I don't see why not. If it doesn't, just restore your previous kernel. Make sure you use the latest one, and make sure to use the AOSP-LTE or SAMMY-LTE version depending on whether or not you're using a TW ROM or not.
[KERNEL][05.2][AOSP&SAMMY][APP/OTA/AUDIO] N.E.A.K. Note2 - Wanna Try? (v1.6x)
- Thread starter aristo2jzgte
- Start date
-
- Tags
- development
- Status
That's for Touchwiz ROMs. The AOSP one is for non-Touchwiz ROMs. Make sure you've got the right one.
Xodium
Senior Member
So I flashed 2.0.2, and my screen has that overly sharp appearance that the original Galaxy S had way back when. Furthermore, there seems to be no way to change it. The uNEAK Engine app has no screen tuning controls, and the controls that were formerly in Settings are no longer there. What do?
Voltage control can be reset to defaults by pressing the menu button while in th evoltage control screen. That's the only one that has an option to return to default.
If you want to clear it out and start over, just remove the init.d scripts, and then clear app data.
Probably I'm doing something stupid... T-Mobile Note II, latest CM10.1, downloading NEAK-Note2-1.6x-AOSP-LTE.zip, flashing through TWRP and the phone doesn't boot.
Reflashing CM10.1 with its stock kernel - it boots fine.
What am I doing wrong?
EDIT: Nevermind, I got confused by the old link in the first post, 2.0.2 version seems to be loading... Would be nice to have the most recent link in the top post though!
Reflashing CM10.1 with its stock kernel - it boots fine.
What am I doing wrong?
EDIT: Nevermind, I got confused by the old link in the first post, 2.0.2 version seems to be loading... Would be nice to have the most recent link in the top post though!
Last edited:
Choose the correct version of the kernel for LTE/international versions of the Note 2 as well as TW/AOSP versions of each one.
I tried this and when it rebooted I just had a black screen. I tried twice and then reinstalled the ROM over it. Any ideas?
Kermit Woodall
1. Is your ROM AOSP based or Touchwiz based?
2. What is the model number of your device?
Rootbox ROM - based on AOSP, AOKP, PA, etc. A real hybrid ROM.
T-Mobile Note II. SGH-T889.
Kermit Woodall
Any reason why when I flashed this on carbon it shows the kernel is unavailable.
Sent from my SGH-T889 using Tapatalk 2
Sent from my SGH-T889 using Tapatalk 2
- Status
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
33Angry [KERNEL][05.2][AOSP&SAMMY][APP/OTA/AUDIO] N.E.A.K. Note2 - Wanna Try? (v1.6x)
Uploaded with ImageShack.us
The Lightest Kernel for the N7100/5 Ever Made!!
Features
- Based on Samsung official sources (updated to N8000u1), updated to 3.0.58
- Governors: PegasusQ (default), Ondemand, LulzactiveV2, Performance, Conservative (module), Lazy (module)
- Schedulers: BFQv5, Noop, SIO, VR (default)
- Using JRCU (++smoothness, ++responsiveness)
- XZ Compression only for KERNEL (--size)
- Fully compatible with: uNEAK ENGINE, MC Manager, Tegrak's Lulzactive app, Voltage Control, SetCPU, NSTools
- Fully compatible with 4.1.2 ROMs
- Fixed exynos-mem bug exploit (thx to Sammy)
- Fixed SDS death bug (thx to Sammy)
- Wolfson Audio Control (thx to AndiP for the implementation) ----> featured in uNEAK Engine
RAMDISK AND MISC:
- LED Fade support (thx to teamhacksung)
- Init.d Support
- CIFS and FUSE built in the kernel (no modules)
- Android Logger (logcat) already enabled into the kernel
- Multi-Core Interface (renewed Tegrak's 2ndCore) -----> CLICK HERE for infos
- FSync Control Interface (thx to Ezekeel - featured into uNEAK Engine)
- TouchBooster Control (thx to franciscofranco)
- CM10.1 and derivates support (AOSP)
CPU/GPU:
- NO OC!!!! (200-1600Mhz)
- CPU Undervolt support (thx to netarchy, Entropy512 & AndreiLux)
- Complete control of freqs/voltages with Voltage Control/SetCPU/uNEAK
- GPU Overclock/Undervolt & Stepcount Interface (by gm & AndreiLux)
- Charging current interface support (original by gm, ported by me) ----> AC, USB, MISC and DOCK supported
MEMORY & PERFORMACES:
- ARM CPU Topology + Sched_MC (can be enabled via uNEAK Engine, disabled by default)
- SLQB Memory Allocator (better memory management)
- Improved memory management functions
- Allow CPU Unaligned access (++performaces)
- AFTR ARM Idle Mode (enable via uNEAK Engine) (++battery)
CONNECTIVITY TWEAKS:
- Stochastic Fair Blue NET Scheduler
- Proportional Rate Reduction for TCP
- Reduced debugging WiFi/BT
- TCP/IP Tweaks
- TCP buffer tweaks
OPTIMIZATIONS:
- NO EXFAT SUPPORT (do not even ask for it please)
- Heavily reduced debug system (logcat and last_kmsg support is still there) (++speed, --size)
- Heavily Optimised TouchBooster logic ----> greatly improved smoothness
- SW Sync framework support
- Using Standalone Hotplug driver with non-hotplug governors (thx to gm)
- 3 CPU cores OFF when screen is locked (thx to arighi for original implementation) ----> with non-hotplug govs
- Upstream patches and fixes from Linux mainline kernel
- Compiled with Linaro GCC 4.7 (2012.12) + NEAK CFLAGS (heavily optimised) + Graphite Optimisations
- Optimised EXT4 filesystem
- Generally optimised code (removed useless functions and variables, fixed warnings)
and many others...
N7100 GSM RELEASES:
v1.6x SAMSUNG FWs & Derivates Zip:: http://code.google.com/p/neak-kerne...il?name=N.E.A.K-Note2-1.6x-SAMMY.zip&can=2&q=
v1.6x SAMSUNG FWs & Derivates TAR: http://code.google.com/p/neak-kerne...il?name=N.E.A.K-Note2-1.6x-SAMMY.tar&can=2&q=
v1.6x CM10/CM10.1 & Derivates Zip: http://code.google.com/p/neak-kerne...ail?name=N.E.A.K-Note2-1.6x-AOSP.zip&can=2&q=
v1.6x CM10/CM10.1 & Derivates TAR: [urlhttp://code.google.com/p/neak-kernel-note2/downloads/detail?name=N.E.A.K-Note2-1.6x-AOSP.tar&can=2&q=[/url]
N7105 LTE RELEASES: "For T-mobile T889"
v1.6x SAMSUNG FWs & Derivates Zip: http://code.google.com/p/neak-kerne...ame=N.E.A.K-Note2-1.6x-SAMMY-LTE.zip&can=2&q=
v1.6x SAMSUNG FWs & Derivates TAR: http://code.google.com/p/neak-kerne...ame=N.E.A.K-Note2-1.6x-SAMMY-LTE.tar&can=2&q=
v1.6x CM10.1 & Derivates Zip: http://code.google.com/p/neak-kerne...name=N.E.A.K-Note2-1.6x-AOSP-LTE.zip&can=2&q=
v1.6x CM10.1 & Derivates TAR: http://code.google.com/p/neak-kerne...name=N.E.A.K-Note2-1.6x-AOSP-LTE.tar&can=2&q=
CHANGELOG
v1.6x (AOSP&SAMMY):
Quote:
KERNEL:
- Should solve all the battery drain issues (hopefully)
- Reverted some patch related to cpuidle and workqueue
- Dynamically adjust cpufreq_max_limit according to scaling_max (Yank555)
RAMDISKS:
- Updates and refactorings of post-init tweaks (thx to dorimanx)
v1.5x (AOSP&SAMMY):
Quote:
KERNEL:
- Updated to Linux 3.0.61
- Updated Wolfson Sound to 1.4.9
- Should fix many mic problems (not tested tho)
- BFQ updated to v5r1
- Reworked voltages interface (thx to AndreiLux)
- wakelock: use single threaded workqueueus
RAMDISKS:
- Updated CM10.1 ramdisks (AOSP)
MISC:
- Now releasing LTE AOSP version (AOSP)
RAMDISKS:
- post-init: allowing any kind of init.d script name
- Updated CM10.1 ramdisks
MISC:
- Works with newest CM10.1 and derivates
Please give all credits and thanks to "Simone201" this is his kernal, He was kind of enough to let me share his kernal to all of us!33
FYI If you are using Carbon the Voodoo app will no longer work but you can get the uNEAK app on the market to control Wolfson (voodoo)
Sent By An Idiot With A Phablet!
New posts
-
How To Guide How to install latest build of UN1CA for A54.- Latest: tommyzc1705
-
-
