Post Reply

1600mah Andida Battery For Motorola BP6X - Milestone 2

OP wilzson

4th October 2011, 05:26 PM   |  #21  
dangpzanco's Avatar
Senior Member
Thanks Meter: 83
709 posts
Join Date:Joined: Dec 2010
Originally Posted by crazyteknohed

I bought this battery and it's amazing. It lasts for days using a stock ROM with Juicedefender... I guess custom ROMs won't need JD.

Is it bigger/heavier than the stock one?
Could you make a little comparative between them?

Sent from my Milestone 2 XDA App
13th November 2011, 04:51 PM   |  #22  
djlooka's Avatar
Thanks Meter: 23
98 posts
Join Date:Joined: Sep 2011
I got my backup batteries stolen on the subway in London, so I had to buy them again (now I'm stuck with the original BP6X).

In case someone is still interested, I found that it's now much more convenient to buy (on the well known bidding site) 2x OEM BP7X and a bigger back cover than one BP7X and the cover altogether!
28th February 2012, 08:05 PM   |  #23  
Account currently disabled
Thanks Meter: 14
110 posts
Join Date:Joined: May 2011
Originally Posted by falecomcyber

I really don't trust on "higher batteries".
Battery is a thing that, if anything gets wrong, your phone could be damaged.

I agree with damaging your phone, but if you choose a good trustworthy manufacturer and stop hunting ebay for cheaper deals, then you have nothing to worry about. On the contrary well selected extended battery increases overall performance and with average use (mails, photos, twitter, blabla) your phone wont need any recharge for at least several days and in many cases its quite useful, depending on the lifestyle
amongst manufacturers with good reviews there is Mugen for example, those dudes even built a strong fan community, users satisfied, no phones damaged, i even read somewhere they have the lowest returned marchandise rate amongst aftermarket batteries, whatever it means...
So dont worry about higher batteries, go for it guys, just buy from official sources for warranty, then its all dandy.
The Following 2 Users Say Thank You to porcupineli For This Useful Post: [ View ]
6th April 2012, 09:35 PM   |  #24  
Junior Member
Thanks Meter: 0
14 posts
Join Date:Joined: Nov 2010
Thanks for tips battery is on her way...
19th April 2012, 03:59 PM   |  #25  
Junior Member
Thanks Meter: 1
9 posts
Join Date:Joined: Apr 2012
Anyone tried the Mugen 1700Mah battery yet?

Tempting, if a little expensive. I know Mugen are generally well trusted.
11th October 2012, 03:45 PM   |  #26  
Joiner22's Avatar
Thanks Meter: 34
57 posts
Join Date:Joined: Oct 2012
I'm looking to buy a bp7x, what do you think of this battery?
12th October 2012, 05:22 AM   |  #27  
Eleanor_Ir's Avatar
Junior Member
Flag Zhengzhou
Thanks Meter: 6
24 posts
Join Date:Joined: May 2010
If you need a longer standby time, it is recommended that use BP7X.
Although it after the shell is not very attractive.
21st October 2012, 07:24 PM   |  #28  
Junior Member
Thanks Meter: 1
12 posts
Join Date:Joined: Sep 2010
Thanks for your advice, I will look for Mugen in our country for my MS2.
24th October 2013, 07:39 AM   |  #29  
Thanks Meter: 6
69 posts
Join Date:Joined: Oct 2013
building tonclt
Originally Posted by patton82

Milestone 2 works well only with original battery bp6x and bp7x, probably because of an embedded control chip

You can charge your non-original battery with a external dock, there's nothing else you can do

I bought a Chinese batareki three dollars. They worked fine, but their capacity is not 1400. 600-700 - I would believe
26th October 2013, 10:29 PM   |  #30  
Junior Member
Thanks Meter: 3
21 posts
Join Date:Joined: Aug 2012
This Andida battery looks pretty awesome

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes