The ROM just has the default CyanogenMod kernel with it.
Sent from my Incredible 2 using XDA
[ROM] Unofficial CM9 for vivow (2012-09-05)
- Thread starter aeroevan
- Start date
-
- Tags
- cm9 cyanogenmod development ics
- Status
The ROM just has the default CyanogenMod kernel with it.
Sent from my Incredible 2 using XDA
Yep just finished flashing and figured that out. Everything looks good so far.
Bill
Sent from my Incredible 2 using XDA
I'm running the new multitouch build. It's definitely getting better. I couldn't do anything but jump in Temple Run before, and now it's working a lot better. It seems like a lot my swipes are still being registered incorrectly though. For example, swiping up should jump but it makes me slide instead and vice versa.
Edit: This happens in combination with the "multitouch build" and aeroevan's v9 kernel. I haven't tried the stock kernel or any other games.
Edit: This happens in combination with the "multitouch build" and aeroevan's v9 kernel. I haven't tried the stock kernel or any other games.
Last edited:
It's the latest with Multitouch fixed
Does this new rom feel slightly less responsive than the on with multitouch broken?
Btw amazing job aeroevan
It feels pretty good to me. I can actually play Temple Run now, the first time I've been able to do that on any of Ics roms that I've used so far.
Auto brightness still doesn't seem to work. Every time you unlock the brightness locks at the brightness applies upon turning screen on
I just tested with the "Pointer Locataion" test in Dev Tools. That seems to register both touches and doesn't release the first touch when the second is lifted. I'm not sure what other bugs there might be, but I couldn't find any using that app.
Anyone who still can't play games such as Temple Run, are you guys doing a full wipe or just dalvic cache and /cache???
I ask this because this could cause a lot of confusion. I still haven't had time to flash this, but if someone who did a full wipe (wipe data, wipe cache, wipe dalvic cache, and format system) can reply and inform us your results.
People that only did partial wipes let us know your results also. I already am seeing some mixed results.
I ask this because this could cause a lot of confusion. I still haven't had time to flash this, but if someone who did a full wipe (wipe data, wipe cache, wipe dalvic cache, and format system) can reply and inform us your results.
People that only did partial wipes let us know your results also. I already am seeing some mixed results.
I've only been doing Cache and Dalvik wipes when going from one of Aero's CM9 roms to the next. Since Its been a few builds since I've been doing this, I'll probably do a clean install on the next build.
So far though, I haven't really experienced anything weird.
I first do the Cache and Dalvik wipe in 4ext recovery, then flash the rom, the latest gapps (3-17), Ics Reloaded 1.93b, the agps patch and finally Aero's V9 kernel. Reboot and enjoy.
This may not work for everyone, and isn't the recommended way, but I've been known to not always follow the rules
I always do a full wipe and its still a little buggy.. doesn't register Tue swype correctly on temple run... when I play scramble with friends I get lag too.. some words I find don't even register
Sent from my Incredible 2 using xda premium
Multi touch is a free app from the market. I am on the other cm9 and it has 4 touch points. When I was on cm7 dx2 moon shadow made a script to make it 8.
The apps I had previously seen the largest issues in were IGunZombie, Dungeon Hunter 3, and Cartoon Wars: Gunner. Essentially any app where you had two fingers on the screen at the same time.
The description of the 1st point not releasing when my second finger remained on the screen is a very accurate description of what I was seeing.
Very glad to see that this bug is finally being addressed. As soon as someone can work it out, I'm going ICS as my daily
OK so I got temple run working, but it doesn't always register the swipes correctly. This is the first ics build that I could even get into the game, so the fact that I can even play it is an achievement. Great work by Aerovan. I didn't do a full wipe by the way..just cache and dalvik. Everything is running smooth, so you guys should be ok doing the same.
Yea, the native wifi tether works flawlessly for me. I use it all the time to display android tablets to my customers at my work.
And no, Verizon can't tell that your using it without their knowledge so you don't have to worry about being charged for using it. Although I have herd mixed views on this subject, but I can't see how Verizon could tell since the phone is acting as a router and does not report the ips the phone assigns to other devices. Its just like having a router hooked up to your internet providers modem. Access to the internet from connected devices is governed by the router which is receiving the service through one dynamic ip from your provider. Can they tell if theirs more traffic then normal? Yea prob, but nothing they're really ganna look into unless you abuse it A LOT. Lol
Sent from my Incredible 2 using Tapatalk
Anyone know where I can find the ringtones and alarm sounds that were taken out of the last two releases?
The specific ring tone I am looking for is "digital phone" and the alarm is "beep-beep-beep"
The specific ring tone I am looking for is "digital phone" and the alarm is "beep-beep-beep"
- Status
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
137Hi, I decided to start an official post here on XDA too since the ICS thread over in general is getting rather large.
Downloads:
ROM:
GApps:
Directions:
- Wipe Data, Cache, and system
- Flash the ROM
- Flash GApps
- Reboot into the system (first boot will take several minutes)
If you are having issues flashing, try a CM9 based CWM:
What's Currently Broken:
- Face unlock may not work until FFC has been used in the Camera app.
- Market download issues: su, and then killall drmserver in the terminal (needs to be done after each reboot if you are still having issues)
- ... Let me know what else
If you like what I do, hit thanks or donate to a poor college student28Changelog:
2012-03-23
- Resync with CM9 upstream (new boot animation and some other stuff)
- More work on video decoding (but still not 100%)
- Added Torch
- Resync with CM9 upstream (updated graphics code)
- Fixed video decoding issues (can someone test Netflix for me? Flash video seems to work).
- MMS should work
- GSM might work?
- Merged in AOSP 4.0.4 (not official CM merge though...)
- If you have too many issues go back to 3/28 build
- Official CM 4.0.4 merge + dialer fix, resync'd
- Updated CM kernel built with gcc 4.7 (source)
- Updated to latest CM code (but not too many changes)
- Updated Skia Graphics Engine to latest in AOSP master (not merged into CM yet, but I posted on their gerrit).
- Updated to latest CM code.
- Compass arrows in Google Maps should work
- Camcorder should work when in SD (480p) mode
- Updated to latest CM code
- Included some Advanced Dialer Settings link
- Built with Sun/Oracle Java instead of OpenJDK. Also, set javac to target 1.6 instead of 1.5. One of those two made things fast
- Hopefully fixes multitouch issues.
- Updated to latest CM code.
- Included Lock Screen Shortcuts and system volume stuff in gerrit.
- Latest CM code.
- Reverted some multitouch stuff (Temple Run won't work, but other multitouch stuff should be better).
- Added new feature from gerrit to add screen lock delay after turning off the screen.
- Plus some other stuff that I can't remember.
- Latest CM code (Theme manager, but currently only System theme).
- Latest CM code.
- Rotating softkeys should stay lit after rotation (may still need autobrightness).
- Latest CM code.
- Rotating softkeys should stay lit even without autobrightness.
- Latest CM code.
- Apollo music player
- Built in kernel fixes Unity3D touchscreen issues (Temple Run should work with built in kernel). I'll update my kernel when I get the chance soon EDIT: v10 should have working Unity3D touch fixed.
- Latest CM code.
- Lockscreen widgets (weather and calendar events)
- Audio fixes (should help with speaker phone and maybe bluetooth)
- Latest CM code.
- Camera flash should work (thanks to CondemnedSoul and whoever found the permission error)
18So I got jellybean/CM10 to build, but there are still lots of issues (no audio, softlights, or sensors). But 3G and GPS and most other things seemed to work.
I'm still really busy with other things, but jellybean will definitely happen for our phone
EDIT: I'm uploading the build to a cm10 folder in my goo.im hosting, but you need to rm camera.msm7x30.so, lights.vivow.so, and sensors.vivow.so in /system/lib/hw/ for it to boot.
Here are some gapps that worked for me:
http://goo.im/apps/teamgummy/gapps-4.1.1-Kejar31-20120713.zip
And my upload will be in http://goo.im/devs/aeroevan/cm10/ but it will take about an hour to finish uploading...18
That still isn't for our device
I'm working on using the new camera blobs, but even those can't just be dropped in. I had to add a few camera parameters in frameworks/base but the preview isn't starting... http://pastebin.com/ZsxsGHcm and the camera app crashes
I have a few ideas, but I had a phone interview today (which went well) so I couldn't break my phone
I've also been working on getting low power audio (LPA) working, but there are still a few bugs there too.
I just sync'd and am doing a fresh build now, but don't expect any magic
There were a few display hal updates, but nothing too big.16
