[rom] Unofficial AOKP for many AllWinner A10 tablets

Search This thread
By:
Advanced…
C

Christian Troy

Senior Member
Sep 25, 2008
535
407
Venice (IT)
let's do things in the old fashioned way (the one i like, not fancy gui that don't let you understand what you're doing)

connect to the tablet through adb and type these commands

Code: 
adb push recovery.img /sdcard/
adb shell
su
cat /sdcard/recovery.img > /dev/block/nandg
sync; sync; sync
echo -n boot-recovery | busybox dd of=/dev/block/nandf count=1 conv=sync; sync

the system will reboot to the new flashed recovery
 
  • Like
Reactions: vikgr and snbakos
love4chat

love4chat

Senior Member
Mar 6, 2012
1,018
236
33
Bhiwandi
Redmi Note 10 Pro
If (- new kernel_ and an old bug : DON'T set brightness too low, your display will go black) Happens!!!

Then What Should We Do To Just Make The Setting Proper Again And Dont Prefer To Go To CWM N Factory Reset,Please Show Any Other Way To Recover The Phone To Normal!!!
 
T

the_knarf

Member
Jul 9, 2012
10
0
A7HD (cherry M-728)

i use this image now but it seems that the resolution is not correct,
with this image the resolution is 961 X 600, but in the original image this is 1024 X 600.
as a result of that i don't see the navigation bar on my desktop.

can i somehow change this?

gr, Frank
 
S

smogtdi

Senior Member
Jul 16, 2012
160
45
Montreal
Is there an "How-to" to help us create custom compatibilty file ?

I have a Onda VX610w v5 and Onda just dropped the support for them.

edit : it's a 7" tablet, no camera, no hdmi, hw keys are "home+menu+back", 512mb, 8gb, 3 axis motion sensor.
I can extract whatever file needed from the latest stock 4.0.3 ICS rom from Onda if it can help.

ft5x_ts touch panel
mma7660 g-sensor
512mb Ram
8gb NAND

lsmod:

Code: 
8192cu 566489 0 - Live 0xbf09e000
rtl8150 8910 0 - Live 0xbf097000
mcs7830 6557 0 - Live 0xbf091000
qf9700 8513 0 - Live 0xbf08a000
asix 22500 0 - Live 0xbf07f000
usbnet 23745 3 mcs7830,qf9700,asix, Live 0xbf073000
sun4i_csi0 26905 0 - Live 0xbf068000
ov7670 10318 0 - Live 0xbf062000
videobuf_dma_contig 5659 1 sun4i_csi0, Live 0xbf05d000
videobuf_core 18067 2 sun4i_csi0,videobuf_dma_contig, Live 0xbf053000
mma7660 5671 0 - Live 0xbf04d000
mali 130147 12 - Live 0xbf020000
ump 42058 21 mali, Live 0xbf00f000
ft5x_ts 41425 0 - Live 0xbf000000


here is the stock script.fex ;

Code: 
[product]
version	= "1.0"
machine	= "A10-EVB-V1.1"

[target]
power_start	= 0
boot_clock	= 1008
dcdc2_vol	= 1400
dcdc3_vol	= 1250
ldo2_vol	= 3000
ldo3_vol	= 2800
ldo4_vol	= 2800

[card_burn_para]
card_no	= 0
card_line	= 4
card_mode	= 0
sdc_d1	= port:PF00<2><1><default><default>
sdc_d0	= port:PF01<2><1><default><default>
sdc_clk	= port:PF02<2><1><default><default>
sdc_cmd	= port:PF03<2><1><default><default>
sdc_d3	= port:PF04<2><1><default><default>
sdc_d2	= port:PF05<2><1><default><default>

[card_boot]
logical_start	= 40960
sprite_gpio0	=

[card_boot0_para]
card_ctrl	= 0
card_high_speed	= 1
card_line	= 4
sdc_d1	= port:PF00<2><1><default><default>
sdc_d0	= port:PF01<2><1><default><default>
sdc_clk	= port:PF02<2><1><default><default>
sdc_cmd	= port:PF03<2><1><default><default>
sdc_d3	= port:PF04<2><1><default><default>
sdc_d2	= port:PF05<2><1><default><default>

[card_boot2_para]
card_ctrl	= 2
card_high_speed	= 1
card_line	= 4
sdc_cmd	= port:PC06<3><1><default><default>
sdc_clk	= port:PC07<3><1><default><default>
sdc_d0	= port:PC08<3><1><default><default>
sdc_d1	= port:PC09<3><1><default><default>
sdc_d2	= port:PC10<3><1><default><default>
sdc_d3	= port:PC11<3><1><default><default>

[twi_para]
twi_port	= 0
twi_scl	= port:PB00<2><default><default><default>
twi_sda	= port:PB01<2><default><default><default>

[uart_para]
uart_debug_port	= 0
uart_debug_tx	= port:PB22<2><1><default><default>
uart_debug_rx	= port:PB23<2><1><default><default>

[jtag_para]
jtag_enable	= 0
jtag_ms	= port:PF00<4><default><default><default>
jtag_ck	= port:PF01<4><default><default><default>
jtag_do	= port:PF03<4><default><default><default>
jtag_di	= port:PF05<4><default><default><default>

[dram_para]
dram_baseaddr	= 0x40000000
dram_clk	= 432
dram_type	= 3
dram_rank_num	= 1
dram_chip_density	= 2048
dram_io_width	= 16
dram_bus_width	= 32
dram_cas	= 6
dram_zq	= 0x7b
dram_odt_en	= 0
dram_size	= 512
dram_tpr0	= 0x30926692
dram_tpr1	= 0x1090
dram_tpr2	= 0x1a0c8
dram_tpr3	= 0x0
dram_tpr4	= 0x0
dram_tpr5	= 0x0
dram_emr1	= 0x0
dram_emr2	= 0x0
dram_emr3	= 0x0

[mali_para]
mali_used	= 1
mali_clkdiv	= 3

[g2d_para]
g2d_used	= 1
g2d_size	= 0x1000000

[emac_para]
emac_used	= 0
emac_rxd3	= port:PA00<2><default><default><default>
emac_rxd2	= port:PA01<2><default><default><default>
emac_rxd1	= port:PA02<2><default><default><default>
emac_rxd0	= port:PA03<2><default><default><default>
emac_txd3	= port:PA04<2><default><default><default>
emac_txd2	= port:PA05<2><default><default><default>
emac_txd1	= port:PA06<2><default><default><default>
emac_txd0	= port:PA07<2><default><default><default>
emac_rxclk	= port:PA08<2><default><default><default>
emac_rxerr	= port:PA09<2><default><default><default>
emac_rxdV	= port:PA10<2><default><default><default>
emac_mdc	= port:PA11<2><default><default><default>
emac_mdio	= port:PA12<2><default><default><default>
emac_txen	= port:PA13<2><default><default><default>
emac_txclk	= port:PA14<2><default><default><default>
emac_crs	= port:PA15<2><default><default><default>
emac_col	= port:PA16<2><default><default><default>
emac_reset	= port:PA17<1><default><default><default>

[twi0_para]
twi0_used	= 1
twi0_scl	= port:PB00<2><default><default><default>
twi0_sda	= port:PB01<2><default><default><default>

[twi1_para]
twi1_used	= 1
twi1_scl	= port:PB18<2><default><default><default>
twi1_sda	= port:PB19<2><default><default><default>

[twi2_para]
twi2_used	= 1
twi2_scl	= port:PB20<2><default><default><default>
twi2_sda	= port:PB21<2><default><default><default>

[uart_para0]
uart_used	= 1
uart_port	= 0
uart_type	= 2
uart_tx	= port:PB22<2><1><default><default>
uart_rx	= port:PB23<2><1><default><default>

[uart_para1]
uart_used	= 0
uart_port	= 1
uart_type	= 8
uart_tx	= port:PA10<4><default><default><default>
uart_rx	= port:PA11<4><default><default><default>
uart_rts	= port:PA12<4><default><default><default>
uart_cts	= port:PA13<4><default><default><default>
uart_dtr	= port:PA14<4><default><default><default>
uart_dsr	= port:PA15<4><default><default><default>
uart_dcd	= port:PA16<4><default><default><default>
uart_ring	= port:PA17<4><default><default><default>

[uart_para2]
uart_used	= 0
uart_port	= 2
uart_type	= 4
uart_tx	= port:PI18<3><default><default><default>
uart_rx	= port:PI19<3><default><default><default>
uart_rts	= port:PI16<3><default><default><default>
uart_cts	= port:PI17<3><default><default><default>

[uart_para3]
uart_used	= 0
uart_port	= 3
uart_type	= 4
uart_tx	= port:PH00<4><default><default><default>
uart_rx	= port:PH01<4><default><default><default>
uart_rts	= port:PH02<4><default><default><default>
uart_cts	= port:PH03<4><default><default><default>

[uart_para4]
uart_used	= 0
uart_port	= 4
uart_type	= 2
uart_tx	= port:PH04<4><default><default><default>
uart_rx	= port:PH05<4><default><default><default>

[uart_para5]
uart_used	= 0
uart_port	= 5
uart_type	= 2
uart_tx	= port:PH06<4><default><default><default>
uart_rx	= port:PH07<4><default><default><default>

[uart_para6]
uart_used	= 0
uart_port	= 6
uart_type	= 2
uart_tx	= port:PA12<4><default><default><default>
uart_rx	= port:PA13<4><default><default><default>

[uart_para7]
uart_used	= 0
uart_port	= 7
uart_type	= 2
uart_tx	= port:PA14<4><default><default><default>
uart_rx	= port:PA15<4><default><default><default>

[spi0_para]
spi_used	= 0
spi_cs0	= port:PI10<3><default><default><default>
spi_cs1	= port:PI14<3><default><default><default>
spi_sclk	= port:PI11<3><default><default><default>
spi_mosi	= port:PI12<3><default><default><default>
spi_miso	= port:PI13<3><default><default><default>

[spi1_para]
spi_used	= 0
spi_cs0	= port:PA00<4><default><default><default>
spi_cs1	= port:PA04<4><default><default><default>
spi_sclk	= port:PI01<4><default><default><default>
spi_mosi	= port:PI02<4><default><default><default>
spi_miso	= port:PI03<4><default><default><default>

[spi2_para]
spi_used	= 0
spi_cs0	= port:PC19<3><default><default><default>
spi_cs1	=
spi_sclk	= port:PC20<3><default><default><default>
spi_mosi	= port:PC21<3><default><default><default>
spi_miso	= port:PC22<3><default><default><default>

[spi3_para]
spi_used	= 0
spi_cs0	= port:PA05<4><default><default><default>
spi_cs1	= port:PA09<4><default><default><default>
spi_sclk	= port:PI06<4><default><default><default>
spi_mosi	= port:PI07<4><default><default><default>
spi_miso	= port:PI08<4><default><default><default>

[rtp_para]
rtp_used	= 0
rtp_screen_size	= 7
rtp_regidity_level	= 7
rtp_press_threshold_enable	= 0
rtp_press_threshold	= 0x1f40
rtp_sensitive_level	= 0xf
rtp_exchange_x_y_flag	= 0

[ctp_para]
ctp_used	= 1
ctp_name	= "ft5x_ts"
ctp_twi_id	= 2
ctp_twi_addr	= 0x38
ctp_screen_max_x	= 800
ctp_screen_max_y	= 480
ctp_revert_x_flag	= 0
ctp_revert_y_flag	= 0
ctp_exchange_x_y_flag	= 0
ctp_int_port	= port:PH21<6><default><default><default>
ctp_reset	= port:PH20<1><default><default><default>
ctp_io_port	= port:PH21<0><default><default><default>

[tkey_para]
tkey_used	= 0
tkey_name	= "hv_keypad"
tkey_twi_id	= 2
tkey_twi_addr	= 0x62
tkey_int	= port:PI13<6><default><default><default>

[motor_para]
motor_used	= 0
motor_shake	= port:PB03<1><default><default><1>

[nand_para]
nand_used	= 1
nand_we	= port:PC00<2><default><default><default>
nand_ale	= port:PC01<2><default><default><default>
nand_cle	= port:PC02<2><default><default><default>
nand_ce1	= port:PC03<2><default><default><default>
nand_ce0	= port:PC04<2><default><default><default>
nand_nre	= port:PC05<2><default><default><default>
nand_rb0	= port:PC06<2><default><default><default>
nand_rb1	= port:PC07<2><default><default><default>
nand_d0	= port:PC08<2><default><default><default>
nand_d1	= port:PC09<2><default><default><default>
nand_d2	= port:PC10<2><default><default><default>
nand_d3	= port:PC11<2><default><default><default>
nand_d4	= port:PC12<2><default><default><default>
nand_d5	= port:PC13<2><default><default><default>
nand_d6	= port:PC14<2><default><default><default>
nand_d7	= port:PC15<2><default><default><default>
nand_wp	= port:PC16<2><default><default><default>
nand_ce2	= port:PC17<2><default><default><default>
nand_ce3	= port:PC18<2><default><default><default>
nand_ce4	=
nand_ce5	=
nand_ce6	=
nand_ce7	=
nand_spi	= port:PC23<3><default><default><default>
nand_ndqs	= port:PC24<2><default><default><default>

[disp_init]
disp_init_enable	= 1
disp_mode	= 0
screen0_output_type	= 1
screen0_output_mode	= 4
screen1_output_type	= 1
screen1_output_mode	= 4
fb0_framebuffer_num	= 2
fb0_format	= 10
fb0_pixel_sequence	= 0
fb0_scaler_mode_enable	= 0
fb1_framebuffer_num	= 2
fb1_format	= 10
fb1_pixel_sequence	= 0
fb1_scaler_mode_enable	= 0

[lcd0_para]
lcd_used	= 1
lcd_x	= 800
lcd_y	= 480
lcd_dclk_freq	= 37
lcd_pwm_freq	= 12000
lcd_pwm_pol	= 1
lcd_if	= 0
lcd_hbp	= 215
lcd_ht	= 1055
lcd_vbp	= 34
lcd_vt	= 1050
lcd_hv_if	= 0
lcd_hv_smode	= 0
lcd_hv_s888_if	= 0
lcd_hv_syuv_if	= 0
lcd_hv_vspw	= 0
lcd_hv_hspw	= 0
lcd_lvds_ch	= 0
lcd_lvds_mode	= 0
lcd_lvds_bitwidth	= 0
lcd_lvds_io_cross	= 0
lcd_cpu_if	= 0
lcd_frm	= 0
lcd_io_cfg0	= 268435456
lcd_gamma_correction_en	= 0
lcd_gamma_tbl_0	= 0x0
lcd_gamma_tbl_1	= 0x10101
lcd_gamma_tbl_255	= 0xffffff
lcd_bl_en_used	= 1
lcd_bl_en	= port:PH07<1><0><default><1>
lcd_power_used	= 1
lcd_power	= port:PH08<1><0><default><1>
lcd_pwm_used	= 1
lcd_pwm	= port:PB02<2><default><default><default>
lcd_gpio_0	=
lcd_gpio_1	=
lcd_gpio_2	=
lcd_gpio_3	=
lcdd0	= port:PD00<2><0><default><default>
lcdd1	= port:PD01<2><0><default><default>
lcdd2	= port:PD02<2><0><default><default>
lcdd3	= port:PD03<2><0><default><default>
lcdd4	= port:PD04<2><0><default><default>
lcdd5	= port:PD05<2><0><default><default>
lcdd6	= port:PD06<2><0><default><default>
lcdd7	= port:PD07<2><0><default><default>
lcdd8	= port:PD08<2><0><default><default>
lcdd9	= port:PD09<2><0><default><default>
lcdd10	= port:PD10<2><0><default><default>
lcdd11	= port:PD11<2><0><default><default>
lcdd12	= port:PD12<2><0><default><default>
lcdd13	= port:PD13<2><0><default><default>
lcdd14	= port:PD14<2><0><default><default>
lcdd15	= port:PD15<2><0><default><default>
lcdd16	= port:PD16<2><0><default><default>
lcdd17	= port:PD17<2><0><default><default>
lcdd18	= port:PD18<2><0><default><default>
lcdd19	= port:PD19<2><0><default><default>
lcdd20	= port:PD20<2><0><default><default>
lcdd21	= port:PD21<2><0><default><default>
lcdd22	= port:PD22<2><0><default><default>
lcdd23	= port:PD23<2><0><default><default>
lcdclk	= port:PD24<2><0><default><default>
lcdde	= port:PD25<2><0><default><default>
lcdhsync	= port:PD26<2><0><default><default>
lcdvsync	= port:PD27<2><0><default><default>

[lcd1_para]
lcd_used	= 0
lcd_x	= 0
lcd_y	= 0
lcd_dclk_freq	= 0
lcd_pwm_freq	= 0
lcd_pwm_pol	= 0
lcd_if	= 0
lcd_hbp	= 0
lcd_ht	= 0
lcd_vbp	= 0
lcd_vt	= 0
lcd_hv_if	= 0
lcd_hv_smode	= 0
lcd_hv_s888_if	= 0
lcd_hv_syuv_if	= 0
lcd_hv_vspw	= 0
lcd_hv_hspw	= 0
lcd_lvds_ch	= 0
lcd_lvds_mode	= 0
lcd_lvds_bitwidth	= 0
lcd_lvds_io_cross	= 0
lcd_cpu_if	= 0
lcd_frm	= 0
lcd_io_cfg0	= 0
lcd_gamma_correction_en	= 0
lcd_gamma_tbl_0	= 0x0
lcd_gamma_tbl_1	= 0x10101
lcd_gamma_tbl_255	= 0xffffff
lcd_bl_en_used	= 0
lcd_bl_en	=
lcd_power_used	= 0
lcd_power	=
lcd_pwm_used	= 1
lcd_pwm	= port:PI03<2><default><default><default>
lcd_gpio_0	=
lcd_gpio_1	=
lcd_gpio_2	=
lcd_gpio_3	=
lcdd0	= port:PH00<2><0><default><default>
lcdd1	= port:PH01<2><0><default><default>
lcdd2	= port:PH02<2><0><default><default>
lcdd3	= port:PH03<2><0><default><default>
lcdd4	= port:PH04<2><0><default><default>
lcdd5	= port:PH05<2><0><default><default>
lcdd6	= port:PH06<2><0><default><default>
lcdd7	= port:PH07<2><0><default><default>
lcdd8	= port:PH08<2><0><default><default>
lcdd9	= port:PH09<2><0><default><default>
lcdd10	= port:PH10<2><0><default><default>
lcdd11	= port:PH11<2><0><default><default>
lcdd12	= port:PH12<2><0><default><default>
lcdd13	= port:PH13<2><0><default><default>
lcdd14	= port:PH14<2><0><default><default>
lcdd15	= port:PH15<2><0><default><default>
lcdd16	= port:PH16<2><0><default><default>
lcdd17	= port:PH17<2><0><default><default>
lcdd18	= port:PH18<2><0><default><default>
lcdd19	= port:PH19<2><0><default><default>
lcdd20	= port:PH20<2><0><default><default>
lcdd21	= port:PH21<2><0><default><default>
lcdd22	= port:PH22<2><0><default><default>
lcdd23	= port:PH23<2><0><default><default>
lcdclk	= port:PH24<2><0><default><default>
lcdde	= port:PH25<2><0><default><default>
lcdhsync	= port:PH26<2><0><default><default>
lcdvsync	= port:PH27<2><0><default><default>

[csi0_para]
csi_used	= 0
csi_mode	= 0
csi_dev_qty	= 1
csi_stby_mode	= 1
csi_mname	= "mt9m112"
csi_twi_id	= 1
csi_twi_addr	= 0x90
csi_if	= 0
csi_vflip	= 0
csi_hflip	= 0
csi_iovdd	= "axp20_pll"
csi_avdd	= "axp20_pll"
csi_dvdd	= ""
csi_flash_pol	= 1
csi_mname_b	= ""
csi_twi_id_b	= 1
csi_twi_addr_b	= 0x78
csi_if_b	= 0
csi_vflip_b	= 1
csi_hflip_b	= 0
csi_iovdd_b	= ""
csi_avdd_b	= ""
csi_dvdd_b	= ""
csi_flash_pol_b	= 1
csi_pck	= port:PE00<3><default><default><default>
csi_ck	= port:PE01<3><default><default><default>
csi_hsync	= port:PE02<3><default><default><default>
csi_vsync	= port:PE03<3><default><default><default>
csi_d0	= port:PE04<3><default><default><default>
csi_d1	= port:PE05<3><default><default><default>
csi_d2	= port:PE06<3><default><default><default>
csi_d3	= port:PE07<3><default><default><default>
csi_d4	= port:PE08<3><default><default><default>
csi_d5	= port:PE09<3><default><default><default>
csi_d6	= port:PE10<3><default><default><default>
csi_d7	= port:PE11<3><default><default><default>
csi_d8	=
csi_d9	=
csi_d10	=
csi_d11	=
csi_d12	=
csi_d13	=
csi_d14	=
csi_d15	=
csi_reset	= port:PH13<1><default><default><0>
csi_power_en	= port:PH16<1><default><default><0>
csi_stby	= port:PH18<1><default><default><0>
csi_flash	=
csi_af_en	=
csi_reset_b	=
csi_power_en_b	=
csi_stby_b	=
csi_flash_b	=
csi_af_en_b	=

[csi1_para]
csi_used	= 0
csi_mode	= 0
csi_dev_qty	= 1
csi_stby_mode	= 1
csi_mname	= ""
csi_twi_id	= 1
csi_twi_addr	= 0xba
csi_if	= 0
csi_vflip	= 0
csi_hflip	= 0
csi_iovdd	= ""
csi_avdd	= ""
csi_dvdd	= ""
csi_flash_pol	= 1
csi_mname_b	= ""
csi_twi_id_b	= 1
csi_twi_addr_b	= 0x78
csi_if_b	= 0
csi_vflip_b	= 1
csi_hflip_b	= 0
csi_iovdd_b	= ""
csi_avdd_b	= ""
csi_dvdd_b	= ""
csi_flash_pol_b	= 1
csi_pck	= port:PG00<3><default><default><default>
csi_ck	= port:PG01<3><default><default><default>
csi_hsync	= port:PG02<3><default><default><default>
csi_vsync	= port:PG03<3><default><default><default>
csi_field	=
csi_d0	= port:PG04<3><default><default><default>
csi_d1	= port:PG05<3><default><default><default>
csi_d2	= port:PG06<3><default><default><default>
csi_d3	= port:PG07<3><default><default><default>
csi_d4	= port:PG08<3><default><default><default>
csi_d5	= port:PG09<3><default><default><default>
csi_d6	= port:PG10<3><default><default><default>
csi_d7	= port:PG11<3><default><default><default>
csi_d8	=
csi_d9	=
csi_d10	=
csi_d11	=
csi_d12	=
csi_d13	=
csi_d14	=
csi_d15	=
csi_d16	=
csi_d17	=
csi_d18	=
csi_d19	=
csi_d20	=
csi_d21	=
csi_d22	=
csi_d23	=
csi_reset	= port:PH14<1><default><default><0>
csi_power_en	=
csi_stby	= port:PH17<1><default><default><0>
csi_flash	=
csi_af_en	=
csi_reset_b	=
csi_power_en_b	=
csi_stby_b	=
csi_flash_b	=
csi_af_en_b	=

[tvout_para]
tvout_used	= 1
tvout_channel_num	= 1
tv_en	= port:PI12<1><default><default><0>

[tvin_para]
tvin_used	= 0
tvin_channel_num	= 4

[tv_out_dac_para]
dac_used	= 1
dac0_src	= 4
dac1_src	= 6
dac2_src	= 5
dac3_src	= 0

[sata_para]
sata_used	= 0
sata_power_en	=

[mmc0_para]
sdc_used	= 1
sdc_detmode	= 1
bus_width	= 4
sdc_d1	= port:PF00<2><1><2><default>
sdc_d0	= port:PF01<2><1><2><default>
sdc_clk	= port:PF02<2><1><2><default>
sdc_cmd	= port:PF03<2><1><2><default>
sdc_d3	= port:PF04<2><1><2><default>
sdc_d2	= port:PF05<2><1><2><default>
sdc_det	= port:PH01<0><1><default><default>
sdc_use_wp	= 0
sdc_wp	=

[mmc1_para]
sdc_used	= 0
sdc_detmode	= 1
bus_width	= 4
sdc_cmd	= port:PH22<5><1><2><default>
sdc_clk	= port:PH23<5><1><2><default>
sdc_d0	= port:PH24<5><1><2><default>
sdc_d1	= port:PH25<5><1><2><default>
sdc_d2	= port:PH26<5><1><2><default>
sdc_d3	= port:PH27<5><1><2><default>
sdc_det	= port:PH02<0><1><default><default>
sdc_use_wp	= 0
sdc_wp	=

[mmc2_para]
sdc_used	= 0

[mmc3_para]
sdc_used	= 0
sdc_detmode	= 1
bus_width	= 4
sdc_cmd	= port:PI04<2><1><2><default>
sdc_clk	= port:PI05<2><1><2><default>
sdc_d0	= port:PI06<2><1><2><default>
sdc_d1	= port:PI07<2><1><2><default>
sdc_d2	= port:PI08<2><1><2><default>
sdc_d3	= port:PI09<2><1><2><default>
sdc_det	= port:PH11<0><1><default><default>
sdc_use_wp	= 0
sdc_wp	=

[ms_para]
ms_used	= 0
ms_bs	= port:PH06<5><default><default><default>
ms_clk	= port:PH07<5><default><default><default>
ms_d0	= port:PH08<5><default><default><default>
ms_d1	= port:PH09<5><default><default><default>
ms_d2	= port:PH10<5><default><default><default>
ms_d3	= port:PH11<5><default><default><default>
ms_det	=

[smc_para]
smc_used	= 0
smc_rst	= port:PH13<5><default><default><default>
smc_vppen	= port:PH14<5><default><default><default>
smc_vppp	= port:PH15<5><default><default><default>
smc_det	= port:PH16<5><default><default><default>
smc_vccen	= port:PH17<5><default><default><default>
smc_sck	= port:PH18<5><default><default><default>
smc_sda	= port:PH19<5><default><default><default>

[ps2_0_para]
ps2_used	= 0
ps2_scl	= port:PI20<2><1><default><default>
ps2_sda	= port:PI21<2><1><default><default>

[ps2_1_para]
ps2_used	= 0
ps2_scl	= port:PI14<3><1><default><default>
ps2_sda	= port:PI15<3><1><default><default>

[can_para]
can_used	= 0
can_tx	= port:PA16<3><default><default><default>
can_rx	= port:PA17<3><default><default><default>

[keypad_para]
kp_used	= 0
kp_in_size	= 8
kp_out_size	= 8
kp_in0	= port:PH08<4><1><default><default>
kp_in1	= port:PH09<4><1><default><default>
kp_in2	= port:PH10<4><1><default><default>
kp_in3	= port:PH11<4><1><default><default>
kp_in4	= port:PH14<4><1><default><default>
kp_in5	= port:PH15<4><1><default><default>
kp_in6	= port:PH16<4><1><default><default>
kp_in7	= port:PH17<4><1><default><default>
kp_out0	= port:PH18<4><1><default><default>
kp_out1	= port:PH19<4><1><default><default>
kp_out2	= port:PH22<4><1><default><default>
kp_out3	= port:PH23<4><1><default><default>
kp_out4	= port:PH24<4><1><default><default>
kp_out5	= port:PH25<4><1><default><default>
kp_out6	= port:PH26<4><1><default><default>
kp_out7	= port:PH27<4><1><default><default>

[usbc0]
usb_used	= 1
usb_port_type	= 2
usb_detect_type	= 1
usb_id_gpio	= port:PH04<0><1><default><default>
usb_det_vbus_gpio	= port:PH05<0><0><default><default>
usb_drv_vbus_gpio	= port:PB09<1><0><default><0>
usb_host_init_state	= 0

[usbc1]
usb_used	= 0
usb_port_type	= 1
usb_detect_type	= 0
usb_id_gpio	=
usb_det_vbus_gpio	=
usb_drv_vbus_gpio	= port:PH06<1><0><default><0>
usb_host_init_state	= 1

[usbc2]
usb_used	= 1
usb_port_type	= 1
usb_detect_type	= 0
usb_id_gpio	=
usb_det_vbus_gpio	=
usb_drv_vbus_gpio	= port:PH03<1><0><default><0>
usb_host_init_state	= 0

[usb_feature]
vendor_id	= 6353
mass_storage_id	= 1
adb_id	= 2
manufacturer_name	= "USB Developer"
product_name	= "Android"
serial_number	= "20080411"

[msc_feature]
vendor_name	= "ONDA MID"
product_name	= "USB 2.0 Driver"
release	= 100
luns	= 2

[gsensor_para]
gsensor_used	= 1
gsensor_name	= "mma7660"
gsensor_twi_id	= 1
gsensor_twi_addr	= 0x4c
gsensor_int1	= port:PH00<6><1><default><default>
gsensor_int2	=

[gps_para]
gps_used	= 0
gps_spi_id	= 2
gps_spi_cs_num	= 0
gps_lradc	= 1
gps_clk	= port:PI00<2><default><default><default>
gps_sign	= port:PI01<2><default><default><default>
gps_mag	= port:PI02<2><default><default><default>
gps_vcc_en	= port:PC22<1><default><default><0>
gps_osc_en	= port:PI14<1><default><default><0>
gps_rx_en	= port:PI15<1><default><default><0>

[sdio_wifi_para]
sdio_wifi_used	= 0
sdio_wifi_sdc_id	= 3
sdio_wifi_mod_sel	= 1
swl_n20_shdn	= port:PH09<1><default><default><0>
swl_n20_host_wakeup	= port:PH10<1><default><default><1>
swl_n20_vdd_en	= port:PH11<1><default><default><0>
swl_n20_vcc_en	= port:PH12<1><default><default><0>

[usb_wifi_para]
usb_wifi_used	= 1
usb_wifi_usbc_num	= 2

[3g_para]
3g_used	= 0
3g_usbc_num	= 2
3g_uart_num	= 0
3g_pwr	=
3g_wakeup	=
3g_int	=

[gy_para]
gy_used	= 0
gy_twi_id	= 1
gy_twi_addr	= 0
gy_int1	= port:PH18<6><1><default><default>
gy_int2	= port:PH19<6><1><default><default>

[ls_para]
ls_used	= 0
ls_twi_id	= 1
ls_twi_addr	= 0
ls_int	= port:PH20<6><1><default><default>

[compass_para]
compass_used	= 0
compass_twi_id	= 1
compass_twi_addr	= 0
compass_int	= port:PI13<6><1><default><default>

[bt_para]
bt_used	= 0
bt_uart_id	= 2
bt_mod_type	= 1

[i2s_para]
i2s_used	= 0
i2s_channel	= 2
i2s_mclk	= port:PB05<2><1><default><default>
i2s_bclk	= port:PB06<2><1><default><default>
i2s_lrclk	= port:PB07<2><1><default><default>
i2s_dout0	= port:PB08<2><1><default><default>
i2s_dout1	=
i2s_dout2	=
i2s_dout3	=
i2s_din	= port:PB12<2><1><default><default>

[spdif_para]
spdif_used	= 0
spdif_mclk	=
spdif_dout	= port:PB13<4><1><default><default>
spdif_din	=

[audio_para]
audio_used	= 1
audio_pa_ctrl	= port:PH15<1><default><default><0>

[ir_para]
ir_used	= 0
ir0_rx	= port:PB04<2><default><default><default>

[pmu_para]
pmu_used	= 1
pmu_twi_addr	= 52
pmu_twi_id	= 0
pmu_irq_id	= 0
pmu_battery_rdc	= 200
pmu_battery_cap	= 2600
pmu_init_chgcur	= 300
pmu_earlysuspend_chgcur	= 600
pmu_suspend_chgcur	= 1000
pmu_resume_chgcur	= 300
pmu_shutdown_chgcur	= 1000
pmu_init_chgvol	= 4200
pmu_init_chgend_rate	= 15
pmu_init_chg_enabled	= 1
pmu_init_adc_freq	= 100
pmu_init_adc_freqc	= 100
pmu_init_chg_pretime	= 50
pmu_init_chg_csttime	= 720
pmu_bat_para1	= 0
pmu_bat_para2	= 0
pmu_bat_para3	= 2
pmu_bat_para4	= 5
pmu_bat_para5	= 12
pmu_bat_para6	= 23
pmu_bat_para7	= 26
pmu_bat_para8	= 29
pmu_bat_para9	= 32
pmu_bat_para10	= 36
pmu_bat_para11	= 46
pmu_bat_para12	= 54
pmu_bat_para13	= 69
pmu_bat_para14	= 79
pmu_bat_para15	= 90
pmu_bat_para16	= 100
pmu_usbvol_limit	= 1
pmu_usbvol	= 4000
pmu_usbcur_limit	= 0
pmu_usbcur	= 900
pmu_pwroff_vol	= 3300
pmu_pwron_vol	= 2900
pmu_pekoff_time	= 6000
pmu_pekoff_en	= 1
pmu_peklong_time	= 1500
pmu_pekon_time	= 1000
pmu_pwrok_time	= 64
pmu_pwrnoe_time	= 2000
pmu_intotp_en	= 1
pmu_used2	= 0
pmu_adpdet	= port:PH02<0><default><default><default>
pmu_init_chgcur2	= 400
pmu_earlysuspend_chgcur2	= 600
pmu_suspend_chgcur2	= 1200
pmu_resume_chgcur2	= 400
pmu_shutdown_chgcur2	= 1200
pmu_suspendpwroff_vol	= 3500

[recovery_key]
key_min	= 34
key_max	= 40
 
Last edited:
B

bluet0ps

Senior Member
Mar 3, 2005
67
3
reading my system info from my default rom is really 1.2ghz. however i find it strange that i get much lower antutu score with that rom, around 2145. with your rom i get 2730 pts. thanks for that,1.0 or 1.x!
 
Last edited:
C

Christian Troy

Senior Member
Sep 25, 2008
535
407
Venice (IT)
bluet0ps said:
reading my system info from my default rom is really 1.2ghz. however i find it strange that i get much lower antutu score with that rom, around 2145. with your rom i get 2597 pts. thanks for that,1.0 or 1.x!
Click to expand...
Click to collapse

install cpu spy and see what frequency is actually in use and get surprised :good:

they've spoofed a thing to fool people, that's all they did
 
D

deanstead2k10

Member
Jun 13, 2010
45
3
ly-f1 touch buttons fix

was having trouble getting my touch buttons working on ly-f1 i've just flashed the lyf1_compatibility_1.2.0_cbw.zip in 3rd party section and all is now working spot on just letting people know it works seen lots of people with this problem, awesome work christian
 
  • Like
Reactions: auldthief and Christian Troy
5

^533saw5^

Senior Member
Jun 9, 2010
102
15
Im trying to install aokp_20120708.zip from CWM 5.5.0.4 on Momo9 device but I get:

-- Installing: /sdcard/aokp_20120708.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/aokp_20120708.zip
(bad)
Installation aborted.

Anyone got any ideas, I have tried a couple of other roms aswell and get the same message, please help
 
You must log in or register to reply here.

Similar threads

C
[rom] Unofficial CyanogenMod 10 for many AllWinner A10 tablets
Replies
615
Views
794K
D
doralice
C
[rom] Unofficial CyanogenMod 9 for many AllWinner A10 tablets
Replies
414
Views
439K
A
Ashish Shetty447
D
CWM 6.0.2.8 for Allwinner A10 & A13 Tablets - v2a
Replies
209
Views
504K
J
jinvaders
F
[OBSOLETE] unofficial CyanogenMod 9/ClockworkMod Recovery 5 for Allwinner A10 devices
Replies
775
Views
473K
S
Saife El
F
[DEV] unofficial CyanogenMod 7/ClockworkMod Recovery 5 for TCC8902/TCC8803 tablets
Replies
2K
Views
623K
Lgrootnoob
Lgrootnoob

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 24
    C
    Christian Troy
    Supported tablets

    * Mediacom 907c, Momo11 Bird, JXD S9000, Eken A90 (first revision) and clones need 907c_compatibility_1.2.x.zip.
    * Visture V3 and clones need visturev3_compatibility_1.2.x.zip compatibility zip.
    * Mediacom 910i, Teclast A10t and clones need 910i_compatibility_1.2.x.zip compatibility zip.
    * ICOO D90W and clones need d90w_compatibility_1.2.x.zip compatibility zip.
    * CEMA10N7 "unknown" device needs cema10n7_compatibility_1.2.x.zip compatibility zip.
    * Bmorn V99 needs v99_compatibility_1.2.x.zip compatibility zip
    * Mediacom 711i, Momo9 and clones need 711i_compatibility_1.2.x.zip compatibility zip
    * Protab2XXL needs protab2xxl_compatibility_1.2.x.zip compatibility zip
    * Sanei N83 needs n83_compatibility_1.2.x.zip compatibility zip (note: internal bt doesnt work and will never work)
    * Hyundai A7HD needs a7hd_compatibility_1.2.x.zip compatibility zip
    * MOMO9 needs momo9_compatibility_1.2.x.zip compatibility zip
    * Onda Vi40 V3 needs vi40_compatibility_1.2.x.zip compatibility zip
    * LY-F1 and clones need lyf1_compatibility_1.2.x.zip compatibility zip
    * Protab2XXLv2 needs protab2xxlv2_compatibility_1.2.x.zip compatibility zip
    * TNT Singularity and clones need singularity_compatibility_1.2.x.zip compatibility zip
    * Eken T01 needs t01_compatibility_1.2.x.zip compatibility zip
    * Eken T02 needs t02_compatibility_1.2.x.zip compatibility zip
    * Eken T05a V1 needs t05a-v1_compatibility_1.2.x.zip compatibility zip
    * Eken T05a V2 needs t05a-v2_compatibility_1.2.x.zip compatibility zip
    * Eken T05a V3 needs t05a-v3_compatibility_1.2.x.zip compatibility zip
    * Eken T05a (unknown version) needs t05a-unk_compatibility_1.2.x.zip compatibility zip
    * Eken T10 needs t10_compatibility_1.2.x.zip compatibility zip
    * Eken T10 with mxc622x g-sensor needs t10-2axis_compatibility_1.2.x.zip compatibility zip
    * Sanei N10 needs n10_compatibility_1.2.x.zip compatibility zip (note: internal bt doesnt work and will never work)
    * Onda Vi30 Deluxe V3 needs vi30-deluxe-v3_compatibility_1.2.x.zip
    * Onda Vi40 Ultimate needs vi40-ultimate_compatibility_1.2.x.zip
    * Onda Vi10 Elite needs vi10-elite_compatibility_1.2.x.zip
    * Ainol Novo7 Elf needs elf_compatibility_1.2.x.zip
    * Sanei N83 Deluxe needs n83-deluxe_compatibility_1.2.x.zip compatibility zip (note: internal bt doesnt work and will never work)

    Tablets supported with legacy support (see FAQS section for more infos)

    * Mediacom 917i and 927i need 917i-927i_legacy-compatibility_vX.zip comp zip
    * Gemei G2 needs g2_legacy-compatibility_vX.zip comp zip
    * Gemei G9 (those not working fine with "regular" 907c comp zip) needs g9_legacy-compatibility_vX.zip comp zip
    * Sanei N90 needs n90_legacy-compatibility_vX.zip comp zip
    * Ainol Novo7 Aurora v1 and v2 need aurora-v1-v2_legacy-compatibility_vX.zip
    * Ainol Novo7 Aurora v3 needs aurora-v3_legacy-compatibility_vX.zip
    * MK802 PC-on-a-stick needs mk802_legacy-compatibility_vX.zip

    You can check "testing" section of my AndroidFileHost space to find out few more tablets that require some testing to be approved

    You can get them on this website



    Features

    * Bluetooth USB dongle support (btusb and ath3k)
    * USB GPS support (cp210x and pl2303)
    * Xbox 360 gamepad support (xpad)
    * PS3 USB gamepad support (hid-sony)
    * Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
    * OpenVPN support (tun)
    * NTFS and ExFat support
    * Veno congestion control algorithm
    * USB audio support
    * DVB-T support (DiB0700, AF9015, IT913x, AF9035 and RT28XXU) available through "Update Me"
    * Ad-hoc available through "Update Me"



    Instructions

    * Upload zips to MicroSD or internal memory.
    * Boot into CWM keeping pressed VOL- (MENU) and POWER for 3 secs, than release POWER and after another sec release VOL- (or use Novo7 tools if it doesn't work for your device)
    * Select "wipe data/factory reset"
    * Select "install zip from sdcard" -> "choose zip from sdcard" (or "choose zip from internal sdcard" if your files are into internal memory) and flash, in this order, rom / gapps / compatibility zip
    * Now go back, and select "Reboot system now"
    * Enjoy AOKP

    Note: when you update to a newer build you don't need to do a full wipe, you just have to wipe cache and dalvik cache



    Changelog

    Code: 
    2012-07-08
* !!! WARNING !!! Compatibility zip 1.2 is required !!! WARNING !!!
* bump kernel version to 3.0.36
* updated AOKP sources to release "Milestone 6"

2012-06-23
* added: "special coordinate system" needed for some gsensors
* added: ethernet settings (because of SystemUI force close I had to remove the ethernet icon from the system bar but it should work anyway, feedbacks are welcome)
* added: lock rotation to landscape when HDMI cable is plugged in (can be disabled from settings)
* added: HDMI resolution selector
* added: devlistener, a small daemon to set write permissions for supported usb bluetooth dongles
* removed: u3gmonitor (tell me if your 3g dongle was working with previous version and now it doesn't)
* changed: build fingerprint to match SGS2

2012-06-22
* initial release: works everything is working in CM9, it's only missing "HDMI resolution", "Ethernet settings" and "Volume button in system bar" options that will be added in next builds

    You can see upstream changelog here



    Download link

    * Androidfilehost.com



    Gapps

    * 2012-04-29

    If you have a /system partition of 300+ MB you can flash "official" gapps from goo.im/gapps, you'll have a working Face UnLock as a bonus.



    FAQ

    * To manage volume from the sysbar you can install this app
    * Legacy compatibility zips include stock kernel with extra modules (like bluetooth, gamepads, ecc.). It's enabled for ad-hoc and wifi direct won't work. USB Audio and DVB-T kernel modules won't work either.
    * Sanei N10 users (and other with "internal sdcard" on /dev/block/nandj device) can use this version of cwm.



    Sources

    * Github repository



    Screenshot

    iQxaCl.png
    View
    2
    D
    deanstead2k10
    ly-f1 touch buttons fix

    was having trouble getting my touch buttons working on ly-f1 i've just flashed the lyf1_compatibility_1.2.0_cbw.zip in 3rd party section and all is now working spot on just letting people know it works seen lots of people with this problem, awesome work christian
    View
    2
    C
    Christian Troy
    let's do things in the old fashioned way (the one i like, not fancy gui that don't let you understand what you're doing)

    connect to the tablet through adb and type these commands

    Code: 
    adb push recovery.img /sdcard/
adb shell
su
cat /sdcard/recovery.img > /dev/block/nandg
sync; sync; sync
echo -n boot-recovery | busybox dd of=/dev/block/nandf count=1 conv=sync; sync

    the system will reboot to the new flashed recovery
    View
    1
    H
    homecanibal
    Great job christian.

    Ive used your rom since initial aokp, and its fast and smooth.

    Try add 3g drivers, cant connect my 3g dongle.

    Ive problems with momo9 1.2.0 compatible drivers...

    Great job!
    I know that you dont like miui rom, because its iphonish, but can create miui rom?

    Sent from my LG-P500 using Tapatalk 2
    View
    1
    G
    Goes1967
    angus1225 said:
    Hi, can i flash this rom to a Ainol Aurora directly in the original recovery, or it MUST be CWM recovery? thkxs
    Click to expand...
    Click to collapse

    You have to use a custom recovery CWM.
    View

New posts