What u done right .....but what's ur problem,........... I didn't get u
Sent from my GT-I9103 using xda premium
[Kernel] ardatdat kernel v1.5 [CWM] (OC/ROOT/VR/3G/init.d) (2012-02-05 13:00GMT)
- Thread starter ardatdat
- Start date
-
- Tags
- development
What u done right .....but what's ur problem,........... I didn't get u
Sent from my GT-I9103 using xda premium
It is strange. No one has any problems in flashing the kernel using CWM recovery. Will it be that the zip file is corrupted? Or will it be a problem in the SD card? How about changing another SD card and download the zip file using another browser? Does it help? Thanks.
ok i will try both now, first let me download again, and secondly i will try with sd card again too will update you on it
---------- Post added 5th March 2012 at 12:09 AM ---------- Previous post was 4th March 2012 at 11:38 PM ----------
updating the package i already had, gave me error of SIGNATURE
it showed
E: Signature error (2) or something similar, and paused after a certain initial progress
this happened with mediafire link and zip was in the external sd (copied via usb)
and when i moved the zip to internal sd and tried, no luck too !
so.........last resort, try some other sd card :/
any hints ardatdat ?
Up to now, no hints and with CWM, it will not check for any signatures. Any hints from others?
** Also, maybe you can take a picture of the error screen and upload here to see if any of us could help
Any screen shots will be appreciated
Please describe more to let all of us here to help you out
(for example, after entering CWM, what menu items you have selected ...etc)
try turning off signature verification?
CWM>apply update from .zip file on SD card>Toggle signature verification
CWM>apply update from .zip file on SD card>Toggle signature verification
M
m.kochan10
Guest
Dude, you have stock recovery. Flash CWM! You'll find a sticky guide on the top of list in this section.
Follow the below link and flash CWM recovery
http://xdaforums.com/showthread.php?t=1406541
The recovery you have in your device is native device android recovery(stock recovery); that comes inbuilt with you ROM.
You have to flash a more advanced and flexible recovery called CWM(clock work mod) recovery, to start flashing kernel/stockroms and nandroid backups.
http://xdaforums.com/showthread.php?t=1406541
http://xdaforums.com/showthread.php?t=1406541
The recovery you have in your device is native device android recovery(stock recovery); that comes inbuilt with you ROM.
You have to flash a more advanced and flexible recovery called CWM(clock work mod) recovery, to start flashing kernel/stockroms and nandroid backups.
http://xdaforums.com/showthread.php?t=1406541
M
m.kochan10
Guest
1) flash cwm via Odin
2) flash ardardat's kernel via cwm
Sent from my GT-I9103 using xda premium
2) flash ardardat's kernel via cwm
Sent from my GT-I9103 using xda premium
To those who are brave enough,
not fear of bricking, exploding, blasting, blablabla....
Anyone willing to test out my newest v1.6 kernel that support NTFS/CIFS with performance increase & ipv6 disabled?
Please PM me and I will send the link to you for testing
Last edited:
CallMeVentus
Senior Member
To those who are brave enough,
not fear of bricking, exploding, blasting, blablabla....
Anyone willing to test out my newest v1.6 kernel that support NTFS/CIFS with performance increase & ipv6 disabled?
Please PM me and I will send the link to you for testing
Woaaaaaaaahhhhhhhh that's godly fast
Herpderp Defy.
emanoj.i9103
Senior Member
To those who are brave enough,
not fear of bricking, exploding, blasting, blablabla....
Anyone willing to test out my newest v1.6 kernel that support NTFS/CIFS with performance increase & ipv6 disabled?
Please PM me and I will send the link to you for testing
That's Amazingly Fast...
To those who are brave enough,
not fear of bricking, exploding, blasting, blablabla....
Anyone willing to test out my newest v1.6 kernel that support NTFS/CIFS with performance increase & ipv6 disabled?
Please PM me and I will send the link to you for testing
PM me too my bro!!
I hope 1.6 is much better.. coz after applied your 1.5 from 1.3a
i'm having laggy after few hours of use. but after reboot it back to normal.
but it is not everyday laggy.. only after using heavy load of app.
emanoj.i9103
Senior Member
I`m lucky to get a chance to test 1.61b version of kernel. Have been with it for nearly 6 hours, No freezes, no lags. As stable as 1.5 is. Overclocked to 1.2 GHz and its stable. Phone isn`t warming up even when charging. It used to warm a little with 1.5. Yet to check out NTFS support.
Inshort, Great job ardatdat.
Sent from my Galaxy Royale using Tapatalk
Inshort, Great job ardatdat.
Sent from my Galaxy Royale using Tapatalk
Last edited:
set cpu profile
please any one tell me a perfect profile and frequency for good performance and battery too.......... is any harm to set it performance profile on 1000 frequency.............??????????
please any one tell me a perfect profile and frequency for good performance and battery too.......... is any harm to set it performance profile on 1000 frequency.............??????????
of coz it is OK dude.. 1000mhz@1Ghz is the default speed
/facepalm
but i set it in performance profile....... is it ok
Of course not! Performance keeps your CPU all the time at 1GHz and while the CPU doesn't care about this, your battery does!
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
40Happy New Year of Dragon !!!
The first wonderful kernel for Galaxy R in the year of dragon comes out now!
Change log in v1.5:
- Remove lagfree governor as it seems to cause some laggy behavior
- Put back 608Mhz frequency
- Increase stability & improve smoothness by reverting some commits in v1.4
- No worry, keep the 3G/wifi counter fix!
(v1.5 is a quick fix for v1.4 and if you have already flashed v1.4, please skip it and jump directly to v1.5. Thanks)
Change log in v1.4:
- 3G counter fix: fix the 3G counter problem. Now you can measure the data in/out using your favorite software! (e.g. 3G watchdog)
- Add support to load any scripts located in /system/etc/init.d/ upon booting the device
- Patch up to the newest ZCLA1 kernel source as released by Samsung open source
- Allow more finely control on the brightness level (you will feel it when you slide to control your brightness)
- Add a new frequency: 960Mhz (it is good for daily use)
- Remove the frequency: 608Mhz
- Added new lagfree CPU governor (You can now turn off 'profile' in SetCPU and use the lagfree governor)
- Use the optimized Linaro ARM Cross toolchain for compilation
- Added the VR I/O Scheduler (make default)
- Enable SWAP support
- Cherry picks several commits from CyanogenMod LGE star kernel
- Makefile optimization
- Compatible with almost any android version 2.3.4/2.3.5/2.3.6
*** Noticed that after flashing this version, your screen brightness will go dimmer.
But now, you can fine tune the brightness level in the brightness setting.
Just slide through the brightness control bar and you will feel the different. ***
The introduction of lagfree governor is funny here. It will go up to the max freq. easily, but it will go down very slowly in nearly every 10 seconds. The purpose is to reduce the number of changing in frequencies. To make good use of it, disable any 'profile' in SetCPU. If you don't like the lagfree governor, just use back the 'interactive' one.
Special thanks to: CyanogenMod, intersectRaven, pershoot, faux123 for their kernels and references.
If you have press 'thanks' in the first post, you can say it again in the post #2
Download link
==========
Updated: 2012-02-05 (13:00GMT)
Version: 1.5
Flash method: CWM Recovery
File: ardatdat_9103_kernel_v1.5.zip
Link: http://www.mediafire.com/?kks71xi0jm79jf4
Mirror (115): http://115.com/file/be2ssp9v
MD5: 89A4AB82DCD441224B629EBEE19D47FD
Updated: 2012-01-30 (16:00GMT)
Version: 1.4 (temporary take down)
Flash method: CWM Recovery
File: ardatdat_9103_kernel_v1.3A.zip
Link: http://www.mediafire.com/?mgc0cp1g84n7l7a
Mirror: (suspended)
Updated at 2012-02-05:
v1.4 have caused some laggy issues on some machines. I am going to take down the v1.4. Please wait for my next version v1.5. Stay tuned!
Finally, flashing any kernels or ROMs have risks! Flash them at your own risk!
==========
13Old version:
==============================================================================
Happy New Year 2012 !!!
As the new kernel is flashed using CWM Recovery, I make a new thread here for it.
The new kernel, based from ZSKK5 is compiled. I make it flash-able by CWM recovery. So, you must install CWM in order to flash this kernel. (Guide: http://xdaforums.com/showthread.php?t=1406541 Thanks s4sixty & legion1911.).
Below are the details of the kernel:
Features
=======
- For Samsung Galaxy R (i9103) only
- Based on Samsung open source, ZSKK5 kernel
- Now support auto-rotate in ZSKK5 ROM
- Added new frequencies: 1200 & 1350Mhz
- Setting of max 1350Mhz through SetCPU
- All stock frequencies are untouched: 216-1000Mhz
- Limit the boot up frequencies to be 216-1000 to avoid unstable boot up
- SetCPU voltage adjustments
- Interactive governor patches
- Add autogroup scheduling feature: automated per session task groups
- Simple IO Scheduler (make default)
- 2.6.36.4 patches
- Speed up framebuffer copy
- memory copy macros and functions fine tune
- Misc. kernel fixes
- Rooted (embedded su & Superuser.apk)
Download link
==========
(No autogroup scheduling) (Seems more stable)
Updated: 2011-12-30 (17:00GMT)
Version: 1.3A
Flash method: CWM Recovery
File: ardatdat_9103_kernel_v1.3A.zip
Link: http://www.mediafire.com/?mgc0cp1g84n7l7a
Mirror: http://115.com/file/dplez6q2#ardatdat_9103_kernel_v1.3A.zip
MD5: BE77435BDD64FC24F955AB54124F764A
ODIN3 flash-able package: http://www.mediafire.com/?1plgigintn7crp1
Updated: 2011-12-30 (11:00GMT)
Version: 1.3
Flash method: CWM Recovery
File: ardatdat_9103_kernel_v1.3.zip
Link: http://www.mediafire.com/?zgtbi38pw0z03h2
Mirror: http://115.com/file/c24tjvg6#ardatdat_i9103_kernel_v1.3.zip
MD5: B9080E36CAD650B6FC1E9AAA57743853
Previous Version
============
You can refer this post for the previous version: http://xdaforums.com/showthread.php?t=1348857
*** I will keep updating this kernel to make it better and better ***
*** Finally, flash at your own risk ***
Tell me if you need a Odin3 flash-able package.7Update version: v1.4 in post #1
Go and get it
This time, 3G counter problem is finally fixed in this version! You can measure your 3G/Wifi usage now!
Also, just place any custom scripts in /system/etc/init.d/ folder (make one if you do not have it) and the kernel will execute the scripts every boot up!
Now, you can finely tune your brightness level. It is done by lowering the sensitivity from the first 80% of the slide. Try it.
Now, swap is enabled, so you can make your own swap file and use swapon to increase your memory.
More and more included in this version. Please go and try it6+1
The Optimus 2x and G2x kernels have a lot of features that could boost the performance and battery by leaps and bounds.
I really wish that you incorporating those features. Will be very helpful.
I understand that this kernel was stripped of some features to attain stability. But please try to bring them back by fixing the bugs.
Thanks for this release.
Yes, totally understand that.
For being a responsible guy and the dev for this kernel, I would sacrifice little performance for stability. I think all of you would agree on it.
Furthermore, I haven't revert 'all' commits. I just remove suspected commits. The performance diff should not be so significant. I would investigate and test more before putting them back in future versions. Thanks all for your support6
