D802 .tot/.dz file anyone? :(

Search This thread

Dahaka92

Member
Dec 2, 2011
23
1
Hey guys, ive searched the whole day now and have a serious problem with my LG G2 D802 variant..

I tried to flash Paranoid Android 4.0 with TWRP and there was a never ending boot animation, after that I tried to do a factory reset with the LG Flash tool wich stops at 49%.

Now I'm trying to unbrick it with this tutorial but I can't find the .tot file for the D802.

http://optimusforums.com/threads/guide-complete-guide-to-unbrick-your-soft-bricked-g2-f320.9232/

The thing is, I have extracted the .kdz and it outputs a .dz and a .dll when I'm trying to start the flash progress, there is a popup wich says "Failed PriviousLoad()... :/

Could someone please help me out?

Sidenote: I have access to TWRP but sideload wont work(?) adb lists no devices....
 

dagotal

Member
Mar 27, 2011
5
0
i look for it allso

i look for it allso
i have d802 International but without Recovery,and cannot access to fastboot
only TOT will help me.

Please!!! help us...
 
I think this will help!

i look for it allso
i have d802 International but without Recovery,and cannot access to fastboot
only TOT will help me.

Please!!! help us...

hi i have LG G2 D802 16gb
last week i flashed kitkat rom, but since most of G2 specific apps are lost, i didnot like it and i want to get back to stock.

i get "stuck at %49 error", "page error", "wparam error", ("whatever you call error") all the time while trying to flash d802 stock rom with "R&D tool", i tried on Win8, WinXP..

I changed the USB com port to 4, to 41.. nothing Worked!!!

and at last!..

I ve found a solution...

here it is...

i found the python script, called "KDZFileTools.py" written by someone (called thecubed) in this forum.
thanks him alot!!! and here is the link;
http://xdaforums.com/showthread.php?t=2483250

to make python script file run in Windows go to http://www.python.org and download python 2.7 (NOT 3.x) and install it..

then put .py script file, .kdz file into "c:\python27\" folder (this folder is created default when you install python)
and in command promt type;
python KDZFileTools.py -f D80210B_00.kdz -x
this commands extracts the required .DLL file from .KDZ file, to "c:\python27\kdzextracted" folder, the extracted.dz file is NOT necessary for this tutorial.

and i found a tot file from this link, http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
the one with date: SEP. 7, 2013

i used these two files (DLL i extracted from kdz and tot file) with LG Flashtool v.1.5, you can find it here:
http://xdaforums.com/showthread.php?t=2475045

if you fallow the steps explained here,
http://xdaforums.com/showthread.php?t=2475045
with the DLL (extracted from your phones .KDZ file)
and
.tot file given above

YOU WILL GET STOCK ROM BACK!! i did these and get mine back!!
warning that I'm not responsible for you messing with your phone

hope this helps..

please inform me if you succeed.
 
Last edited:

McIringer

Senior Member
Jun 10, 2012
51
6
.tot file for D80210e_EUR_XX

Are any of .tot files from link above compatible with phone running stock d80210e_eur_xx, so 32Gb version? Or can I just use the one which is for 32Gb version (using .dll from d80210e_eur_xx.kdz and .tot from d80210b_sea_xx) and then use .kdz method with d80210e_eur_xx.kdz to get my carriers official ROM? Thank you in advance!
 
Last edited:

TheChouffy

Member
Mar 10, 2014
6
5
www.chouffy.net
Worked perfectly

hi i have LG G2 D802 16gb
last week i flashed kitkat rom, but since most of G2 specific apps are lost, i didnot like it and i want to get back to stock.

i get "stuck at %49 error", "page error", "wparam error", ("whatever you call error") all the time while trying to flash d802 stock rom with "R&D tool", i tried on Win8, WinXP..

I changed the USB com port to 4, to 41.. nothing Worked!!!

and at last!..

I ve found a solution...

here it is...

i found the python script, called "KDZFileTools.py" written by someone (called thecubed) in this forum.
thanks him alot!!! and here is the link;
http://xdaforums.com/showthread.php?t=2483250

to make python script file run in Windows go to http://www.python.org and download python 2.7 (NOT 3.x) and install it..

then put .py script file, .kdz file into "c:\python27\" folder (this folder is created default when you install python)
and in command promt type;
python KDZFileTools.py -f D80210B_00.kdz -x
this commands extracts the required .DLL file from .KDZ file, to "c:\python27\kdzextracted" folder, the extracted.dz file is NOT necessary for this tutorial.

and i found a tot file from this link, http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
the one with date: SEP. 7, 2013

i used these two files (DLL i extracted from kdz and tot file) with LG Flashtool v.1.5, you can find it here:
http://xdaforums.com/showthread.php?t=2475045

if you fallow the steps explained here,
http://xdaforums.com/showthread.php?t=2475045
with the DLL (extracted from your phones .KDZ file)
and
.tot file given above

YOU WILL GET STOCK ROM BACK!! i did these and get mine back!!
warning that I'm not responsible for you messing with your phone

hope this helps..

please inform me if you succeed.

Thanks man, I had some problems with the LG UpTestEX software, and your method worked perfectly !
I made a successful downgrade with a D802 (4.4.2 Vodaphone to 4.2.2 JDQ39B) :victory:
 

supertrav85

New member
Mar 15, 2014
1
0
When all else failed... this worked.
With correct dll and tot files... this worked a treat.
Thanks for all the work guys :D
 

bidsar.k

Member
Apr 23, 2010
16
0
New Delhi
hi i have LG G2 D802 16gb
last week i flashed kitkat rom, but since most of G2 specific apps are lost, i didnot like it and i want to get back to stock.

i get "stuck at %49 error", "page error", "wparam error", ("whatever you call error") all the time while trying to flash d802 stock rom with "R&D tool", i tried on Win8, WinXP..

I changed the USB com port to 4, to 41.. nothing Worked!!!

and at last!..

I ve found a solution...

here it is...

i found the python script, called "KDZFileTools.py" written by someone (called thecubed) in this forum.
thanks him alot!!! and here is the link;
http://xdaforums.com/showthread.php?t=2483250

to make python script file run in Windows go to http://www.python.org and download python 2.7 (NOT 3.x) and install it..

then put .py script file, .kdz file into "c:\python27" folder (this folder is created default when you install python)
and in command promt type;
python KDZFileTools.py -f D80210B_00.kdz -x
this commands extracts the required .DLL file from .KDZ file, to "c:\python27\kdzextracted" folder, the extracted.dz file is NOT necessary for this tutorial.

and i found a tot file from this link, http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
the one with date: SEP. 7, 2013

i used these two files (DLL i extracted from kdz and tot file) with LG Flashtool v.1.5, you can find it here:
http://xdaforums.com/showthread.php?t=2475045

if you fallow the steps explained here,
http://xdaforums.com/showthread.php?t=2475045
with the DLL (extracted from your phones .KDZ file)
and
.tot file given above

YOU WILL GET STOCK ROM BACK!! i did these and get mine back!!
warning that I'm not responsible for you messing with your phone

hope this helps..

please inform me if you succeed.

Thank you for this great tutorial, I have a query though. The TOT files provided in the link, are they generic? I have the same phone but the 32gb variant. Can i extract the DLL and then flash the 32gb TOT on tmy LG G2 D802 International variant?
 
Thank you for this great tutorial, I have a query though. The TOT files provided in the link, are they generic? I have the same phone but the 32gb variant. Can i extract the DLL and then flash the 32gb TOT on tmy LG G2 D802 International variant?

It was a "bit" long time ago I dont remember exactly what the issue really was. :) But i think "memory variant" wouldnot be important for dll.. give it a try, it should work..
 

bidsar.k

Member
Apr 23, 2010
16
0
New Delhi
It was a "bit" long time ago I dont remember exactly what the issue really was. :) But i think "memory variant" wouldnot be important for dll.. give it a try, it should work..

Thanks for the reply. So should i extract the DLL from the stock KDZ and the flash the 32gb TOT from that link? Are you sure it won't mess things up more?
I badly want to fix this issue or else i would have to pay a hefty amount to my friend. I just want to be sure i dont render it completely dead.
By the way, are those TOTs carrier specific?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    I think this will help!

    i look for it allso
    i have d802 International but without Recovery,and cannot access to fastboot
    only TOT will help me.

    Please!!! help us...

    hi i have LG G2 D802 16gb
    last week i flashed kitkat rom, but since most of G2 specific apps are lost, i didnot like it and i want to get back to stock.

    i get "stuck at %49 error", "page error", "wparam error", ("whatever you call error") all the time while trying to flash d802 stock rom with "R&D tool", i tried on Win8, WinXP..

    I changed the USB com port to 4, to 41.. nothing Worked!!!

    and at last!..

    I ve found a solution...

    here it is...

    i found the python script, called "KDZFileTools.py" written by someone (called thecubed) in this forum.
    thanks him alot!!! and here is the link;
    http://xdaforums.com/showthread.php?t=2483250

    to make python script file run in Windows go to http://www.python.org and download python 2.7 (NOT 3.x) and install it..

    then put .py script file, .kdz file into "c:\python27\" folder (this folder is created default when you install python)
    and in command promt type;
    python KDZFileTools.py -f D80210B_00.kdz -x
    this commands extracts the required .DLL file from .KDZ file, to "c:\python27\kdzextracted" folder, the extracted.dz file is NOT necessary for this tutorial.

    and i found a tot file from this link, http://downloads.codefi.re/autoprime/LG/LG_G2/D802/Stock_Firmware
    the one with date: SEP. 7, 2013

    i used these two files (DLL i extracted from kdz and tot file) with LG Flashtool v.1.5, you can find it here:
    http://xdaforums.com/showthread.php?t=2475045

    if you fallow the steps explained here,
    http://xdaforums.com/showthread.php?t=2475045
    with the DLL (extracted from your phones .KDZ file)
    and
    .tot file given above

    YOU WILL GET STOCK ROM BACK!! i did these and get mine back!!
    warning that I'm not responsible for you messing with your phone

    hope this helps..

    please inform me if you succeed.