What size battery!!?? Lol
Sent from my PC36100 using Tapatalk 2
Stock
Sent from my PC36100 using xda premium
What size battery!!?? Lol
Sent from my PC36100 using Tapatalk 2
Result of 1 would indicate audio boost is enabled correct? Tia.
Sent from my ever-changing Evo.
Thanks for the update. I'm running carodope tweaks with mikg. One of the tweaks is vfs cache pressure. Your default value from the kernel is higher. Should we keep it at your value?
Sent from my PC36100 using Tapatalk 2
Just bought a Anker 1700mah battery and I still can't get SBC to stick. Don't know what else I can do from here.
Yea I've tried different chargers, wall outlet combo same results and I'm using battery monitor widget. If i'm not mistaken SBC should be working if I'm seeing +2 or +4mA around 30 mins to an hour after the phone is fully charged. But I'm getting the opposite
after the phone becomes fully charged and hits 0mA I begin to see negatives shortly after.
You are correct in what it should be doing and if it isn't then it's not working for you.
I had this problem with one of nets kernels on froyo, it would sbc charge for some but not others. Have you tried ca1ne's classic kernel to see if it works? Also maybe when it hits 100 unplug it and plug it back in, I know it's not ideal but some did that with nets kernel and it worked.
Also what recovery are you using, what rom are you on, and what's your flashing/wiping process? Sorry if you have already mentioned all this and I missed it.
Yep tried Ca1ne's classic as well, no stick either. The recovery I'm using is Ra, the rom is MIKG v3.11 and I usually wipe cache and dalvik cache before and after I flash anything.
I'll try unplugging it from the charger next time it's fully charged and see where it get's me.
Thanks for the update. I'm running carodope tweaks with mikg. One of the tweaks is vfs cache pressure. Your default value from the kernel is higher. Should we keep it at your value?
Sent from my PC36100 using Tapatalk 2
Yep tried Ca1ne's classic as well, no stick either. The recovery I'm using is Ra, the rom is MIKG v3.11 and I usually wipe cache and dalvik cache before and after I flash anything.
I'll try unplugging it from the charger next time it's fully charged and see where it get's me.
Yes, and I set it to 50. But the OP says the default for the kernel is 75 now instead of 100. Just wondering if it's more ideal to leave it at 75 as per the intention of the kernel or leave at 50 as per COD recommendations.I haven't updated to v6 yet, but your VFS cache pressure should be set to 50 for CoD in sense.
Sent from my A500 using Tapatalk 2
Love this kernel Ca1ne! You are awesome!
Sent from my PC36100 using xda premium
Well I've tried unplugging it and rebooting it several times SBC still won't stick. Also I've read that guide and have already done a completely clean install prior to flashing the rom.
Audio Boost On
echo 1 > /sys/kernel/audio_boost/aboost
Audio Boost Off
echo 0 > /sys/kernel/audio_boost/aboost
Query Audio Boost Status
cat /sys/kernel/audio_boost/aboost
USB Fast Charge On
echo 1 > /sys/kernel/fast_charge/fast_charge_usb
USB Fast Charge Off
echo 0 > /sys/kernel/fast_charge/fast_charge_usb
Query USB Fast Charge Status
cat /sys/kernel/fast_charge/fast_charge_usb
havs kernel has an upper and lower range, while the normal kernel has a static range.. i pulled from my source code the havs voltages and commented after the line the original voltage.
{ 19200, 950, 950 }, // orig voltage 1050
{ 128000, 950, 975 }, // orig voltage 1050
{ 245000, 950, 975 }, // orig voltage 1050
{ 384000, 950, 975 }, // orig voltage 1050
{ 422400, 950, 975 }, // orig voltage 1050
{ 460800, 950, 975 }, // orig voltage 1050
{ 499200, 950, 1000 }, // orig voltage 1075
{ 537600, 950, 1025 }, // orig voltage 1100
{ 576000, 950, 1050 }, // orig voltage 1100
{ 614400, 950, 1075 }, // orig voltage 1125
{ 652800, 950, 1100 }, // orig voltage 1150
{ 691200, 975, 1125 }, // orig voltage 1175
{ 729600, 975, 1150 }, // orig voltage 1200
{ 768000, 975, 1175 }, // orig voltage 1200
{ 806400, 1150, 1200 }, // orig voltage 1225
{ 844800, 1175, 1225 }, // orig voltage 1250
{ 883200, 1200, 1250 }, // orig voltage 1275
{ 921600, 1200, 1275 }, // orig voltage 1300
{ 960000, 1225, 1275 }, // orig voltage 1300
{ 998400, 1225, 1275 }, // orig voltage 1300
{ 1036800, 1275, VOLTAGE_MAX }, //overclocked cpu no orig voltage
{ 1075200, 1275, VOLTAGE_MAX }, //overclocked cpu no orig voltage
{ 1113600, 1275, VOLTAGE_MAX }, //overclocked cpu no orig voltage
{ 1152000, 1300, VOLTAGE_MAX }, //overclocked cpu no orig voltage
{ 1190400, 1325, VOLTAGE_MAX }, //overclocked cpu no orig voltage
{ 1228800, 1350, VOLTAGE_MAX }, //overclocked cpu no orig voltage