Xvasek2 has created a few kernels compatible with stock firmware. You can find them in Kyle Open ROM thread.
Hit THANKS if I helped
Sent from my GT-I9070 using xda app-developers app
[ROM][4.0.4][GT-S7562] KyleOPEN ROM v3.4.0 FIXED (for Galaxy S Duos) 26 July Update
- Thread starter cheatman
- Start date
Xvasek2 has created a few kernels compatible with stock firmware. You can find them in Kyle Open ROM thread.
Hit THANKS if I helped
Sent from my GT-I9070 using xda app-developers app
question
hi, is there any chance to have all the shorcuts present on the notification bar like in stock rom? if yes, how? thanks
hi, is there any chance to have all the shorcuts present on the notification bar like in stock rom? if yes, how? thanks
Touch Screen almost DEAD
My device Touch screen it's almost dead, after I "alow" Kyleopen Tools in accessibility my touch stop working...
Only a few times I can unlock the device... I must press many times the screen to sense my finger, and it only tap, I can't scrolling
basically...
I cannot use my device, what Should I do?
Any tips? I wiped everything I saw... and reinstall the rom... but without success... Maybe I will try the stock rom to solve this problem
This all happened after I had many times "shell was guaranteed superuser access" or something... my device is in Portuguese, so the message have some differences.
Any tips?
Should I tried Stock one?
If doesn't work, what should I do? the guarantee are not applied in this situation...
My device Touch screen it's almost dead, after I "alow" Kyleopen Tools in accessibility my touch stop working...
Only a few times I can unlock the device... I must press many times the screen to sense my finger, and it only tap, I can't scrolling
basically...
I cannot use my device, what Should I do?
Any tips? I wiped everything I saw... and reinstall the rom... but without success... Maybe I will try the stock rom to solve this problem
This all happened after I had many times "shell was guaranteed superuser access" or something... my device is in Portuguese, so the message have some differences.
Any tips?
Should I tried Stock one?
If doesn't work, what should I do?
the guarantee are not applied in this situation...
My device Touch screen it's almost dead, after I "alow" Kyleopen Tools in accessibility my touch stop working...
Only a few times I can unlock the device... I must press many times the screen to sense my finger, and it only tap, I can't scrolling
basically...
I cannot use my device, what Should I do?
Any tips? I wiped everything I saw... and reinstall the rom... but without success... Maybe I will try the stock rom to solve this problem
This all happened after I had many times "shell was guaranteed superuser access" or something... my device is in Portuguese, so the message have some differences.
Any tips?
Should I tried Stock one?
If doesn't work, what should I do?
I saw in the beginning of pages someone also had the same problem, you can search and ask him if he solved his problem?
I hope you took backup of your stock rom, just restore stock rom and see if works.
Sent from my GT-S7562 using xda premium
Hello Guys. Today i completely wiped the phone and flashed S7562XXBMD2_S7562ODDBMD1_INU after which i got the 50MB update and did that also. Then i rooted by droidiser method (http://www.droidiser.com/2012/10/how-to-root-samsung-galaxy-s-duos-install-cwm.html) and then flashed Kyle OC kernel from first post. everything works fine but voltage kernel gives me following error. anybody can help in solving this? am not able to attach so please check here https://www.dropbox.com/sh/2qd4jni4o8gywr6/vKQxQGtdcZ
Discontinued-back to theming work
Hello Guys!!!!!
Good news.....
I successfully made a new ROM based on Indian latest firmware(as above )
EDIT: See my Signature part
Today i downloaded 'S7562XXBMF2_S7562ODDBMF1_INU'
Indian stock latest update.
Today i will update my all themes and then i will install this stock update to my phone
And then i will work on this latest stock update.
Hello Guys!!!!!
Good news.....
I successfully made a new ROM based on Indian latest firmware(as above
)- Very very Smoothy
- Fully Themed
- Optimized
- Bloatwares removed(some)
EDIT: See my Signature part
Last edited:
re: "Download to your PC the custom recovery image that enables CWM, if you don't have it already, from here"
cheatman, thanx for your excellent efforts. do you mind checking the given link, though?
https://docs.google.com/file/d/0B_NLqfSyZfYAZkhmaVQydVNqem8/edit?usp=sharing
seems to be broken and until OK from your side I do not dare to proceed.
kindest regards
Damian
cheatman, thanx for your excellent efforts. do you mind checking the given link, though?
https://docs.google.com/file/d/0B_NLqfSyZfYAZkhmaVQydVNqem8/edit?usp=sharing
seems to be broken and until OK from your side I do not dare to proceed.
kindest regards
Damian
That's very kind of you to work on custom rom. Kindly Upload it and please , provide some screenshot for users to see.
Thank You once again for your efforts.
You may consider making a new thread for this custom rom
470MB is fine,stock rom used to 550+ , atleast some development work would get started.
Thank You once again for your efforts.
You may consider making a new thread for this custom rom
470MB is fine,stock rom used to 550+ , atleast some development work would get started.
Hello Guys!!!!!
Good news.....
I successfully made a new ROM based on Indian latest firmware(as above
- Very very Smoothy
- Fully Themed
- Optimized
- Bloatwares removed(some)
- OC 1.2 GHz
But its about 470 MB
Should i upload it?
EDIT: Few issues found, will update soon
Last edited:
@Anvil2k12: the file is not broken, I have personally used it a couple of times to restore my device. Download again if you cannot unzip the file.
@Mohitash & other ROM cookers: Due to the popularity of this thread with all S Duos owners, I have no problem with you letting the world know about your other ROM initiatives. You and everyone else can use the thread (due to a lack of dedicated forum sections) to create user awareness. However, I kindly ask you to NOT ABUSE this privilege and make a separate thread for your ROM and simply provide a link to it. Within the new thread you can give all the info you want related to bugs, issues and upcoming versions.
PS: this ROM is a community effort and everyone is allowed and encouraged to contribute. However, please bear in mind that we're doing this for free and our time and effort was put into generating the result you see here. Please do not take the work we do or the effort invested for granted.
Cheers,
C.
@Mohitash & other ROM cookers: Due to the popularity of this thread with all S Duos owners, I have no problem with you letting the world know about your other ROM initiatives. You and everyone else can use the thread (due to a lack of dedicated forum sections) to create user awareness. However, I kindly ask you to NOT ABUSE this privilege and make a separate thread for your ROM and simply provide a link to it. Within the new thread you can give all the info you want related to bugs, issues and upcoming versions.
PS: this ROM is a community effort and everyone is allowed and encouraged to contribute. However, please bear in mind that we're doing this for free and our time and effort was put into generating the result you see here. Please do not take the work we do or the effort invested for granted.
Cheers,
C.
your are right!
got to do with FF safety settings where we filtered all redirection > 2 been
out by default.
setting it higher worked on tha file (see top right).
even so, re-re-re-dir is always a matter of concern and usually a sign of sinsiter sites
so attach shows setting it back to 2, which works fine on almost all sites.
thanx
Damian
Attachments
KyleOpen ROM 3.2 I will miss you so bad *-*
I did that but the problem was still the same, I install the famous Indian Rom, and actually it worked to solve my problem about the touch screen, however... :cyclops:
Damn @cheatman ... you're rom is absolutely fantastic, I miss it so much, this stock rom it's not bad, but it reminded me why I was searching for a custom rom
A good way better looking style, and much smoother, thank you so much for your work (the stock launcher in the INDIAN rom is so... sluggish)
I will be back to this rom and pay you a beer off course :highfive:
I did that but the problem was still the same, I install the famous Indian Rom, and actually it worked to solve my problem about the touch screen, however... :cyclops:
Damn @cheatman ... you're rom is absolutely fantastic, I miss it so much, this stock rom it's not bad, but it reminded me why I was searching for a custom rom
A good way better looking style, and much smoother, thank you so much for your work (the stock launcher in the INDIAN rom is so... sluggish)
I will be back to this rom and pay you a beer off course :highfive:
Turned back to stock rom from kyle open to checkout the new update. The new update really brings some nice changes, I see the blocking option now there in setting menu, also some new apps chrome, play movies, play books are added. Also for a fresh install , the ram usage has reduced to abt 350 - 400 MB which is fair enough. So, far performance is smooth, will let you know how device performs after installing the apps.
However, I have noticed one thing, kyle Open doesn't slow down even after installing lots of apps, will let you know how's the device perform with stock rom after installing lots of apps.
However, I have noticed one thing, kyle Open doesn't slow down even after installing lots of apps, will let you know how's the device perform with stock rom after installing lots of apps.
Too many chefs spoil the broth
may only apply to my phone but these things will not do
following exactly post#1. as advised flashed into XXALJ4
which is working fine:
"Update Instructions"
# Make sure you are running a proper stock ROM (like XXALJ4...)
error using the zip containing KOR 3.20 relase from this site: "..signature failure...aborted"
SOLVED: forgot to clear the cashes (tiny line withing all the instruction but very important!)
Kyle tools:
error ["Press reboot in recovery mode"] - nothing happens no matter how many times you press.
error pressing [Exit] - stalls in a window saying "boot sounds checking...",
stall can only be killed/finished pressing the home button.
SOLVED: works properly if KyleRom md5 is installed
kindest regards
Damian
ps
and can someone please explain to me: why is this site scripting cross-side (see attach)?
this is often used to introduce malicious stuff hence is always blocked in vulnerable systems!
may only apply to my phone but these things will not do
following exactly post#1. as advised flashed into XXALJ4
which is working fine:
"Update Instructions"
# Make sure you are running a proper stock ROM (like XXALJ4...)
error using the zip containing KOR 3.20 relase from this site: "..signature failure...aborted"
SOLVED: forgot to clear the cashes (tiny line withing all the instruction but very important!)
Kyle tools:
error ["Press reboot in recovery mode"] - nothing happens no matter how many times you press.
error pressing [Exit] - stalls in a window saying "boot sounds checking...",
stall can only be killed/finished pressing the home button.
SOLVED: works properly if KyleRom md5 is installed
kindest regards
Damian
ps
and can someone please explain to me: why is this site scripting cross-side (see attach)?
this is often used to introduce malicious stuff hence is always blocked in vulnerable systems!
Attachments
Last edited:
New rom, can't wait.
yeeeeeeeees pliiiiiiiiz doooooo!!!
hello guys!!!!! :d :d
good news.....
I successfully made a new rom based on indian latest firmware(as above
- very very smoothy :d
- fully themed
- optimized
- bloatwares removed(some)
- oc 1.2 ghz :d
but its about 470 mb
should i upload it?
edit: Few issues found, will update soon
yeeeeeeeees pliiiiiiiiz doooooo!!!
Similar threads
- Poll
- Locked
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
394Welcome to the KyleOPEN ROM for Galaxy S Duos
(Dual-Sim Phone / GT-S7562 device model)
KyleOPEN ROM Features:
- Based on stock S7562XXBMD6 ROM
- Debloated (see list of removed bloat below)
- CM9 Imported (see list of CM9 packages below)
- Deodexed / zipalligned (can be themed!)
- Rooted (incl. insecure kernel using chainfire modded adbd method)
- Custom boot image enabled
- Custom boot sounds enabled (wav only!)
- Busybox support
- Overclock / Governor Kernel
- init.d script support
- Add-on support
- OTA Update engine
- Google Now included
- Flashplayer support (download flash APK from here)
- Samsung S Voice support through add-on (see post #3)
- QtADB Support (get it here)
List of removed packages:
List of imported CM9 packages:
Code:- CM9 Apollo Player (add-on) - CM9 Keyboard - CM9 Launcher (Hello Trebuchet!) - CM9 EMail & Exchange - CM9 Browser - CM9 Gallery (add-on) - CM9 File Manager - Magic smoke live wallpapers
Installation instructions:
WARNING: Flashing this ROM will make the orange triangle appear and increase the flash counter. Flash at your own risk, I am not responsible for your actions. Follow the instructions below ONLY if YOU are sure of what you are doing. Otherwise stop here. You can reset the counter and remove the triangle using the app developed by chainfire (triangle remover).
Installation Details & HowTo:
- The GT-S7562 has a download mode and a recovery mode. Both are boot modes that allow the device to start but enter a different configuration mode than regular Android start mode. Think of them like starting your PC and entering the BIOS instead of loading Windows as usual.
- The "download mode" is a boot mode that allows flashing bit-by-bit (very low level) data to partitions on your device. To enter download mode on the S7562 do the following: make sure the device is well charged (over 50%); remove all cables (this is important); power it off (don't reboot); hold volume down + home and power on the device (volume down+home+power). Then a warning will be displayed on screen. You must press Volume Up to enter download mode.
- As long as you can enter "download mode" you can recover your device. While in download mode, you can use the ODIN tool to flash recovery, boot and ROM images.
- The "recovery mode" is a boot mode that allows "safe mode" changes to be performed on the device. This is done using CWM, a tool that can be used to automate Android system changes to system files, partitions etc. To enter recovery mode on the S7562 do the following: make sure the device is well charged (over 50%); remove all USB cables (this is important); power it off (don't reboot); keep volume up + volume down + home and power on your device.
- To navigate in recovery mode, use the volume buttons to change active selection and the home button to make selections. The back button works as back button. When done working with recovery, go back all the way and select option to reboot system to boot your device normally.
- Before installing KyleOpen ROM, make sure you are running XXBMD6 as base ROM. If you skip this step, you may have network and signal problems after installing KyleOpen ROM. So, download the ROM image here and flash it from download mode using ODIN and PDA button BEFORE you continue!!!
- Download to your PC the custom recovery image that enables CWM, if you don't have it already, from here
- Reboot in download mode to flash CWM
- Unzip the file in your computer and start ODIN.
- Click the PDA button and select the "kyleopen-cwm5-v3.tar.md5" file.
- Connect your phone that is already in download mode. ODIN will display it as being connected on a COM port.
- Do not change any other options. Just click the "Start" button and wait. In about 1 minute, on your device there will be a loading bar displayed. Once done the phone will reboot itself normally. ODIN will tell you the flash was OK and restart your device. This operation will increase the flash counter and make the orange warning triangle appear. This is normal and is not a problem. From this point on, you can boot in recovery mode and flash CWM zips.
- Let the phone restart normally and boot up completely. Now you are ready to upgrade your stock ROM to KyleOPEN ROM.
Update Instructions:
- Make sure you are running a proper stock ROM (like XXBMD6 or any version of KyleOPEN ROM)
- Download the OTA update utility app attached to this post and install it if you didn't already.
- Run the KyleOpen Tools and check for updates. If your ROM does not have root access it's gonna be slow to start and may not show the proper information, but the update check and download will work just fine.
- Download the update and save it.
- Press reboot in recovery mode.
- Install the downloaded zip.
- Clear cache and davlik cache.
- Reboot system.
- Hit the thanks button or you will be ignored in the thread!
Note: The recovery ZIP also contains the stock recovery image. The stock ROM can also be found on http://www.sammobile.com
Mirrors for use without OTA updater:
Alternate download methods in case you don't want or can't use the OTA update utility can be found below. Download the ZIP files, copy them to your device and reboot in CWM to flash them.
Credits:
Code:- Project Flulid team, for build.prop tweaks - leolawliet for disabling of CPU rendering - Mirko ddd for back button to kill app mod - einst31n for the facelift of the ROM logo and the default theme - VamshiStunner for his awesome work on the kernel, especially OC! - hybridmd, for the init.s script add-on to swap SD memory cards - P.thina for finding the fix for no network that some users had!!!! - nakedninja42 for face unlock tips - Samsung for the device and software development - Google and the Android community for an awesome OS - The CM9 team for their work on ICS - XDA Developers for letting us post our work, help others and unleash our devices - dsixda & chainfire for their previous work on Samsung devices - Everyone else out there that makes this worth the effort...
Cheers,
C.111Next Version Changelog:
- Next version - Nothing yet... only bug fixes are planned from now on.
Older Changelog:
FAQ & Known Issues:
- I am on stock version XXXXXX, will KyleOPEN ROM work? - I have no idea. Try it and report back. In case you get network problems try a different base. Use XXBMD6 as base whenever possible.
- What baseband is supported - Baseband is not affected by this ROM, it does not change it and any baseband version is compatible.
- My CSC is "unknown", why? - That is normal and the phone works correctly. It works in roaming and all providers.
- My phone requests unlock code - You must unlock EFS to use it on other networks if you purchased it on a contract. This ROM does not unlock your network.
- Notification quickbuttons missing - This is normal. If you want them back flash the "Stock Samsung Theme v1" add-on in post #3 below.
- I want stock theme back! - If you want the stock icons and colors back, then flash the "Stock Samsung Theme v1" add-on in post #3 below.
- Direct Call widgets don't work - These widgets are part of the Trebuchet launcher and only work on CM9. In KyleOPEN, they will not work, due to a couple of intent security limitations. There is no workaround for this problem. If this is bothering you, use another launcher or don't use these widgets.
- Browser white address bar problem - I have no idea what causes this. It is only for some browsers. Use Google Chrome to avoid this problem.
- Cannot change lock screen wallpaper - Go to settings->wallpaper and choose to change both wallpapers. Apply any live wallpaper. Then set a new wallpaper with your favorite app. Alternately, install stock gallery (see post #3 belov), change lock screen wallpaper and then remove or disable it.
- Where is kernel OC??? - The default ROM package starting with version 3.1 does not come with OC as it's unstable and not all users need it. For OC support, install a compatible kernel with OC support from post #3 below.
- How can I get back to stock? - You must download a compatible image from samfirmware.com and flash it using ODIN.
- XXXX doesn't work correctly, what can I do? - Follow the installation steps in the first post. There are no known bugs (things that don't work) in the ROM.
- Some applications force close after installing the ROM - This happens because you did not follow the installation steps provided. Reboot in recovery mode and clear cache and dalvik cache.
Resolved Issues:
101List of compatible Themes:
Flash the themes by rebooting in recovery mode and using CWM to install ZIP. It's a good idea to clear caches and dalvik before testing them out:
- Greenblast Theme by charles111 - Get it here: https://www.dropbox.com/s/2dm0w4hc69jyyfd/the greenblast v2.00.zip (theme thread here)
- PurpleGlow Theme by Mohitash - Get it here: http://xdaforums.com/showthread.php?p=42058670
- BlueGlow Theme by Mohitash - Get it here: http://xdaforums.com/showthread.php?p=42093164
- CyanGloss Theme by Mohitash - Get it here: http://xdaforums.com/showthread.php?p=42170668
- BlueGloss Theme by Mohitash - Get it here: http://xdaforums.com/showthread.php?p=42194443
List of compatible Add-Ons:
These add-ons provide additional functionality to the ROM and do not bork already existing features. None of them are mandatory and you can install only the ones you want. To remove an add-on that was flashed using CWM, simply reinstall the KyleOPEN ROM again and the add-ons you want to keep. There is no other way to uninstall a CWM package with ease.
List of other compatible packages (not mine, not tested, don't ask about them):
List of compatible kernels:
Please note: Regular users should stick with the kernel version included in the ROM by default. If you encounter issues with any of these other kernels, flash the ROM again using CWM to restore the default kernel.
- GitHub link to the KyleOpen 4.0.4 Kernel: https://github.com/cheatman-xda/kyleopen-kernel
- KyleOPEN Kernel v5 - Stock kernel with additional CPU governors, overclocking support, init.d script support, root enabled. Flash directly with ODIN. Credits go to VamshiStunner for his work on governors in this kernel version. NOTE: Although it seems to have OC, it is not working. Setting OC values will not boost the phone's performance as it will run at 1GHz no matter how you configure it.
- KyleOpen ROM Kernel OC1 - Bleeding edge kernel with increased sensitivity, all features activated and custom boot logo image. Only for the hardcore fans and power-users of KOR that know what they're doing.
- xvasek2 - Breakfast Kernels - OC Kernels for everyone, plenty of speeds to choose from. If you really want OC and can't get around with any setup, use these kernels confidently. Don't forget to follow the instructions and check your balls (or instincts for the ladies!) before you proceed. All kernels should be flashed using ODIN.
45Breakfast kernels
Hi 7562 overclockers and tuners.
Considering all pros and cons, I have compiled 14 OC kernels during my today's breakfast. Each one of them has one specific frequency added above standard 1008MHz, beginning with 1.05 up to 1.3GHz. You can find them here:
http://stodulkovi.cz/kyle/breakfast-kernels/
Flash via Odin.
It may not be the smartest solution possible, but it brings overclocking to everyone and it has also some advantages. You don't need to have any OC app (OC is apllied automatically during boot), you don't need to have you phone rooted, you can allways go back simply via Odin.
Cons are, that overclocking process may take you some time and you will probably need to flash more times.
In future I may make universal kernel, which will boot at 1GHz and then user will overclock by app, but do not expect it in days, maybe weeks. It's because I'm happy now at 1,17GHz and "don't repair it, when it is not broken".
How to apply:
- Guess, how fast your phone may be - it depends on size of your balls. (Girls have intuition, so they will allways success on first try! )
- Download appropriate kernel
- Flash via Odin
- If it booloops, then you actually have smaller balls then you think and goto 1.
- If it does not bootloop, you may have bigger balls then you think, you can maybe download faster kernel and goto 3.
If your phone does not run even at 1.05GHz, make sure, that you are flashing 7562. If yes, then you have something between Samsung and death, or I have bug somewhere. Anyway, write me PM. If you want more then 1.3GHz, write me PM, I will make you special kernel.
When flashing, you will probably find a frequency, which does boot, but is unstable - for me it is 1.2, phone resets every few minutes. One frequency less you will be quite stable (for me 1.19GHz), but the phone may reboot once a day or so. Next frequency (for me 1.17GHz) will probably be rock stable.
And - as it is allways with overclocking - you can harm your device, I take no responsibility. But it should be quite safe, the worst I expect is bootloop repairable by safe kernel via Odin.41Yet again, time to rejoice because the KOR version 3.2.0 is out now! Here is the list of goodies included in this latest version:
- v3.2.0 - Memory tweaks (minfree, swappiness, cache, dirty)
- v3.2.0 - Menu button hold to kill app
- v3.2.0 - New system theme by einst31n
- v3.2.0 - New update push notification support
- v3.2.0 - Automatic / manual update checks
- v3.2.0 - Re-design of the OTA update utility interface
- v3.2.0 - Enable/disable custom boot sounds (KOR v3.1.0 and later)
Don't forget to spam the thanks buttons of everyone who made this release possible!
Cheers,
C.
