from caf)
* Use max L2 Frequency from 1728000Hz to 1890000Hz too (disabled over 1890Mhz for stability reasons)
* fix pmem for HD playback on cm9 A2
* fix boot hang when USB is connected (apparently 64GB Touchpads only)
* see below for the rest :P
* GPU OC @ 320Mhz 3D / 266,67Mhz 2D
* pushed max OC to !2,16Ghz! (2157Mhz) - !!use with caution!!
** I suggest you don't play with it
** unless you know EXACTLY what you are doing.
** This may very well brick a touchpad that cannot handle it. (but 2 of my 3 can :P)
** Default max remains 1566Mhz, during bootup: 1188Mhz.
** If you have no clue: Leave it to the defaults! :P
Detailed:
* bd73231 : max8903b: fix warning: function declaration isn't a prototype [-Wstrict-prototypes]
* 6560d8a : max8903b: print out an error if the device is not set up
* 0da4555 : max8903b: avoid crash in _current_setup if device not setup
* 18aef20 : board: Initialize max8903b_charger_device before USB This should fix some problems occuring while booti
* 1600ebb : PMEM changes required for MSM gralloc to work correctly.
* e4cd4e7 : acpu: Use max L2 Frequency from 1728000Hz to 1890000Hz
* 81f0951 : acpu: Raise max OC up to 2157Mhz +minor comment cleanup
* bc6c08e : change INIT_CONNECTED_PS_DELAY: 30 to 60
* 4b66792 : klog: copy logbuf on init
* 9d6e569 : PM / Core: Introduce struct syscore_ops for core subsystems PM
* f7bbacd : PM: Fix printing IRQ names for pending wakeup IRQs
* c5f2cbb : PM: Wait for completion of the parent resume before resuming
* 9f6ace8 : PM: Introduce library for device-specific OPPs (v7)
* ac959f3 : PM: Prototype the pm_generic_ operations
* 31b5c99 : PM: Remove redundant checks from core device resume routines
* e7f7366 : PM: Use a different list of devices for each stage of device suspend
* 14a931d : PM: Use proper ccflag flag in kernel/power/Makefile
* dd36b42 : PM: Lock PM device list mutex in show_dev_hash()
* abc8f02 : PM: Fix signed/unsigned warning in dpm_show_time()
* 5c29b42 : PM / Suspend: Fix ordering of calls in suspend error paths
* e04c902 : PM / Hibernate: Make default image size depend on total RAM size
* e0a2974 : PM / Hibernate: Improve comments in hibernate_preallocate_memory()
* d2dc39e : PM / Hibernate: Return error code when alloc_image_page() fails
* cda6734 : PM / Runtime: Fix pm_runtime_suspended()
* b4de71f : PM / Hibernate: Fix PM_POST_* notification with user-space suspend
* 02f03c7 : PM / Suspend: Fix bug in suspend statistics update
* 4068f99 : PM / Sleep: Remove pm_runtime_suspended() from __pm_generic_call()
[B][U][SIZE="4"]***** v0.5 *****[/SIZE][/U][/B]
Removed three 2D/3D scaling steps
Raised 3D GPU OC to 320Mhz (was 300 before, stock 266.67Mhz)
Fixed screen/sleep of death
Fixed a coding derp
[B][U][SIZE="4"]***** v0.4 *****[/SIZE][/U][/B]
ksm update from bricked-pyra source
Lowered min voltage once again (now: 700mV)
Updated KGSL driver with bricked-pyramid:
msm: kgsl: 8Stages 3D scaling, highest @ 300Mhz (fraction 33)
msm: kgsl: 6stages 2D scaling, highest @ 266,7Mhz, 33,35% Overclocked (fraction 100)
msm: kgsl: GPU off while screen off!
msm: kgsl: improved KGSL suspend
msm: kgsl: Use the correct virtual address for pmem regions
msm: kgsl: Delay 30ms to make sure GPU is ready during resume time
msm: kgsl: Update pwrlevel_change
msm: kgsl: Add sysfs attribute to turn GPU DCVS off/on
msm: kgsl: Early Suspend drivers
msm: kgsl: Turbo Mode
msm: kgsl: Do not check for idle while suspended
msm: kgsl: Make kgsl_idle_check check if a nap is allowed
msm: kgsl: fix parameter checking in adreno_ringbuffer_issueibcmds
msm: kgsl: Abort kgsl_pwrctrl_wake() when in KGSL_STATE_INIT
msm: kgsl: create singlethread wq instead of per-cpu wq
msm: kgsl: Fixing earlysuspend/lateresume for multiple devices.
msm: kgsl: run kgsl_idle_check after resuming a device
msm: kgsl: fix coding derp for init pwrctrl
[B][U][SIZE="4"]***** v0.35 *****[/SIZE][/U][/B]
init.rc: New /data dalvik cache
init.rc: Fix permissions for new dalvik cache
KSM updates.
Works with CM9 Alpha 0.6
[B][U][SIZE="4"]***** v0.34 *****[/SIZE][/U][/B]
init.rc: Fix init.d script execution @ boot-time by Turl
acpu: Change min/max limits to provide a wider scale range for the enduser
- Increased default voltage @ 1914Mhz (+25mV)
- You can now undervolt until 750mV and overvolt up until 1,425V.
- Don't cook eggs. Please.
msm8960: qdsp6v2: include the HW audio decoder and encoder
msm: audio: qdsp6v2: Acquire wakelocks during record.
msm: 8660: audio: Fix check for out of bound exception
Kernel Samepage Merging (KSM) for ROMs with support for it
[B][U][SIZE="4"]***** v0.31 *****[/SIZE][/U][/B]
Fixed KGSL page faults (Titanium Backup, etc...)
Thanks to dalingrin for finding the missing commit from CAF!
[B][U][SIZE="4"]***** v0.3 *****[/SIZE][/U][/B]
Too much to list here.
Changelog: [URL="http://pastebin.com/raw.php?i=cPS5d3p4"]http://pastebin.com/raw.php?i=cPS5d3p4[/URL]
Change statistics: [URL="http://pastebin.com/raw.php?i=DQsfsSwd"]http://pastebin.com/raw.php?i=DQsfsSwd[/URL]
Summary:
Improves UI reaction.
Improves overall performance.
Fixed a few bugs.
Decreased kernel file-size, we only got 30megs on /boot =/
Optimization Level 3
Addressed total stop of playback when device is going to sleep.
Increased CRC performance, this should speed up everything.
Decreased boot-time.
Increased read/write on disk.
[B][U][SIZE="4"]***** v0.21 *****[/SIZE][/U][/B]
* Bluetooth fixed
[B][U][SIZE="4"]***** v0.2 *****[/SIZE][/U][/B]
ar6000:
* switched to an older android driver version
This is a test for the Wifi issues
Kernel:
* Updated Kernel base to 2.6.35.14, no more palm :P
* Tweaked ondemand settings to react better while letting cpu1 jump in later
* added Snapdragon compiler optimization
* added Global CPU Voltage table used for adjusting voltage table (by snq-)
...- Using System Tuner (or any other compatible app) you can now change the
.....Voltage @ each frequency.
* Let MMFPB drop to 27MHz when processor power-collapsed (by Matt Wagantall)
* cpufreq: adding mfreq override sysfs value
...- Using this will override any governor to the max frequency currently set
* cpufreq: exposing scaling_available_frequencies to sysfs
[B][U][SIZE="4"]***** v0.1 *****[/SIZE][/U][/B]
This is a very early build.
* 2.6.35.palm
* based on the outstanding work of dalingrin and the cm-team
* CIFS
* UTF8 encoding (included for CIFS)
* Overclocking to 1566Mhz default (max. 1914Mhz)
* Min Clock @ 192Mhz default
* basic NTFS support
* Userspace driven configuration filesystem
* ~8% Undervolted till 1566Mhz
* L2 Performance Push @ 1566Mhz (Original by faux123)
* Overclock till 1914Mhz possible. ALL FREQUENCIES ABOVE 1782Mhz ARE CONSIDERED UNSTABLE!
--(I don't want to increase Voltage any further, this will increase the risk of burning your cpu. So if it is unstable, choose a lower clock!)
* cleaned code, improved performance
Will this kernel be updated to work with the latest cm9 nightly or is there anther kernel anyone would recommend for the HP touchpad?
For cm9-ics