I see you were able to root the Pantech element. The information at Root&CWM is very helpful. However, it is also very convoluted to me, as a newbie, trying to root my device. I have rooted an Android phone I have, and was able to load apps that was otherwise incompatible, and got rid of some of the blotware by the provider, so I am somewhat familiar with the process, but what was most helpful was a listed order of steps. Is there any way we can get a step by step process?
FYI, it's not listed in the specs, but I just tried it and it works: the Pantech Element is compatible with USB Host mode, i.e. USB on-the-go.
Tried both a mouse and an external flash drive, both worked fine.
Plugging in a full external hard-drive that draws a lot of power over USB didn't work so fine, causes a consistent reboot.
Is any chance to use it as regular phone by running some phone.apk from regular phone? And maybe you know if headphone PL3.5 socket has mic connection ?
FYI, it's not listed in the specs, but I just tried it and it works: the Pantech Element is compatible with USB Host mode, i.e. USB on-the-go.
Tried both a mouse and an external flash drive, both worked fine.
Plugging in a full external hard-drive that draws a lot of power over USB didn't work so fine, causes a consistent reboot.
Which adapter did you use ?
My Nokia CA-157 cable doesn't fit Pantech's micro USB connector - it has different shape.
After rooting my camera no longer works. It Force Closes every time. Any ideas?
This is a great tablet.
and look like a good quality tablet and pretty fast too,
I wish there was more development.
As for rooting , is it really worth it specially now that there is almost no development on this device.
Can someone please post the build.prop.. I really wanna play uno on my hp touchpad.. i need this to let it work properly, or atleast try.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=HTK75
ro.build.display.id=HTK75
ro.build.version.incremental=pororo_ver1_0603
ro.build.version.sdk=13
ro.build.version.codename=REL
ro.build.version.release=3.2.1
ro.build.date=Mon Nov 28 21:36:09 KST 2011
ro.build.date.utc=1322483769
ro.build.type=user
ro.build.user=p13690
ro.build.host=bs78
ro.build.tags=release-keys
ro.product.boardnswver=MSM8660_SURF TP10 JWUS12052011
ro.product.model=PantechP4100
ro.product.brand=ATT
ro.product.name=PantechP4100
ro.product.device=pororo
ro.product.board=MSM8660_SURF
ro.product.cpu.abi=armeabi-v7a
ro.product.baseband_ver=JWUS12052011
ro.product.baseband_ver_hidden=JWUSS0811282011
ro.product.version=TP10
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=PANTECH
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8660
ro.carrier=ATT-US
# ro.build.product is obsolete; use ro.product.device
ro.build.product=pororo
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=msm8660_surf-user 3.2.1 HTK75 release-keys
ro.build.fingerprint=ATT/PantechP4100/pororo:3.2.1/HTK75/pororo_ver1_0603:user/release-keys
ro.build.characteristics=tablet
# end build properties
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.composition.type=dyn
debug.overlayui.enable=0
dev.pm.dyn_samplingrate=1
# [LS5] Kang Seong-Goo, LCD is portrait
ro.sf.hwrotation=90
# [LS5] Kng Seong-Goo, Disable Tiled Rendering
# enable again
# disable again 11.11
debug.enabletr=0
#
# system props for the cne module
#
persist.cne.UseCne=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
ro.hdmi.enable=true
#
#lpa.decode=true
#jmlee Emersys EQ --> LPA Dsiable
lpa.decode=fasle
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#
# system props for SD card emulation of emmc partition
#
#<-- p11171 dongseok modified
#ro.emmc.sdcard.partition=17
#ro.emmc.sdcard.partition=26
ro.emmc.sdcard.partition=27
#-->
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
#
# system prop for Bluetooth FTP profile
#
ro.qualcomm.bluetooth.ftp=true
#
# system prop for sending power off request to RIL during phone shutdown
#
ro.ril.shutdown=true
# System property for cabl
ro.qualcomm.cabl=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.setupwizard.mode=REQUIRED
ro.com.google.gmsversion=3.2_r5
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.config.notification_sound=Tinkerbell.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/system/lib/libqc-opt.so
keyguard.no_require_sim=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Hey, I been messing with my Element, I love this thing but I was trying to hard to get a the ATT update on it, (guess I know now it is kinda useless) none the less I tried to 'unroot' to accomplish this by flashing the stock img on it now all I get is the ! android on startup and my pc will not recognize it in ADB, nor will it mount internal sd or external sd for updates. Any ideas on how to flash an img back on this thing so I can use it? two days w/o it and I am hurting here. Tried to reinstall my drivers for it but my control panel is giving me some errors. I will play some more but any direction/help/rescue is appreciated.
Thanks
I can't say I 100% understand what your situation is, but you can boot to recovery still?
please tell me how to make root and add Cwm on the official firmware 4.0?
Could someone please post a list of which bloatware is safe to remove?
All I've done is rooted mine. I tried two different Elements on two TVs with the same cable.
My son's A100 works fine so the cable should be good. The element won't put out HDMI. I rooted it with just ADB commands to push su and chown, etc. Minimally invasive.
I reflashed the first tablet with the flasher so it was stock. I RMA'd it thinking bad HDMI port.
Same problem with the new one.
Any ideas?