[KERNEL] SpeedMod Froyo [K13E HPCall VoodooSnd7 SharpnessFix STABLE]

Search This thread
By:
Advanced…
S

stuins

Member
Nov 30, 2009
15
0
I have doc froyo xxjpo v7.5 and your H1 kernel and when my phone is off, and in charge, when the battery is full, every 5 minutes phone vibrate and screen on. during night is terrible. Is a kernel problem or rom problem? I have all tweak on and lagfix with this config: ext4 ext4 ext4 ext2 ext2 ext2 bind disable.
thanks
 
dupel

dupel

Senior Member
Jun 2, 2010
1,394
23
London
stuins said:
I have doc froyo xxjpo v7.5 and your H1 kernel and when my phone is off, and in charge, when the battery is full, every 5 minutes phone vibrate and screen on. during night is terrible. Is a kernel problem or rom problem? I have all tweak on and lagfix with this config: ext4 ext4 ext4 ext2 ext2 ext2 bind disable.
thanks
Click to expand...
Click to collapse

ROM problem. Id recommend a backup and factory reset.
 
H

hardcore

Senior Member
Sep 12, 2006
3,435
7,992
stuins said:
I have doc froyo xxjpo v7.5 and your H1 kernel and when my phone is off, and in charge, when the battery is full, every 5 minutes phone vibrate and screen on. during night is terrible. Is a kernel problem or rom problem? I have all tweak on and lagfix with this config: ext4 ext4 ext4 ext2 ext2 ext2 bind disable.
thanks
Click to expand...
Click to collapse
Not having that problem. Could be some app that's causing it.


Sent from my GT-I9000 using XDA App
 
corgar

corgar

Senior Member
Oct 12, 2010
1,062
118
Rome
without any lagfix, standard rfs, 3g on, 1 hours and battery is still at 100%. v h1 250hz
 
Idan73

Idan73

Senior Member
Jul 19, 2010
2,770
749
Do not reset docs 7.5 from clckwork as some have reported not being to wake up from it. Just to be safe flash full firmware then reset.

Sent from my i9000M
 
Mopral

Mopral

Senior Member
Jan 6, 2009
1,572
343
Saint-Brieuc
I'm on Doc's 7.5 JPO with your H1 kernel and just startup tweaks

Idle for 6 hour with wifi/3g/BT off and just 2g on: battery drain is 1%

Then I switch wifi on and battery drain is 8% for the 2 past hours

I start to think that JPP modem is crape...
 
Last edited:
coldhandz

coldhandz

Senior Member
Oct 1, 2010
214
21
dupel said:
Had 4% drain these past 2 nights with wifi and sync. Very good results.

Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse

Hi Dupel, just to confirm are you running the vH1 250hz? any tweaks enabled?
I'm interested in flashing it over the vC2 250hz currently installed.
Cheers mate
 
st4rk

st4rk

Senior Member
Aug 19, 2007
747
90
London
Mopral said:
I'm on Doc's 7.5 JPO with your H1 kernel and just startup tweaks

Idle for 6 hour with wifi/3g/BT off and just 2g on: battery drain is 1%

Then I switch wifi on and battery drain is 8% for the 2 past hours

I start to think that JPP modem is crape...
Click to expand...
Click to collapse

I'm thinking the same.. Left 3g on over night and dropped about 40% nothing else was on on the phone..
 
P

Phandroid

Senior Member
Aug 24, 2010
160
8
Yeah, my battery drain also became creepy after applying this kernel. Charging to 100% and deleting battery cache improved the situation slightly.

The weirdest thing is that Quadrant stopped working - it hangs during file system benchmark. What's that all about?

EDIT: Forgot to mention that in the battery stats the display shows prominent 96% to 98% usage. Does this by any chance has something to do with the sharpness tweeks?
 
Last edited:
S

sKweezr

Senior Member
Dec 3, 2008
80
6
ludow said:
Yes, I tried. But I did not get it. Sorry for asking. :)

It seems this forum is for 3l1t3z only lol. I don't dare ask anymore. :cool:
Click to expand...
Click to collapse

No offense dude, but if the explanation in this thread isn't clear to you maybe you should be a little bit careful flashing roms. Just to avoid bricking your phone.

Because that's what happened to me before I really read into it :D
 
E

EarlZ

Senior Member
Jun 21, 2010
6,290
327
android.francis said:
@EarlZ - any guess on when the SE froyo will be released? I want to test the radio of that firmware plus the battery drain of that ROM when I use this speedmod kernel.
Click to expand...
Click to collapse

Officially no idea, I have a contact thought that already has the official 2.2 for Ph.. I just need to know how to dump the files from the phone so we can flash it.. or just wait.
 
android.francis

android.francis

Senior Member
Sep 11, 2010
392
32
Cebu
EarlZ said:
Officially no idea, I have a contact thought that already has the official 2.2 for Ph.. I just need to know how to dump the files from the phone so we can flash it.. or just wait.
Click to expand...
Click to collapse

Do let me know if you are able to grab hold of this ROM but no worries, I can wait for it to be released or when samfirmware posts it on their site.

Thanks for the update man :)
 
You must log in or register to reply here.

Similar threads

H
[KERNEL] SpeedMod Gingerbread [K17-3 XWJW8 Value Pack CWM EXT4]
Replies
3K
Views
2M
saszseb
saszseb
stratosk
[KERNEL] Semaphore 2.7.4 (CF-Root + Voodoo Snd v10 + OC/UV + BLN)
Replies
8K
Views
2M
P
Patryk2003
Tk-Glitch
[KERNEL][CM7/MIUI][03/01/12] Glitch V13.1 - OC/UV - Voodoo - Glitchy Speed
Replies
6K
Views
1M
ajeesh vijayan
ajeesh vijayan
stratosk
[KERNEL] Semaphore JB 3.3.0 / KK 3.4.3
Replies
8K
Views
2M
F
fathi48
Lukiqq
[KERNEL] GALAXIAN [344MB][JVU][Voodoo Sound][EXT4][BLN][COLOR]
Replies
7K
Views
2M
Occasus
Occasus

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 525
    H
    hardcore
    Hi people. This kernel aims to be fast, compatible, stable, and have good battery life. It makes our Galaxy S run the way it should.

    This kernel is for the International Galaxy S (I9000) and Bell Mobility Vibrant (I9000M)

    The SpeedMod kernel for the AT&T Captivate is available here: http://xdaforums.com/showthread.php?t=893880

    Note: Only lagfixes using EXT4 are robust. Other lagfixes run the risk of data loss on freezing, hard-reboots, or sudden power loss.

    WARNING: Before you try any lagfix, make sure that you have enough free space on your Internal SD. You should have at least more free space than data+dbdata+cache combined.

    Latest K13E (12-Apr) - Voodoo Sound v7. Lowmemorykiller fixes. Improved display sharpness using AMOLED processing mode in MDNIE. Support for voice calls through headphones. Check here for more info and downloads.

    >>> Click here for the installation procedure using Odin.

    >>> If you have questions, please read the FAQ: Frequently Asked Questions first!

    >>> What is the SpeedMod kernel?

    Latest features:

    - Compiled using codesourcery 2010.09: Faster and more battery efficient
    - The only properly working Tiny RCU implementation, thanks to Paul McKenney
    - More efficient: Removed debug logging from kernel and Android
    - Most updated version of my Enhanced Universal Lagfix fork with improved stability
    - Full Android 2.2.1 ROM compatibility

    This kernel has:

    - Based on JPX Android 2.2.1 kernel source
    - Works on all stock Froyo 2.2 and 2.2.1 ROMs and popular custom ROMs
    - 340MB RAM
    - Enhanced version of sztupy's Universal Lagfix
    - Includes neldar's BackLightNotification 2.3 from https://github.com/project-voodoo/backlightnotification/tree/master/kernel_patches/
    - Sharpness (AMOLED mode) & color fixes for the screen
    - SpeedMod: Replaced kernel jhash2 with jhash3
    - Includes my Startup Tweaks from http://xdaforums.com/showthread.php?t=813309
    - Adjusted kernel HZ value to improve smoothness
    - Uses BFQ IO scheduler by default, from http://algo.ing.unimo.it/people/paolo/disk_sched/sources.php
    - Updated ext4 code in kernel from http://www2.kernel.org/pub/linux/kernel/people/tytso/ext4-patches/
    - Properly working Tiny RCU for better speed and efficiency from http://android.git.kernel.org/?p=ke...it;h=9b1d82fa1611706fa7ee1505f290160a18caf95d
    - Patched lowmemorykiller for compatibility with Tiny RCU from http://android.git.kernel.org/?p=ke...ff;h=5545554aac04918ece318270d63cbfcb015577a9
    - Optimized compiler flags: -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp

    --------------------------------

    FOR BEGINNERS:

    This kernel is based on sztupy's Universal Lagfix: Lagfix and root options are accessible by booting into the Recovery Menu.

    To get the best speed, it is recommended that you enable all Tweaks from the Recovery Menu. Tweaks are under SpeedMod features. Info on Tweaks: http://xdaforums.com/showthread.php?t=813309

    How to root: http://xdaforums.com/showpost.php?p=8896862&postcount=90

    Kernel HZ value: HZ=500 is smoother, HZ=256 is Samsung default.

    --------------------------------

    Memory configs (K10J and later):

    CONFIG_ANDROID_PMEM_MEMSIZE_PMEM=2048
    CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_GPU1=4096
    CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_ADSP=1500
    CONFIG_WLAN_SAMSUNG_MEMSIZE_BCM=256
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC0=12288
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC1=1024
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC2=12288
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC0=32768
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC1=32768
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_TEXSTREAM=10240
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMD=3072

    Memory configs (K10I and earlier):

    CONFIG_ANDROID_PMEM_MEMSIZE_PMEM=4096 *#
    CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_GPU1=8192 *#
    CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_ADSP=1500
    CONFIG_WLAN_SAMSUNG_MEMSIZE_BCM=256
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC0=11264 **
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC1=1024
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC2=11264 **
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC0=30720 ##
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC1=30720 ##
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_JPEG=1024 *#
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_TEXSTREAM=6144 ^^
    CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMD=3072

    ** FIMC0/2 = Below this and 720P video recording won't work
    ## MFC0/1 = Below this and 720P video playback won't work
    *# PMEM/PMEM_GPU1/JPEG = Taken from default values for Galaxy Tab
    ^^ TEXTREAM = Too low and 3G video call stops working

    THANKS: Big thanks to sztupy for his kernel compiler VM and ULFK, lastufo for testing compiler optimizations, ykk_five for testing memory configs, and others who gave ideas or helped.

    --------------------------------

    WARNING: If you use a custom boot animation, apps like One Click Lag Fix will not work because it disables the playlogos1 script hack.

    The files with ending with -CWM are for flashing using Clockwork Recovery.
    These other zip files are for flashing with ODIN.

    --------------------------------

    About USB Mounts:

    >>> Click here to download the USB mount fixes. Latest SpeedMod versions do not need this fix. The fix is for using K12E or older with 2.2 ROMs. It fixes the problem where Internal SD mounts as a read-only drive on the PC, or if the External SD does not get mounted.

    >>> If you have questions, please read the FAQ: Frequently Asked Questions first!

    >>> CLICK HERE to DOWNLOAD the kernels.
    View
    47
    H
    hardcore
    Updated test: K12Q-T7:

    This version is unbelievably smooth!

    Android Logger (logcat) disabled by default (can be re-enabled via Tweaks).
    Kernel debug messages have been disabled.
    Fixed the super loud notifications with Voodoo Sound.

    Changes from K12P:

    - Disabled Android Logger (can be re-enabled via Tweaks)
    - Disabled all kernel debug messages for efficiency
    - Changed boot logo to I897 logo for AT&T Captivate version
    - Changed /cache to ext4nj in recommended ext4 lagfix to fix large Market downloads
    - Optional IPv6 Privacy support in Tweaks
    - Voodoo Sound v2 compatible
    - Fixed loud notification problem with headphones
    - Fixed popping / clicking noise when music and FM radio is stopped / started
    - Better FM Radio sound:
    - - Really removed the high pass filter and DRC from FM Radio (restores full bass)
    - - Turn on 4FS mode for ADC in FM Radio (smoother high frequencies)
    - - Turn on 128x oversampling for ADC and DAC in FM Radio mode
    - Adjusted volume of FM Radio and Media Playback to be similar
    - General sound quality improvements:
    - - Maximized digital mixer output to improve SNR and resolution
    - - 128x oversampling option in Voodoo Sound enabled by default
    - - Explicitly disable DRC and NG during media playback, if +1.5dB mode is NOT selected

    For those people who requested IPv6 privacy, please let me know if it works in this version.
    View
    41
    H
    hardcore
    ashwinds said:
    On 12A, the battery seems better - but only marginally so - i still see Wifi using 35% on a mostly idle phone. If I remember right, the previous usage used to be around 5% - definitely single digit. Something is still wrong with wifi with JPY ROM/Modem....
    Click to expand...
    Click to collapse
    Its not the ROM or modem. I think its the new Wifi firmware. I've started a thread to collect Wifi firmware versions.

    http://xdaforums.com/showthread.php?t=885903

    In the meantime, if you want u can experiment. I've created update.zip packages to update/overwrite the wifi firmware (it's in /system/etc/wifi).

    You can try to use the older (DXJPA) wifi firmware and see how that does in terms of power.
    If you don't like it, you can put back the XXJPY wifi firmware with the other package.

    Let me know your findings, if u try it out.

    DXJPA wifi firmware is working fine with my XXJPY rom. Gonna check out the battery usage.

    FYI:
    DXJPA: Firmware version = wl0: Jun 4 2010 14:21:21 version 4.218.214.3
    XXJPY: Firmware version = wl0: Nov 16 2010 08:56:21 version 4.218.250.38
    View
    26
    H
    hardcore
    K12U was just out, but here is K13A-T1!

    Changes:
    - Single version for neutral/cold/warm color, selectable from Recovery
    - Option to disable darkest auto-brightness level, selectable from Recovery
    - Minor optimizations to brightness sensor driver

    Otherwise it is the same as K12U.
    View
    25
    H
    hardcore
    SpeedMod + Voodoo Sound test version!

    K12L-T5:

    Changes from K12K:
    - Improvements to FM Radio sound: remove Dynamic Range Compression
    - Voodoo Sound v1: FM radio bass fix, controllable headphone output via app
    - rear speaker volume +1 for media
    - light sensor polling interval changed to 2s instead of 0.5s
    (saves battery, more stable brightness levels)
    - light sensor sensitivity adjusted so that the screen doesn't turn bright so easily
    (saves battery and reduces screen burn)
    - adjustments to IO Tweak (super smooth now!)
    - changed battery level polling interval to 60 seconds, from 5 seconds

    Note that you need Supercurio's Voodoo app to adjust the headphone level. If u don't install it, the default level is the same level as K12K (+1 from Nexus S, or +3 from SGS).

    PS. The FM radio sound is really awesome after those voice filters have been removed!
    View

New posts