OK, I figure it's time to start providing my kernels to the general public.
This should be compatible with most stock-derived Gingerbread firmwares. It is NOT compatible with CM7/MIUI or any other AOSP-derived firmware. It is NOT compatible with ICS and WILL NOT BE until ICS kernel source for the I9100 is released. At that point a new thread will be created for those kernels. I am testing it currently with self-deodexed/debloated/Hellraised XWKL1.
This kernel series is intended to be similar in spirit to my Daily Driver series for the Infuse at http://xdaforums.com/showthread.php?t=1212795
It is built from sources at https://github.com/Entropy512/linux_kernel_sgh-i777/commits/master, and initramfs at https://github.com/Entropy512/initramfs_sgh-i777/commits/master
My general goals are to focus on stability and battery life. If it comes to a tradeoff between performance and the above two, I will choose stability/battery life. In general I will choose stability first, with the exception of undervolting.
Current features:
Planned features, short term:
Planned features, mid-term:
Planned features, long-term:
Features not planned:
Known issues:
(Tested on Linux, not tested MacOS/Windows but should work) Heimdall - Extract the contents of the tar file, enter download mode, and flash with the following command line:
Flashing instructions for .zip releases:
Flash in CWM, or extract the zImage and use the Heimdall instructions above.
Please do not ask how to enter download mode or install Heimdall/Odin in this thread - these are basic generic skills anyone flashing custom firmwares on Samsung devices should know and plenty of documentation exists elsewhere. If you really need to ask, use the General forum, or if created, the Q&A forum. I want to try to keep this thread clean and only with bug reports and issues specific to this release, not general HOWTO or troubleshooting posts. Some of the information you need is in jivy26's FAQs thread at http://xdaforums.com/showthread.php?t=1288112 - Reading at least the first post of this thread in its entirety is STRONGLY recommended.
Bug reports:
If you have a crash (reboot all the way to Galaxy S I9100 screen), use ADB dump the contents of /proc/last_kmsg and post
If you have oddball behavior, include a clearly reproducible test case with your report, or use ADB to obtain a dmesg and logcat capturing the odd behavior at the time of error.
Similar to flashing - using ADB and obtaining last_kmsg, dmesg, and logcat dumps are basic skills that anyone working with custom firmwares on Android devices should have. If you need help with these, do some searching, or post in the General forum or, if created, Q&A forum.
Firmware ("ROM") Developers:
While I cannot restrict anyone from putting this kernel into a ROM as long as links are given to the github sources for GPL compliance, I request that anyone who includes this kernel in a firmware release does the following out of courtesy:
Link to this thread
Clearly indicate in your firmware changelog which Daily Driver kernel release is included in your firmware release whenever you change DD releases - this lets users identify whether a fix is present in the kernel they're using or not
Kernel Developers:
Similar to my request for ROM developers, while I can't restrict you from doing anything, I ask as a courtesy that if you cherry-pick my commits, you do the following:
Please don't rebase my commits into a large multi-feature without consulting me - rebasing related bugfixes together is OK.
Please try not to implement lots of unrelated features or bugfixes in a single git commit - it makes it hard to reimplement that when Samsung drops new sources or releases a new device
ALL OF MY RELEASES ARE NAMED BY RELEASE DATE - MMDDYYYY. See the changelog for differences between Experimental (exp) and non-exp versions for days where dual releases are made.
This should be compatible with most stock-derived Gingerbread firmwares. It is NOT compatible with CM7/MIUI or any other AOSP-derived firmware. It is NOT compatible with ICS and WILL NOT BE until ICS kernel source for the I9100 is released. At that point a new thread will be created for those kernels. I am testing it currently with self-deodexed/debloated/Hellraised XWKL1.
This kernel series is intended to be similar in spirit to my Daily Driver series for the Infuse at http://xdaforums.com/showthread.php?t=1212795
It is built from sources at https://github.com/Entropy512/linux_kernel_sgh-i777/commits/master, and initramfs at https://github.com/Entropy512/initramfs_sgh-i777/commits/master
My general goals are to focus on stability and battery life. If it comes to a tradeoff between performance and the above two, I will choose stability/battery life. In general I will choose stability first, with the exception of undervolting.
Current features:
- codeworkx's cpuidle patch - should improve battery life a bit. In most cases it will likely not improve things much, but in rare cases it will result in significant improvements. (I only have one partially-reproducible test case on the Infuse so far)
- JHash 3
- BFQ I/O scheduler
- CIFS module in initramfs
- CWM 5.0.2.8 pulled from latest CM7 source tree as of 2/28/2012
- "insecure" kernel (meaning root in ADB)
- CPU governor set to Conservative by default to conserve some battery - this will make your device slightly less responsive, use SetCPU or a similar app to return to ondemand if you want it, or reduce the conservative polling interval
- Filesystem readahead tweaks in initramfs
- netarchy's Sleep of Death fix
- netarchy's conservative governor tuning patch - should improve responsiveness of devices when using the conservative governor if you reduce the polling interval (misnamed as sample_rate) - the I9100 community calls this "lionheart" even though it's really only a 2-line patch
- Battery charge current monitoring (CurrentWidget) support - only reports charge current and not discharge, and reports a value 2.85 times the actual current. Use CurrentWidget's "operation on value" to divide by 2.85.
- Miscellaneous bugfixes pulled from Ninphetamine and CM7 sources - see github for details
- /system/etc/init.d support in initramfs - Note that this only runs stuff in /system/etc/init.d - ROM developers or you need to create it. Attached is an example script that will change the CPU frequency governor to ondemand if placed in /system/etc/init.d and set to executable
- Four "use at your own risk" features that trade performance for stability - See Post #4 for details
- Standard bootanimation support
- /proc/last_kmsg crash debugging support
- NFS modules in initramfs - note that they must be insmodded in a specific order: sunrpc.ko, lockd.ko, then nfs.ko
- Fix for fuel_alerted perma-wakelocks
- Fix for wifi tethering on I9100 ROMs that have been Hellraised
- Bump up TCP buffer sizes in initramfs to match that of the Infuse - may help network performance in some cases
- cpuidle driver from Tab 7 Plus kernel - allows entry into AFTR more often
- Support Bluetooth HID on newer firmware bases
- 3-step GPU clock/voltage control
- Extended hotplug tuning
- Support for Xan's ExTweaks universal tuning app - https://market.android.com/details?id=com.darekxan.extweaks.app
Planned features, short term:
- Pull in some improvements from myfluxi and arighi's trees
Planned features, mid-term:
- ????
Planned features, long-term:
- Improved battery charge algorithm for faster charging - Initial research indicates we have an alternate battery charger chip (MAX8922) that differs from the MAX8997 used in the I9100. We DO have an 8997 also - but on our device for some reason Samsung decided to use an alternate chip instead of using the 8997's built-in charging. This means we have far fewer options (90,400,660 mA) in terms of charge rates compared to the I9100 (from 200 to 950 in 50 mA steps). So we might not be able to implement any fancy charging algorithms.
Features not planned:
- BFS process scheduler - I have only once ever seen a test case where this clearly outperformed the mainline Linux scheduler (multithread x264 encoding) - The mainline schedule was fixed in the next release and BFS now has no performance benefits
- Any feature that trades off stability or data integrity for performance unless it can be disabled entirely and defaulted to "off"
- Any feature that cannot have functionality tested without a paid app. Interface-only checks don't cut it - I don't want users complaining that the app they paid for didn't work because an interface check worked but function didn't
- Touch recovery - too prone to accidental user errors - Maybe I will revisit when ICS hits.
Known issues:
- Power management regression somewhere between 12/8/11 and 1/2/12 - Intermittent high drain without high AOS or reduced deep sleep percentage when on some wifi networks - seems more likely if GPS is used when connected to wifi. Wifi with high AOS/reduced deep sleep is not a kernel problem. This appears to only happen on some firmwares - it happens on XXKI3 but not XWKL1. It is likely connected to a wifi power management bug in some firmwares. A debugging feature in 2/7 and later will allow identification of such firmwares - see http://xdaforums.com/showpost.php?p=22581928&postcount=1777 for details
- Some people have reported touchkey lights becoming disabled until the screen is turned off and back on again. Under investigation - seems to mainly happen on firmwares with BLN-modded liblights even if the BLN app isn't used
- Internal and External SD card are swapped in CWM currently
(Tested on Linux, not tested MacOS/Windows but should work) Heimdall - Extract the contents of the tar file, enter download mode, and flash with the following command line:
Code:
heimdall flash --kernel zImage
Flashing instructions for .zip releases:
Flash in CWM, or extract the zImage and use the Heimdall instructions above.
Please do not ask how to enter download mode or install Heimdall/Odin in this thread - these are basic generic skills anyone flashing custom firmwares on Samsung devices should know and plenty of documentation exists elsewhere. If you really need to ask, use the General forum, or if created, the Q&A forum. I want to try to keep this thread clean and only with bug reports and issues specific to this release, not general HOWTO or troubleshooting posts. Some of the information you need is in jivy26's FAQs thread at http://xdaforums.com/showthread.php?t=1288112 - Reading at least the first post of this thread in its entirety is STRONGLY recommended.
Bug reports:
If you have a crash (reboot all the way to Galaxy S I9100 screen), use ADB dump the contents of /proc/last_kmsg and post
If you have oddball behavior, include a clearly reproducible test case with your report, or use ADB to obtain a dmesg and logcat capturing the odd behavior at the time of error.
Similar to flashing - using ADB and obtaining last_kmsg, dmesg, and logcat dumps are basic skills that anyone working with custom firmwares on Android devices should have. If you need help with these, do some searching, or post in the General forum or, if created, Q&A forum.
Firmware ("ROM") Developers:
While I cannot restrict anyone from putting this kernel into a ROM as long as links are given to the github sources for GPL compliance, I request that anyone who includes this kernel in a firmware release does the following out of courtesy:
Link to this thread
Clearly indicate in your firmware changelog which Daily Driver kernel release is included in your firmware release whenever you change DD releases - this lets users identify whether a fix is present in the kernel they're using or not
Kernel Developers:
Similar to my request for ROM developers, while I can't restrict you from doing anything, I ask as a courtesy that if you cherry-pick my commits, you do the following:
Please don't rebase my commits into a large multi-feature without consulting me - rebasing related bugfixes together is OK.
Please try not to implement lots of unrelated features or bugfixes in a single git commit - it makes it hard to reimplement that when Samsung drops new sources or releases a new device
ALL OF MY RELEASES ARE NAMED BY RELEASE DATE - MMDDYYYY. See the changelog for differences between Experimental (exp) and non-exp versions for days where dual releases are made.
Attachments
-
DD_01232012.tar5 MB · Views: 7,039
-
DD_01242012.zip5.1 MB · Views: 2,326
-
DD_01292012.zip5.2 MB · Views: 496
-
DD_01302012.zip5.2 MB · Views: 1,645
-
DD_02072012.zip5.2 MB · Views: 1,719
-
DD_02152012_A.zip5.2 MB · Views: 153
-
DD_02152012_B.zip5.2 MB · Views: 125
-
DD_02152012_C.zip5.2 MB · Views: 479
-
DD_02182012_A.zip5.2 MB · Views: 205
-
DD_02182012_B.zip5.2 MB · Views: 851
-
DD_02262012.zip5.2 MB · Views: 516
-
DD_02282012.zip4.8 MB · Views: 729
-
DD_03022012.zip4.8 MB · Views: 318
-
DD_03032012.zip4.8 MB · Views: 248
-
DD_03032012_B.zip4.8 MB · Views: 153
-
DD_03042012.zip4.8 MB · Views: 204
-
DD_03042012_B.zip4.8 MB · Views: 389
-
DD_03052012.zip4.8 MB · Views: 806
-
DD_03072012.zip4.8 MB · Views: 9,911
Last edited: