I'm undervolted by -75mV and it's all good
Sent from the One u wish u had
Same here!
Sent from my HTC One XL using Tapatalk 2
I'm undervolted by -75mV and it's all good
Sent from the One u wish u had
How do you know if yer under volted? I didn't see it in aroma, and setcpu doesn't say
Im undervolted at -25, oc @ 1.7 ghz now with no issues, and i must say i am getting amazing batt life!!!
Sent from my HTC One XL using xda premium
Have you tried that latest kernel without CPU and GPU OC?Getting the lockscreen locking up one me.
However i can still power off/on the screen.
Also what application you using to set voltages.
Best battery and the best performance I have ever had.....thanks
Sent from my HTC One XL using xda premium
What's the name of the first benchmark you're using?
Sent from my HTC One X using xda premium
Thought this was worth posting, 4.1 beastmode, 2.1ghz, +75mv, viper rom,
Sent from my HTC One XL using xda premium
I just flashed 4.2. Is it supposed to default to badass governor?
And another quick question, what would help the phone not get so hot during use, under volting or over volting?
---------- Post added at 06:45 AM ---------- Previous post was at 06:38 AM ----------
I notice that if I set both cores to smartassV2 then it will stay at the max frequency and not move at all. It's almost like it's set to performance.
Edit: Yea, it's really weird. Now I'm not sure if any of the governors are working right. As soon as I set both the smartassv2 it makes cpu0 stay at max speed. Even after I change the cpu1 to ondemand or something else the cpu0 is still stuck at max. If I change cpu0 to ondemand and cpu1 to ondemand it's not stuck anymore. If I leave cpu1 on ondemand and change cpu1 to smartassv2 then it seems like it's ok but now I'm really not sure if it's even correct. I'm trying to explain it the best I can. I'm really tired. Maybe I'll try to explain better after I get some sleep.
For those that are using Viper, which kernal has given you the best battery life?
Stock or beast mode? After using CM10 for a several weeks I am moving back to sense (great rom, battery life seems unstable compared to sense roms. Can't wait for h8 to finish work on the kernal)
Sent from my HTC One XL using Tapatalk 2
A kernel is the lowest level of easily replaceable software that interfaces with the hardware in your computer. It is responsible for interfacing all of your applications that are running in “user mode” down to the physical hardware, and allowing processes, known as servers, to get information from each other using inter-process communication (IPC).
startdelay = time until mpdecision starts doing it's magic (70000)
delay = time between checks (500)
pause = if something else plugs in the cpu, fall asleep for 10000
scroff_single_core = if the screen is off, don't plug in cpu1 (1)
nwns_threshold_up = runqueue threshold, if this is reached cpu1 will be hotplugged (35)
nwns_threshold_down = runqueue threshold, if this is reached cpu1 will be unplugged (5)
twts_threshold_up = time threshold, this amount of time must have passed (250)
twts_threshold_down = same as above (250)
enabled = enable(1) or disable(0) mpdecision. This does not affect scroff_single_core!
idle_freq = a value against that will be checked if a core +/- is requested. (486000)
If cpu0 is below that value and a core up of cpu1 is requested, nothing will happen.
If cpu1 is above that value and a core down of cpu1 is requested, nothing will happen. (otherwise it would now put down cpu1 even though it is still working)
ARM Topology allows individual queue'ing of tasks to cores by the scheduler, For intelligent load balancing and more data crunching power. This has come from the Linaro Team you can view the most recent patch at from http://patches.linaro.org/9894/ all patches at http://patches.linaro.org/project/linux-arm-kernel/
adb shell dmesg > errorreportdump.txt
this will spawn a .txt file in the directory your shell is in upload this file this will suffice for a stacktrace
[CENTER][B]CHANGE LOG[/B]
[b] Beastmode Evita Plus RC1.0[/b]
-Jelly Bean 3.4.10 Source
-Msm_mpdecision added most upstream version
-Msm_thermald added most upstream version
-Sweep2wake with programmable start/end key
-Userspace UV controle
-3D Gpu overclock up to 512mhz
-2D Gpu overclock up to 325mhz
-CPU OC avail up to 1.9ghz
-L2 Cache Boosted
-FSB bus increased
-LOTS of scheduler mods to increase performance
-ARM Topology updated
-Intellidemand, Lionheart and Badass governors added
-FIOPS, ROW, SIO schedulers
-Userspace FSYNC Toggle in /sys
-Fsync tweaks
-WP switch toggled so system is r/w
-Init.d Support
-Cmdline interfacing
-Zram ported from 3.6 linux kernel and enabled
-Enabled Faster PVS bin
[b]Beastmode RC5[/b]
-Added Cmdline interface
-Added fully aroma controlled install - Thanks Bigwillyg/Showp/Faux123
-Adjusted FSB clock
-Adjusted GPU OC so it is fully controlled by aroma
[B]Beastmode 4.4[/B]
-Sweep2wake disabled by default use kernel tuner to enable
-Patched upstream to 3.0.52 - C.G/KeRnElCheF did the hard work of fixing the kernel.org patchi just cherrypicked his git
-Fixes for -O3 Compiling - Thanks BigWillyG for posting your fixes for this
-Altered GPU Clocking/scaling in system
-Changed FSB Clocks increased a bit
-Changed L2 Cache boost stepping
-Altered s2w to have C.G/KeRnElChIeF's /sys start/end mod for sweep2wake - Thanks alot for posting this and giving permission to use. Your work is awesome :D
[B]Beastmode 4.3[/B]
-Patched upstream to 3.0.51
-Fixed Framebuffer Overruns
-Fixed Voltages
-Fixed Graphical Glitching
-Fixed OTG support
-Fixed incorrect MDP formats for unpack patterns
-Fixed Race between DBS_Refresh and hotplug
-Made the Scaling_governor sysfs node polable
-Fixed Sysfs Deadlock on Cocurrent hotplug/freq switch
-Forcing use of insecure mode to RIVA (wifi controller to load my modules)
-Powered OTG (thanks eak1080!)
-Built with -O2 flags
-Corrected mdp_iommu
-Enable ALL iommu's
-added a psuedo planar output for interleaved format
[B][CENTER]BeastMode 4.2[/CENTER][/B]
-Patched in linaro's topology drivers from
http://patches.linaro.org/9894/
all patches at http://patches.linaro.org/project/linux-arm-kernel/
[B][CENTER]BeastMode v4.1[/CENTER][/B]
- incremental update
- Fixed GPU scaling issues
- Smoothass removed for now
- Restored stock qualcomm voltage tables
- Linaro 4.7 toolchain used to compile
- I know aroma still says 4.0 the next full release i will update the installer
[B][CENTER]BeastMode v4.0[/CENTER][/B]
- Sweep2wake added
- ThermalD userspace interface added
- Mpdecision moved to kernelside
- Fixed Voltage tables
- S-On Friendly installer WORKING WITH NEW HBOOT!
- Updated aroma to v2.56 fixes touch issues in the installer
[B][CENTER]BeastMode v3.0[/CENTER][/B]
-Will Update this sortly. Check my github source for channel log
[B][CENTER]BeastMode v2.1[/CENTER][/B]
-Added Aroma Options:
--OC Min
--GPU OC
-New Flashing Method (thanks Scott)
-Cleaned Up Scripts
-Fixed OC on First Boot
[CENTER][B] BeastMode v2.0.1 [/B][/CENTER]
-Fixed Recovery Loops
[B][COLOR="Red"]Note: Refer to post 3 on my thread on themikmik.com for recovery loop fix.[/COLOR][/B]
[CENTER][B] BeastMode v2.0 [/B][/CENTER]
-Updated to 1.91 Base (All Previous Mods Applied)
-Fixed OC Stick Bug
-Added Aroma Installer for Custom OC
-Fixed Install (One .zip Only)
[CENTER][B] BeastMode v1.1 [/B][/CENTER]
-OC now MAX 2.1Ghz MIN .192Ghz
-OCed GPU
-Added Simple I/O Scheduler
-Dimmed Capcitive Buttons
-UVed
-Tweaks for Battery Saving
-Added Interactive Governor
And Much More :)[/CENTER]
Sorry for the delay with this, here is something that might help those who cannot fully boot on this kernel...
https://dl.dropbox.com/u/6621763/HTC_EVO_4G_LTE_Kernel_Voltage_Stabilizer.zip
It increases the voltage all across the board by 75mv.
To remove the mod
https://dl.dropbox.com/u/6621763/HTC_EVO_4G_LTE_Kernel_Voltage_Stabilizer_Remover.zip
I am using XYZ ROM and my Camera Doesn't work?Im on the new JB kernel and my WiFi Says ERROR... what do i do!?!?!
-please download attached prima_wlan.ko.zip unzip and place the prima_wlan.ko into /system/lib/modules/ and set permissions to 744
It seems the Sense Task Manager app isn't functioning properly after flashing v4.3. Is this the case for anyone else??
IOMMU
IOMMU
IOMMU
IOMMU
http://en.wikipedia.org/wiki/IOMMU
http://askubuntu.com/questions/85776/what-is-iommu-and-will-it-improve-my-vm-performance
it is working just fine
the memory is handled ALOT differently now