okay i read almost everything every source i could find but when i flash the new recovery i,g through fastboot it is staying thesame when i check the version in rom manager which is 3.0.0.7 if thats of any help.
hope some one can show me some directions...
ok perform these checks first..
are you rooted?
do you have s-off? (boot into bootloader and check that in the top it says s-off)
a nice to have...and very great to have if you ought to have good battery on any rom ... do you have a new radio img ?
(recommended radio is this
http://www.multiupload.com/VPTKWUWXRF ie (Radio_12.28e.60.140f_26.04.02.17_M2) )
If you want to know how to flash a radio..i recommend to first have a look at the first post in
http://xdaforums.com/showthread.php?t=877295
Also for successfully flashing any radio you must be in a HTC sense rom (any will do (leedroids, stock etc..)
if yes to all of the above..then proceed.
Do you have android sdk? if not download it..and make sure you have adb in your pc it should be under android_sdk/platform-tools/adb
To get android sdk go to
http://developer.android.com/sdk/index.html
Make sure you download the recovery provided by Kali on the first post (unzip and get the recovery.img file and save it in your platform-tools directory
You also need fastboot on your pc (ideally install this in the same platform-tools directory) you can get it for your OS here
http://developer.htc.com/adp.html
Then to flash connect your device to your pc..make sure is just in charging mode. Make sure adb can read your device to do this..
1) adb devices
2) If adb displays your device serial number..in your console then proceed.
3) type in your terminal (cmd prompt) adb reboot bootloader
4) make sure your devices reboots into bootloader mode. it should say fastboot in red
5) now use fastboot command
6) go to your platform-tools directory and type fastboot flash recovery recovery.img
7) hit enter key...and it should then say
8) sending recovery (xxxx KB) OKAY
writing recovery ... OKAY
9) then it means is all done..you have new recovery!
10) you can then go into recovery and flash CM7!