Same here, very stable with Tytung kernel R12.4
Im using 2.8.7 and swap + ex4, kefir kernel the rom is very stable for me.
The only problem is that no statusbar bug
What is wrong with you man?Just my opinion...
Over the last couple of weeks it seems this roms focus has gone from been the best "fast and daily usable" rom to a tweakers heaven for who can get the best quadrant score or how fast we can linpack.
Who cares?
When I am at work I believe what's important is the phone be...
A. Stable, not missing calls or people asking me to shout because they either can't hear me or they hear their own echo.
B. Stable, it's Extremely inconvenient today for my phone to reboot in the middle of a phone call with IBM support.
C. Quick but NOT at the expense of stability or raising a risky possibility of instability.
Historically this rom was stable, very stable.
Last few weeks it has gone down hill, right around the time kefir kernel was made default and this ridiculous need to make it faster and faster.
Why do we need this, the phone is only as fast as it allows us to actually get to what we are trying to achieve... If the phone crashes or does strange things like my phone was then all that speed is USELESS.
I'm over it.
I can't keep spending endless hours trying to catch bugs and logcat them, I can't keep wasting time infront of customers computers because it decided to force close the phone app or freeze up for 30 seconds while it decides whether it's going to let me into evernote , oh or better yet the latest new bug I got on Monday was lockup and cold reset answering calls, it stopped by flashing tytung kernel. God knows who was trying to call me since it was an unknown number and they did not leave a message. How inconvenient.
Basically the rom is nothing more to me than a liability in my job.
Stop thinking of pointless benchmarks and start thinking of useful improvements such as oc daemon and bug fixes instead.
I made sure it is this rom, using a giant rom like Runnymede sense 3.5 today and not one problem all day, not as fast but STABLE and that's what counts.
Disclaimer: The above is just an opinion and does not necessarily reflect the quality of Dorimanxs work.
Thankyou.
What is wrong with you man?
This is not an opinion but a rant.
"ridiculous need to make it faster and faster"...Who cares of speed? I care! And I'm not the only one... I'm with dorimanx's roms because I'm looking for the fastest rom ever! staility is my second task and oblviously when you make some system change you need to test and fix after!
Its unacceptable stifling the work of a person who spends hours and hours of his life to give us a phone as fast as ever.
But the point is not that. The point is that when you express an opinion you always must respect others opinion and work (xda rule).
when you read that all data will be moved on ext (the same thing that you boast of having first suggested!!), you can't really imagine that you may experience instability and problems?
Let other to flash first and then evaluate if you should upgrade is a solution for all your "problems"...
A nandroid backup is an alternative solution...
I really do not understand.
How you cannot understand and respect the work dorimanx does for all of us?
If you don't ike this rom or the chef strategy, simply switch to another one or make by yourself your own rom!
I frequently get the impression that you only like pointless polemics...
Don't want to argue with you, but try to respect others "ridiculous" quadrant posts as other do with yours!
++++++1.......If you don't ike this rom or the chef strategy, simply switch to another one or make by yourself your own rom!
Can anyone provide me links to the 2.7 versions? The most stable ones? There is no more from the download servers. Thanks in advance
OK..Ok...ok.....
I heard what you say guy....BuT....uhm...uhm....How can I say..????
This ROM is too F****** faaaAAAAASSSST!!!
...
So i prEfeR keep IT in my Loving HD2
bangorip said:I dont have sufficient posts to do so myself.
It seems to be the ROM-Dorimanx-2.8.7.1-FIX-HIGH-END-ROM.zip that was causing the issue with the market not working for me.
My install combinations below:
1) My tweaked version installed then 2.8.7.1-FIX - Result: Boat browser and Market dont play
2) Original rom then 2.8.7.1-FIX - Result: Boat browser and Market dont play
3)Original rom only - Result: Market and browser work fine
4)My tweaked rom only - Result: Market and browser work fine
Between each attempt I wiped Cache and Dalvik Cache. Give it a go and don't install the fix. Might work for more than just me...
What is wrong with you man?
Let other to flash first and then evaluate if you should upgrade is a solution for all your "problems"...
A nandroid backup is an alternative solution...
I really do not understand.
How you cannot understand and respect the work dorimanx does for all of us?
If you don't ike this rom or the chef strategy, simply switch to another one or make by yourself your own rom!
I frequently get the impression that you only like pointless polemics...
Don't want to argue with you, but try to respect others "ridiculous" quadrant posts as other do with yours!
- GPS LIBS 2.1 NMEA with AGPS Support 5 to 20 second to GPS lock -> Link
- Added GPS Status app to test GPS,BIG Thanks to Tytung
- Camera that make picks with 100% Jpeg quality + Video on "HD" 800x480 6Mbit/s in MPEG4 format! smooth with no delays. 30MB/minute Found It HERE Thanks LeJay!
- Added MIUI Camera v17 Fixed2, for all. (Thanks to MongooseHelix)
- Latest nightly created for BRAVO phone. (Masked as HD2)
- DATA Connection is above 2.5Mbits download! and Radio Auto switch 3G or H according to signal or Idle DATA to save Power!
- TABLET TWEAKS, With big help from Lit
- Cool Skin with ICS 4.0 transition and lot's of nice icons, created by UOT kitchen
- Battery % advance by 1% not by 5% also shows % on charger connected
- Added CRONTAB ability as ADD-ON this will make ROM free of dead file cache and RAM / SWAP cache on different time, Read Page 3 for info.
- Lots of scripts that do kernel tweaking, partition remounting, CPU down-volting, cache rearrange, send marked downloads to RAM-DRIVE and more
- ROM Support Apps2SD! NO NEED To install external scripts!!! all apps will be installed to EXT partition by default, if no EXT exist then to NAND drive!
- ROM now supports DATA To EXT, this mod will move all app data to EXT and speed access to them by 3 times!
- With DATA to EXT quadrant score is 2800+ on light rom, 2600+ on heavy loaded rom.
- ROM has media / video decoder/ encoder drivers that allow loud sound from speaker and smooth video record and play back
- ROM has 2 modes, with swap and without it. (HIGH END / LIGHT) (read more below)
- Added HACKED DPI check Market , now you can download and install any app, by using any density resolution!
- Default CM7 FM Radio
- Ads block in HOSTS file, more than 23500 ads blocked
- Full root with new superuser 3.X already updated to latest SU
- Preinstalled Busybox 1.19.4 ,configured and ready
- CLK Ril_Wrapper 4 installed to fix the connection problem
- Added GTALK 1.3 with voice / video support
- Added latest Google Apps limited pack, only needed apps
- DATA / WIFI / GPS / AUTO DIM LIGHTS and blink lights Fixed LIB!
- Working WIFI Tethering app > Barnacle Wifi Tether (Found by Rudyfastcat )
- MMS blurry pics fix for T-Mobile US users by Tytung! > HERE
- Dorimanx-Kernel made by me (kernel thread)
- ZRAM support (compcache)
- Aroma Installer Menu, that will guide you on installation!
- Flash the CWM partition layout from Mirrors,
- Do a backup of SD card,format it and create a SDext and swap(256Mb)
- Flash “Dorimanx-Rom-X.X.X-Nightly-XXX-All-in-One !!
- Everything will be done by my scripts and ROM
- Boot and restore all your stuff and customize it to your personal wishes.
- Make a backup via recovery after all to have a backup if you do something bad later.
su -
sh /sdcard/sdswap200.sh
OR
sh /sdcard/dataswap250.sh
[B]
Upper = (this is changing automatically when you set all the rest)[/B] [B]
Lower Upper Screen Buttons[/B] [B]
0 14 25 255[/B] [B]
15 149 40 255[/B] [B]
150 224 50 255[/B] [B]
225 499 70 0[/B] [B]
500 999 80 0[/B] [B]
1000 2999 100 0[/B] [B]
3000 INFINITY 250 0 (this is the max level)[/B]
#!/system/bin/bash
# Created by Dorimanx
echo 1 > /sys/devices/platform/leds-microp/leds/amber/brightness
L="log -p i -t cm"
$L "Welcome to Android `getprop ro.build.version.release` / `getprop ro.modversion`";
$L " ";
$L " DORIMANX SUPER FAST AND TWEAKED TO THE MAX ROM ";
$L " ";
$L " ";
stop
#creating debug log for admin.
echo "creating debug log for admin at /data/mountall-script-debug.sh"
echo "new boot" > /data/mountall-script-debug.sh
echo "Pre BOOT Start" >> /data/mountall-script-debug.sh
date >> /data/mountall-script-debug.sh
##############################################################################################################################################
Enable-EXT-check-and-repair-and-speedUP () {
echo "Repairing ext file system and speeding access"
echo "Repairing ext file system and speeding access" >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p2 ]; then
echo "Ext file system found..."
echo "Setting journal_data_writeback on sd-ext partition to speed the access"
cat /proc/mounts > /etc/mtab
echo "Converting EXT3 to EXT4 if not done yet by user if done then ignore"
echo "Converting EXT3 to EXT4 if not done yet by user if done then ignore" >> /data/mountall-script-debug.sh
tune2fs -O extents,uninit_bg,dir_index /dev/block/mmcblk0p2
echo "Convert is DONE, you have EXT4 NOW"
echo "Convert is DONE, you have EXT4 NOW" >> /data/mountall-script-debug.sh
tune2fs -o journal_data_writeback /dev/block/mmcblk0p2
tune2fs -m2 /dev/block/mmcblk0p2
echo "e2fsck running"
e2fsck -vyf /dev/block/mmcblk0p2
tune2fs -l /dev/block/mmcblk0p2
tune2fs -r 2048 /dev/block/mmcblk0p2
estatus=$?
if [ $estatus -gt 0 ]
then
echo "One or more errors were found in your ext4 partition"
echo "One or more errors were found in your ext4 partition" >> /data/mountall-script-debug.sh
if [ $estatus -eq 1 ]
then
echo "File system errors were corrected successfully"
echo "File system errors were corrected successfully" >> /data/mountall-script-debug.sh
elif [ $estatus -eq 2 ]
then
echo "Serious file system errors were found and corrected successfully"
echo "Serious file system errors were found and corrected successfully" >> /data/mountall-script-debug.sh
elif [ $estatus -eq 4 ]
then
echo "Serious file system errors were found and COULD NOT BE FULLY CORRECTED"
echo "Serious file system errors were found and COULD NOT BE FULLY CORRECTED" >> /data/mountall-script-debug.sh
else
echo "e2fsck has encountered technical errors and cannot continue. Script will ABORT"
echo "e2fsck has encountered technical errors and cannot continue. Script will ABORT" >> /data/mountall-script-debug.sh
fi
#statexit=1
else
#statexit=0
echo "Your ext file system was checked and was clean..No repair was necessary."
echo "Your ext file system was checked and was clean..No repair was necessary." >> /data/mountall-script-debug.sh
fi
else
echo "No Ext file system found...Skipping"
echo "No Ext file system found...Skipping" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON
Enable-EXT-check-and-repair-and-speedUP
##############################################################################################################################################
Check-FAT-Partition-and-repair () {
echo "Repairing SDCARD FAT Partition"
echo "Repairing SDCARD FAT Partition" >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p1 ]
then
echo "Sdcard found.."
echo "Sdcard found.." >> /data/mountall-script-debug.sh
mount -t vfat /dev/block/vold/179:1 /mnt/sdcard
echo "DosFsck running..."
fsck_msdos -p -f /dev/block/mmcblk0p1
dosstatus=$?
if [ $dosstatus -gt 0 ]
then
echo "One or more errors were found in your Fat32 partition"
echo "One or more errors were found in your Fat32 partition" >> /data/mountall-script-debug.sh
if [ $dosstatus -eq 1 ]
then
echo "File system errors were corrected successfully"
echo "File system errors were corrected successfully" >> /data/mountall-script-debug.sh
elif [ $dosstatus -eq 2 ]
then
echo "Serious file system errors were found and corrected successfully"
echo "Serious file system errors were found and corrected successfully" >> /data/mountall-script-debug.sh
else
echo "dosfsck has encountered technical errors and cannot continue. Script will ABORT"
echo "dosfsck has encountered technical errors and cannot continue. Script will ABORT" >> /data/mountall-script-debug.sh
fi
else
echo "Your Fat32 file system was checked and was clean..No repair was necessary."
echo "Your Fat32 file system was checked and was clean..No repair was necessary." >> /data/mountall-script-debug.sh
fi
else
echo "Your Fat32 file system could not be read Script will abort"
echo "Your Fat32 file system could not be read Script will abort" >> /data/mountall-script-debug.sh
fi
umount -l /mnt/sdcard
}
############################################
#Trigger, without # =ON with #OFF default=ON
#Check-FAT-Partition-and-repair
##############################################################################################################################################
Find-and-Mount-SD-EXT-and-SpeedUP () {
BB="logwrapper busybox";
echo "find SD Card"
for MMC_NUM in `seq 0 9`;
do
MMC_TYPE=`cat /sys/block/mmcblk$MMC_NUM/device/type`
if [ "$MMC_TYPE" = "SD" ];
then
# 2nd partition of sdcard should be the sd-ext if exist
SD_EXT_PART=/dev/block/mmcblk${MMC_NUM}p2
break
fi
done
if [ -b "$SD_EXT_PART" ];
then
log -p i -t mountsd "Mounting EXT filesystem..";
echo "Mounting EXT filesystem.." >> /data/mountall-script-debug.sh
echo "mount and set perms"
$BB mount -o rw,nobh,barrier=0,noatime,nodiratime,data=writeback,nosuid,nodev,nobh,nouser_xattr,noauto_da_alloc,commit=60,inode_readahead_blks=1,delalloc $SD_EXT_PART /sd-ext;
######################
#backup config for tests.
#$BB mount -o rw,nobh,barrier=0,noatime,nodiratime,data=writeback,nosuid,nodev,nobh,nouser_xattr,noauto_da_alloc,commit=240,journal_async_commit,inode_readahead_blks=1,delalloc $SD_EXT_PART /sd-ext;
######################
fi
if [ "$?" = 0 ];
then
$BB chown 1000:1000 /sd-ext;
$BB chmod 777 /sd-ext;
log -p i -t mountsd "sd-ext successfully mounted";
echo "sd-ext successfully mounted" >> /data/mountall-script-debug.sh
else
log -p e -t mountsd "Unable to mount filesystem for /sd-ext";
echo "Unable to mount filesystem for /sd-ext" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON
Find-and-Mount-SD-EXT-and-SpeedUP
##############################################################################################################################################
Enable-Dalvik2SD () {
if [ ! -e /data/dalvik-on-data-now ]; then
echo "Enable Dalvik2SD"
echo "Enable Dalvik2SD" >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p2 ];
then
echo "move dalvik cache from internal memory to sdcard"
echo "move dalvik cache from internal memory to sdcard" >> /data/mountall-script-debug.sh
if [ ! -d /sd-ext/dalvik-cache ];
then
mkdir /sd-ext/dalvik-cache;
busybox chown 1000:1000 /sd-ext/dalvik-cache;
busybox chmod 777 /sd-ext/dalvik-cache;
fi
echo "move dalvik to sd-ext"
echo "move dalvik to sd-ext" >> /data/mountall-script-debug.sh
busybox rm -rf /data/dalvik-cache;
echo "Create BIND to SD-EXT"
echo "Create BIND to SD-EXT" >> /data/mountall-script-debug.sh
mkdir /data/dalvik-cache
mount -o bind /sd-ext/dalvik-cache /data/dalvik-cache
echo "clean up old whiteouts in SD-EXT"
echo "clean up old whiteouts in SD-EXT" >> /data/mountall-script-debug.sh
for i in local misc property system tombstones;
do
if [ -h /sd-ext/$i ];
then rm -rf /sd-ext/$i;
fi
busybox rm -f /sd-ext/app/*.odex
setprop cm.dc2sd.active 1;
echo "+++ dalvik2sd enabled"
echo "+++ dalvik2sd enabled" >> /data/mountall-script-debug.sh
done;
else
echo "NO EXT Partition Detected"
echo "NO EXT Partition Detected" >> /data/mountall-script-debug.sh
fi
DC2SD_ACTIVE=`getprop cm.dc2sd.active`
if [ "$DC2SD_ACTIVE" != 1 ];
then
# replace symlinks with directories so we can boot without sd
rm -rf /data/dalvik-cache;
mkdir /data/dalvik-cache;
busybox chown 1000:1000 /data/dalvik-cache;
busybox chmod 777 /data/dalvik-cache;
fi;
else
echo "YOU HAVE DALVIK MOVED TO NAND DATA"
echo "YOU HAVE DALVIK MOVED TO NAND DATA" >> /data/mountall-script-debug.sh
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON
Enable-Dalvik2SD
##############################################################################################################################################
Apps2SD-Script () {
# Apps2SD using symlinks and bind mounts
# Original Apps2SD script by shade@chemlab.org (cyanogen)
# Adapted for Oxygen ROM by AdamG
# Fixed for slow detection of SD cards by _thalamus and output a bit more debugging info so we can see where problems are arising.
# execute any postinstall script then kill it
enablea2sd () {
echo "mount and set perms"
echo "enablea2sd mount and set perms" >> /data/mountall-script-debug.sh
busybox chown 1000:1000 /sd-ext;
busybox chmod 777 /sd-ext;
echo "move apps from internal memory to sdcard"
echo "move apps from internal memory to sdcard" >> /data/mountall-script-debug.sh
for i in app
do
if [ -h /data/$i ]; then
rm -rf /data/$i
fi;
if [ ! -d /sd-ext/$i ]; then
mkdir /sd-ext/$i;
chown 1000:1000 /sd-ext/$i
fi;
if [ ! -d /data/$i ]; then
mkdir /data/$i
chown 1000:1000 /data/$i
fi;
if [ -d /data/$i ]; then
cp -a /data/$i/* /sd-ext/$i/
rm -f /data/$i/*
mount --bind /sd-ext/$i /data/$i
chown 1000:1000 /sd-ext/$i
chmod 777 /sd-ext/$i -R
fi;
done;
for p in app-private;
do
if [ -h /data/$p ]; then
rm -rf /data/$p
fi;
if [ ! -d /sd-ext/$p ]; then
mkdir /sd-ext/$p;
chown 1000:1000 /sd-ext/$p
fi;
if [ ! -d /data/$p ]; then
mkdir /data/$p
chown 1000:1000 /data/$p
fi;
if [ -d /data/app-private ]; then
cp -a /data/app-private/* /sd-ext/app-private/
rm -f /data/app-private/*
mount --bind /sd-ext/app-private /data/app-private
chown 1000:1000 /sd-ext/app-private
chmod 777 /sd-ext/app-private -R
fi;
done;
busybox chown 1000:1000 /sd-ext/$i;
busybox chmod 777 /sd-ext/$i
# clean up old whiteouts
for i in local misc property system tombstones;
do
if [ -h /sd-ext/$i ]; then
rm -f /sd-ext/$i;
fi
done;
# please don't put odex files in the app directory people
# it causes dexopt to crash when switching builds
busybox rm -f /sd-ext/app/*.odex
setprop oxygen.a2sd.active 1;
echo "sd-ext-ok" > /sd-ext/ext-ok
echo "+++ Apps-to-SD successfully enabled";
echo "+++ Apps-to-SD successfully enabled" >> /data/mountall-script-debug.sh
}
disablea2sd () { # replace symlinks with directories so we can boot without sd
for i in app app-private;
do
if [ -h /data/$i ];
then
rm -rf /data/$i;
mkdir /data/$i;
busybox chown 1000:1000 /data/$i;
busybox chmod 777 /data/$i;
fi;
done;
setprop oxygen.a2sd.active 0;
}
if [ -e /dev/block/mmcblk0p1 ]; # We check for the presence of the FAT partition first to see if the SD has initialised.
then
echo "SD Card has been initialised...checking for ext partition.";
echo "SD Card has been initialised...checking for ext partition."; >> /data/mountall-script-debug.sh
if [ -e /dev/block/mmcblk0p2 ]; # If false, it isn't there so we don't have to sleep the script and delay the boot.
then
enablea2sd;
else
echo "No ext partition present, apps2sd disabled";
echo "No ext partition present, apps2sd disabled" >> /data/mountall-script-debug.sh
disablea2sd;
fi;
else
sleep 4; #Enables time for a slow SD to be detected and populate the device nodes.
if [ -e /dev/block/mmcblk0p2 ];
then
echo "enablea2sd for slow SD card";
echo "enablea2sd for slow SD card" >> /data/mountall-script-debug.sh
enablea2sd;
else
echo "No ext partition present after sleep, apps2sd disabled";
echo "No ext partition present after sleep, apps2sd disabled" >> /data/mountall-script-debug.sh
disablea2sd;
fi;
fi;
sync;
}
############################################
#Trigger, without # =ON with #OFF default=ON warning. do not add # at Apps2SD-Script, if you wish to disable apps2SD then remove # at disablea2sd below.
Apps2SD-Script
############################################
#Trigger, without # =ON with #OFF default=OFF
#disablea2sd
##############################################################################################################################################
#This is in case that ROM looks for dalvik in cache. also fix recovery.
Mount-Dalvik-Cache-to-Cache-folder-and-fix-recovery () {
echo "Mounting Dalvik also to cache for ROM in case needed" >> /data/mountall-script-debug.sh
if [ ! -d /cache/dalvik-cache ]; then
mkdir /cache/dalvik-cache
fi
chown 1000:1000 /cache/dalvik-cache
chmod 777 /cache/dalvik-cache
mount -o bind /sd-ext/dalvik-cache /cache/dalvik-cache
if [ ! -d /mnt/cache ]; then
mkdir /mnt/cache
fi
if [ ! -d /mnt/cache/recovery ]; then
mkdir /mnt/cache/recovery
fi
chmod 777 /mnt/cache/recovery
if [ -h /cache/recovery ]; then
rm -rf /cache/recovery
mkdir /cache/recovery
chown 1000:2001 /cache/recovery
chmod 777 /cache/recovery
fi
}
############################################
#Trigger, without # =ON with #OFF default=ON
Mount-Dalvik-Cache-to-Cache-folder-and-fix-recovery
##############################################################################################################################################
#This script will check if your EXT has more than 250MB free before DATA move. if no room data will remain in NAND data partition.
#If found 250mb FREE on EXT then you will see light blink. = GREEN ON/OF - RED ON/OFF - GREEN ON/OF - RED ON and OFF when data transfered.
Check-and-move-DATA-To-EXT () {
if [ -e /sd-ext/ext-ok ]; then
echo "checking if you have more than 250MB free on EXT before DATA move." >> /data/mountall-script-debug.sh
echo "checking if you have more than 250MB free on EXT before DATA move."
EXTSIZE=$(df -k /sd-ext | tail -n1 | tr -s ' ' | cut -d ' ' -f4)
if [ $EXTSIZE -gt 250000 ]; then
echo "Cool You have more than 250MB free on EXT partition moving data to EXT"
echo "Cool You have more than 250MB free on EXT partition moving data to EXT" >> /data/mountall-script-debug.sh
sync
sysctl -p
if [ ! -d /sd-ext/data ]; then
mkdir /sd-ext/data
chmod 777 /sd-ext/data
chown 1000:1000 /sd-ext/data
fi
if [ ! -d /data/data ]; then
mkdir /data/data
chmod 777 /data/data
chown 1000:1000 /data/data
fi
echo "Copy Data to EXT" >> /data/mountall-script-debug.sh
echo "Copy Data to EXT"
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cd /data/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data/* /sd-ext/data/ 2> /dev/null
echo "data moved OK" > /data/data-on-ext-now
echo "GOOD data moved OK"
echo "GOOD data moved OK" >> /data/mountall-script-debug.sh
chmod 444 /data/data-on-ext-now
else
echo "YOU DONT HAVE ROOM FOR DATA ON EXT PARTITION YOU NEED 250MB FREE"
echo "YOU DONT HAVE ROOM FOR DATA ON EXT PARTITION YOU NEED 250MB FREE" >> /data/mountall-script-debug.sh
fi
fi
}
if [ -e /data/data-on-ext-now ]; then
echo "Activating DATA BIND from EXT to DATA"
echo "Activating DATA BIND from EXT to DATA" >> /data/mountall-script-debug.sh
rm -rf /data/data/* 2> /dev/null
mount --bind /sd-ext/data /data/data
echo "You moved the DATA to EXT All OK"
echo "You moved the DATA to EXT All OK" >> /data/mountall-script-debug.sh
sync
sysctl -p
fi
############################################
#Trigger, without # =ON with #OFF default=OFF
#Check-and-move-DATA-To-EXT
##############################################################################################################################################
#Remount Debug to NONE to reduce resource drain.
if [ -e /sys/kernel/debug ]; then
umount /sys/kernel/debug
mount -t debugfs none /sys/kernel/debug
fi
##############################################################################################################################################
#This mod will move system + user APPS + DATA to NAND in case that DATA was moved to EXT!
Mod2-Update () {
if [ -e /sd-ext/ext-ok ]; then
if [ -e /data/data-on-ext-now ]; then
echo "Moving NEW user data to nand to release the SDCARD for RAM Services"
echo "Moving NEW user data to nand to release the SDCARD for RAM Services" >> /data/mountall-script-debug.sh
DATASIZE=$(df -k /data | tail -n1 | tr -s ' ' | cut -d ' ' -f4)
if [ $DATASIZE -gt 70000 ]; then
if [ ! -d /data/data-nand ]; then
mkdir /data/data-nand
chown 1000:1000 /data/data-nand
chmod 777 /data/data-nand
fi
#####################################################################
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
#Dorimanx added apps data, new and old.
cp -a com.protocol.x.USB /data/data-nand/ 2> /dev/null
cp -a com.innowebtech.g0t0 /data/data-nand/ 2> /dev/null
cp -a xxbcn.AllAppsOrganizerPlusB /data/data-nand/ 2> /dev/null
cp -a com.fede.launcher /data/data-nand/ 2> /dev/null
cp -a com.nitrodesk.droid20.nitroid /data/data-nand/ 2> /dev/null
cp -a net.xdevelop.rotator* /data/data-nand 2> /dev/null
cp -a com.rechild.advancedtaskkille* /data/data-nand 2> /dev/null
cp -a com.quoord.tapatalk* /data/data-nand 2> /dev/null
cp -a ccc71.bmw.pro /data/data-nand 2> /dev/null
cp -a ccc71.pmw.pro /data/data-nand 2> /dev/null
cp -a com.sebastian.seal /data/data-nand 2> /dev/null
cp -a org.adwfreak.launcher /data/data-nand 2> /dev/null
cp -a net.dinglisch.android.taskerm* /data/data-nand 2> /dev/null
cp -a mobi.mgeek.TunnyBrowser* /data/data-nand 2> /dev/null
cp -a net.rgruet.android.g3watchdog* /data/data-nand 2> /dev/null
cp -a com.dropbox.android* /data/data-nand 2> /dev/null
cp -a com.keramidas.titaniumbackup* /data/data-nand 2> /dev/null
cp -a de.shapeservices.implus* /data/data-nand 2> /dev/null
cp -a uk.co.blueNotify* /data/data-nand 2> /dev/null
cp -a com.handcent.nextsms* /data/data-nand 2> /dev/null
cp -a com.handcent.lang.nextsms* /data/data-nand 2> /dev/null
cp -a com.adobe.flashplayer* /data/data-nand 2> /dev/null
cp -a com.dooblou.WiFiFileExplorer* /data/data-nand 2> /dev/null
cp -a com.maxmpz.audioplayer* /data/data-nand 2> /dev/null
cp -a com.opera.browser* /data/data-nand 2> /dev/null
cp -a com.qs.enhancedemail* /data/data-nand 2> /dev/null
cp -a com.tomanyz.lockWatch* /data/data-nand 2> /dev/null
cp -a com.snapwood.smugfolio* /data/data-nand 2> /dev/null
cp -a com.whatsapp* /data/data-nand 2> /dev/null
cp -a com.infonetservice.phono* /data/data-nand 2> /dev/null
cp -a se.catharsis.android.calendar* /data/data-nand 2> /dev/null
cp -a org.uguess.android.sysinfo.* /data/data-nand 2> /dev/null
cp -a com.alienmanfc6.wheresmydroid* /data/data-nand 2> /dev/null
cp -a com.snowbee.colorize* /data/data-nand 2> /dev/null
cp -a com.netqin.mobileguard* /data/data-nand 2> /dev/null
cp -a org.zeam* /data/data-nand 2> /dev/null
cp -a com.Amazon.kindle* /data/data-nand 2> /dev/null
cp -a com.ebay.mobile* /data/data-nand 2> /dev/null
cp -a com.imdb.mobile* /data/data-nand 2> /dev/null
cp -a org.iii.romulus.meridian* /data/data-nand 2> /dev/null
cp -a com.speedsoftware.rootexplorer* /data/data-nand 2> /dev/null
cp -a hk.suiaing.android.lock.screenlock* /data/data-nand 2> /dev/null
cp -a nextapp.systempanel* /data/data-nand 2> /dev/null
cp -a com.facebook.katana* /data/data-nand 2> /dev/null
cp -a com.abcOrganizer.* /data/data-nand 2> /dev/null
cp -a com.mediawoz.goweather* /data/data-nand 2> /dev/null
cp -a org.gpo.greenpower* /data/data-nand 2> /dev/null
cp -a com.zegoggles.smssync* /data/data-nand 2> /dev/null
cp -a com.swype.android.inputmethod* /data/data-nand 2> /dev/null
cp -a com.it.braincrash.volumeace* /data/data-nand 2> /dev/null
cp -a com.alk.copilot.eumarket.* /data/data-nand 2> /dev/null
cp -a com.sirma.mobile.bible.android* /data/data-nand 2> /dev/null
cp -a com.bt.android.elixir* /data/data-nand 2> /dev/null
cp -a de.stohelit.folderplayer* /data/data-nand 2> /dev/null
cp -a com.osa.android.navdroyd* /data/data-nand 2> /dev/null
cp -a com.carl.tc* /data/data-nand 2> /dev/null
cp -a com.gau.go.* /data/data-nand 2> /dev/null
##########################################################################################################
#User apps data
#Add here you custome apps. use example, cp -a YOUR APP DATA FOLDER /data/data-nand 2> /dev/null
#After you finish adding, REBOOT. your app data will be moved to NAND and files in sd-ext will be deleted.
##########################################################################################################
echo "NEW-data-nand-migrated" >> /data/mountall-script-debug.sh
##########################################################################################################
DATAEXTDELETE=`ls /data/data-nand`;
for c in $DATAEXTDELETE
do
rm -rf /sd-ext/data/$c
done
echo "data-nand-migrated" > /data/data-nand-migrated
#Mount data to /data/data
ln -s /data/data-nand/* /sd-ext/data/
#done
echo "DATA of Migrated to NAND Apps, deleted from sd-ext."
echo "DATA of Migrated to NAND Apps, deleted from sd-ext." >> /data/mountall-script-debug.sh
echo "System DATA and limited app DATA Mounted."
echo "System DATA and limited app DATA Mounted." >> /data/mountall-script-debug.sh
cd /
else
echo "Your data partiotion dont have 70MB FREE for SYSTEM NAND MOD"
echo "Your data partiotion dont have 70MB FREE for SYSTEM NAND MOD" >> /data/mountall-script-debug.sh
fi
else
echo "You didnt moved DATA TO EXT with MOD #1, you cant use MOD #2, first move all data to EXT"
echo "You didnt moved DATA TO EXT with MOD #1, you cant use MOD #2, first move all data to EXT" >> /data/mountall-script-debug.sh
fi
fi
}
##############################################
#Trigger, without # =ON with #OFF default=ON
#This is the MOD #2 Moving NEW DATA for system to use them from NAND to speedup.
#Mod2-Update
##############################################################################################################################################
BOOT-UP-FIX () {
if [ -e /sd-ext/ext-ok ]; then
if [ -e /data/first-boot ]; then
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data-nand/* /sd-ext/data 2> /dev/null
rm -rf /data/data-nand/* 2> /dev/null
rm -f /data/first-boot 2> /dev/null
echo "dalvik-cache" > /sd-ext/dalvik-cache/cache-ok
fi
fi
}
##############################################
#Trigger, without # =ON with #OFF default=ON
BOOT-UP-FIX
##############################################################################################################################################
DALVIK-CACHE-FIX () {
if [ -e /sd-ext/ext-ok ]; then
if [ ! -e /sd-ext/dalvik-cache/cache-ok ]; then
cd /sd-ext/data
find . ! -name . -prune -type l -exec rm {} \;
cp -a /data/data-nand/* /sd-ext/data 2> /dev/null
rm -rf /data/data-nand/* 2> /dev/null
echo "dalvik-cache" > /sd-ext/dalvik-cache/cache-ok
fi
fi
}
##############################################
#Trigger, without # =ON with #OFF default=ON
DALVIK-CACHE-FIX
##############################################################################################################################################
echo "Fixing System Owners"
busybox chown 0:2000 /system/etc/init.d/*
busybox chown 0:0 /cache
busybox chown 1000:2001 /cache/recovery
busybox chown 1000:1000 /cache/dalvik-cache
busybox chown 1000:2001 /cache/recovery
busybox chown 1000:1000 /dev/smd27
busybox chown 0:0 /dev
busybox chown 0:0 /system/lib/*
busybox chown 0:0 /system/lib/hw/*
busybox chown 0:2000 /dev/cpu_dma_latency
echo "Fixing System permissions"
busybox chmod 777 /dev/smd27
busybox chmod 755 /dev
busybox chmod 777 /dev/cpu_dma_latency
busybox chmod 755 /system/etc/init.d/*
busybox chmod 644 /system/etc/gps.conf
busybox chmod 644 /system/etc/hosts
busybox chmod 644 /system/etc/sysctl.conf
busybox chmod 777 /system/lib/*
busybox chmod 777 /system/lib/hw/*
busybox chmod 755 /system/lib/egl/*
busybox chmod 644 /system/build.prop
busybox chmod 777 /cache/ -R
echo "DONE"
##############################################################################################################################################
#This will copy the SU to xbin also and remove the simlink
CopyRoot () {
#Checking and fixing ROOT
rm -rf /system/xbin/su
cp /system/bin/su /system/xbin/
chmod 6777 /system/xbin/su
chown 0:0 /system/xbin/su
#Done
}
############################################
#Trigger, without # =ON with #OFF default=ON
CopyRoot
##############################################################################################################################################
#This is ZIP Align Script. it's will fix all the apps in /system/app and in /sd-ext/app every boot, already alinged apps will not be checked again.
#Temp dir is on SDCARD to give all big apps a chance to be fixed.
ZIPALIGN () {
echo "Activating zipalign for all apps"
echo "Activating zipalign for all apps" >> /data/mountall-script-debug.sh
LOG_FILE=/data/zipalign.log
ZIPALIGNDB=/data/zipalign.dba
SYSTEM=$(mount|grep "/system "|awk '{ print $1 }')
[ -e $LOG_FILE ] && rm $LOG_FILE
[ -f $ZIPALIGNDB ] || touch $ZIPALIGNDB
MissingApps=`cat /data/zipalign.dba | grep eu.chainfire.cf3d`
if [ $MissingApps !=eu.chainfire.cf3d ]; then
echo "/data/app/eu.chainfire.cf3d-1.apk" >> /data/zipalign.dba
echo "adding Missing APPS"
else
echo "Missing Apps Already Added"
fi
echo "Starting Dorimanx Automatic ZipAlign $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE
mount -t vfat /dev/block/vold/179:1 /mnt/sdcard
for DIR in /system/app /data/app ; do
cd $DIR
for APK in *.apk ; do
if [ $APK -ot $ZIPALIGNDB ] && [ $(grep "$DIR/$APK" $ZIPALIGNDB|wc -l) -gt 0 ] ; then
echo "Already checked: $DIR/$APK" | tee -a $LOG_FILE
else
zipalign -c 4 $APK
if [ $? -eq 0 ] ; then
echo "Already aligned: $DIR/$APK" | tee -a $LOG_FILE
grep "$DIR/$APK" $ZIPALIGNDB > /dev/null || echo $DIR/$APK >> $ZIPALIGNDB
else
echo "Now aligning: $DIR/$APK" | tee -a $LOG_FILE
if [ ! -d /mnt/sdcard/zipalign ]; then
mkdir /mnt/sdcard/zipalign
chmod 777 /mnt/sdcard/zipalign
fi
zipalign -f 4 $APK /mnt/sdcard/zipalign/$APK
cp -a /mnt/sdcard/zipalign/$APK $APK
rm -f /mnt/sdcard/zipalign/$APK
chmod 644 /system/app/*
chmod 644 /data/app/*
chown 1000:1000 /system/app/*
chown 1000:1000 /data/app/*
grep "$DIR/$APK" $ZIPALIGNDB > /dev/null || echo $DIR/$APK >> $ZIPALIGNDB
fi
fi
done
done
touch $ZIPALIGNDB
umount /mnt/sdcard
echo "Automatic ZipAlign finished at $( date +"%m-%d-%Y %H:%M:%S" )" | tee -a $LOG_FILE
echo "Automatic ZipAlign finished" >> /data/mountall-script-debug.sh
}
############################################
#Trigger, without # =ON with #OFF default=ON
ZIPALIGN
##############################################################################################################################################
echo "Writing debug info for dorimanx support. file name /data/mountall-script-debug.sh, post it if you have problems"
if [ -d /sd-ext/data ] && [ -e /data/data-on-ext-now ]; then
echo "DATA IS ON EXT MOD #1 ONLINE" >> /data/mountall-script-debug.sh
else
echo "DATA IS ON NAND, MOD #1 is OFFLINE" >> /data/mountall-script-debug.sh
fi
if [ -e /data/data-nand-migrated ]; then
echo "System DATA and Choosen DATA migrated to NAND, MOD #2 ONLINE" >> /data/mountall-script-debug.sh
else
echo "MOD #2 not activated"
fi
echo "Starting the Android Virtual Machine, let the HIGH POWER be with you, ROM DEV DORIMANX"
echo "Starting the Android Virtual Machine, let the HIGH POWER be with you, ROM DEV DORIMANX" >> /data/mountall-script-debug.sh
echo "Pre BOOT finish" >> /data/mountall-script-debug.sh
date >> /data/mountall-script-debug.sh
start
# execute any postinstall script then kill it
if [ -e /data/firstboot.sh ];
then
log -p i -t boot "Executing firstboot.sh..";
logwrapper /system/bin/sh /data/firstboot.sh;
rm -f /data/firstboot.sh;
fi;
echo "ALL DONE, END OF FILE"
sleep 2
echo 0 > /sys/devices/platform/leds-microp/leds/amber/brightness
sleep 2
exit 1