true I know where you are coming from, since I was talking to boost cust care this was all just talk they just said there should not be any issue but could not be sure till the phone was out.
FLASH EPIC 4g TOUCH on boost!! Step by step!!
- Thread starter ebuechler3
- Start date
true I know where you are coming from, since I was talking to boost cust care this was all just talk they just said there should not be any issue but could not be sure till the phone was out.
yup, that is what they told me, but your statement make more sense, we will all know in a couple of months when the ET is out.
Man if I didn't read these steps and try to perform them about a million times, I didn't do it once. Still no 3g or internet at all even though I do get the 3g symbol to light up.
Now I have a samsung galaxy s II or E4GT SPH-D710 whatever you want to call it
I used the samsung rant as donor phone.
I have done the NV ITEMS write (except 1192 and 1194) on the E4GT.
I have written the profile 0 mymeid@blahblahblah.com ha and aaa 32 digit key written as well from NVITEMS466 (AFTER THE 10) SPI 4D2 SPI 4D2, enable rev tunneling, ip addresses all match with guide.
I have profile 1 name@blahblahblahblah.com ha key is filled in, NOW HERE IS WHERE I kind of get stuck (on the guide it tells me it should be a 6 digit AAA key and another guide tells me it should be 12 digit key but when I do the scan on QXDM it gives me a 14 digit key, I have tried inputting the first 6 digits the last 6 digits the first 12 digits and the last 12 digits of the "14 DIGIT KEY I GOT FROM QXDM SCAN for PROF 1"
the IP addresses all match and REV TUNNELING enabled.
is there any settings I need to mess with when I open up up the PPP TAB on UM or AN???
What am I doing wrong here? I feel like I'm REALLY CLOSE TO GETTING 3G WORKING just need 1 more small thing.
Update 3g 4g talk and text now working
Okay so here's an update to what I was doing wrong, as far as the question for getting 14 digits from the rant "BOOST AAA SECRET" the answer to that is. Use the last 12 digits of the 14 digits it gives you. Mine was 06747276626971, so I used 747276626971. (I had a problem with writing the wrong key down which was making me not get internet at all. Input IPs and all that good stuff rev tunneling enabled.
For those of you who are having problems with ACTIVE USER CHANGING TO 1 when you want it to go to 0 please don't take what I am giving you as a sure fix but this is what I did: When I opened up QPST CONFIGURATION and did SERVICE PROGRAMMING, HIT OK (just like every other time, but) before I hit "READ FROM PHONE" I went over to the "M.IP" tab and I changed ACTIVE USER to 0, then I hit read did my modifications to the PROFILES hit "WRITE TO PHONE" and the next time I checked my phone FULLY WORKING 3G YAY! 1000kbps in my APT.
Thanks to everyone on this one I swear I went to 100 different sites for help I sure hope someone can make good use of this.
*ON NOTE CREDIT GOES TO IFUXWITUZ... don't forget to change your settings to this
PPP Config
Um settings:
tethered nai: boostmobile.com
user ID: phonenumber@boostmobile.com
check the 1xEVDO->1x box
AN settings
User ID:YOURMEID@hcm.sprint.com (this is just an example you replace the YOURMEID number with your MEID(DEC) number
Okay so here's an update to what I was doing wrong, as far as the question for getting 14 digits from the rant "BOOST AAA SECRET" the answer to that is. Use the last 12 digits of the 14 digits it gives you. Mine was 06747276626971, so I used 747276626971. (I had a problem with writing the wrong key down which was making me not get internet at all. Input IPs and all that good stuff rev tunneling enabled.
For those of you who are having problems with ACTIVE USER CHANGING TO 1 when you want it to go to 0 please don't take what I am giving you as a sure fix but this is what I did: When I opened up QPST CONFIGURATION and did SERVICE PROGRAMMING, HIT OK (just like every other time, but) before I hit "READ FROM PHONE" I went over to the "M.IP" tab and I changed ACTIVE USER to 0, then I hit read did my modifications to the PROFILES hit "WRITE TO PHONE" and the next time I checked my phone FULLY WORKING 3G YAY! 1000kbps in my APT.
Thanks to everyone on this one I swear I went to 100 different sites for help I sure hope someone can make good use of this.
*ON NOTE CREDIT GOES TO IFUXWITUZ... don't forget to change your settings to this
PPP Config
Um settings:
tethered nai: boostmobile.com
user ID: phonenumber@boostmobile.com
check the 1xEVDO->1x box
AN settings
User ID:YOURMEID@hcm.sprint.com (this is just an example you replace the YOURMEID number with your MEID(DEC) number
I had my e4gt flashed for me by a company down here locally. I used an incognito as my donor. Good esn numbers on both. I just modded my 4g mac and wiped data and cache came back to my nandroid backup and now no 3g. I went to the company because I couldn't get the incognito to pop the 1192 address. I do have all the other files and info needed. I have phone but no data. Read thru this and other posts but a bit lost. Have working qpst qxdm and cdma.
So frustrated. I have both the sprint ha and aaa as well as the Sanyo incognito ha and aaa. Keep getting error 67 password username mismatch.
Help please
Update: after many many flashes 3g working but connection spotty at best.
Sent from my SPH-D710BST using Tapatalk 2
So frustrated. I have both the sprint ha and aaa as well as the Sanyo incognito ha and aaa. Keep getting error 67 password username mismatch.
Help please
Update: after many many flashes 3g working but connection spotty at best.
Sent from my SPH-D710BST using Tapatalk 2
Last edited:
Hello everyone,
I bought a Epic 4g flashed to Boost mobile around may 2011 and everything worked perfectly up until early july when i i started having problems with my texts messages being received late and some of my calls not coming in. Messages come in hours late sometimes and its mostly when im using my phones internet but when i am home using WIFI texts are perfect and everything comes in at the right time. if i can get any help i would really appreciate it
I bought a Epic 4g flashed to Boost mobile around may 2011 and everything worked perfectly up until early july when i i started having problems with my texts messages being received late and some of my calls not coming in. Messages come in hours late sometimes and its mostly when im using my phones internet but when i am home using WIFI texts are perfect and everything comes in at the right time. if i can get any help i would really appreciate it
Yeah should be fine. There is an ff20 build in the dev section, which is the software for the boost mobile e4gt. Might be worth looking at.
Sent from my SPH-D710 using xda app-developers app
I bought an extra ET4 with a bad ESN from eBay. I loaded the fg20 just to see how it looked and I was pretty amazed on how smooth it was to my tricked out el29.
Last edited:
Man if I didn't read these steps and try to perform them about a million times, I didn't do it once. Still no 3g or internet at all even though I do get the 3g symbol to light up.
Now I have a samsung galaxy s II or E4GT SPH-D710 whatever you want to call it
I used the samsung rant as donor phone.
I have done the NV ITEMS write (except 1192 and 1194) on the E4GT.
I have written the profile 0 mymeid@blahblahblah.com ha and aaa 32 digit key written as well from NVITEMS466 (AFTER THE 10) SPI 4D2 SPI 4D2, enable rev tunneling, ip addresses all match with guide.
I have profile 1 name@blahblahblahblah.com ha key is filled in, NOW HERE IS WHERE I kind of get stuck (on the guide it tells me it should be a 6 digit AAA key and another guide tells me it should be 12 digit key but when I do the scan on QXDM it gives me a 14 digit key, I have tried inputting the first 6 digits the last 6 digits the first 12 digits and the last 12 digits of the "14 DIGIT KEY I GOT FROM QXDM SCAN for PROF 1"
the IP addresses all match and REV TUNNELING enabled.
is there any settings I need to mess with when I open up up the PPP TAB on UM or AN???
What am I doing wrong here? I feel like I'm REALLY CLOSE TO GETTING 3G WORKING just need 1 more small thing.
If you are having 3g issues you probably didn't port over you HA and AAA secret codes. To double check this you can try to do a profile update. If it says incorrect password then you botched the keys somehow. Funny thing is that on the evo you can just rewrite the msl from the donor phone to the evo and during a profile update your keys can be fixed even though the person in the video says something about not being able to be done over the air on cdma 2.7. I haven't been able to do this on an e4gt but I've done it at least 30+ times on evos I've "repaired". I dont have any phones with bad keys to play around with to come up with a workaround. Just had one I was trying to fix for a friend. The best I came up with in such a short time was is forcing a hands free activation and it seems like you are assigned some generic keys that allow for 1x internet speeds. I know that sucks but it's a start. Be careful with forcing the activation though. If you have good keys I wouldn't use #786 because you will have to re-enter them since they are reset to what was on the phone from the manufacturer. Too many resets might get voice/sms blocked with an error 12 or error 16 forcing you to have to get a boost rep to reset the account. You won't be able to dial out until you do so...
Have u try to go into u Mobil network and check if ur 3g network is check ?
Sent from my SPH-D710BST using Tapatalk 2
Sent from my SPH-D710BST using Tapatalk 2
Try to change ur modem .. make a backup of ur rom then flash el29 modem. Do a prl update if it works then restor u rom..
Sent from my SPH-D710 using Tapatalk 2
Try to change ur modem .. make a backup of ur rom then flash el29 modem. Do a prl update if it works then restor u rom..
Ok but I'm on FG20 ICS so I'm going to have to downgrade in order to achieve EL29.
Nope, didn't update on either modem.
Sent from my SPH-D710BST using Tapatalk 2
Last edited:
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
29First of all, i got 2 et4gs kicked off of sprint for too much roaming. Prl 0001 plus 1channel, and 1 or 2 movies a day did it... I was well over 10 gigs roaming! But i wanted to get out of my contract, so "mission accomplished".. Sprint gave me till jan. 4th to find a new carrier. How nice of them...
Next, after doing some research via google, Boost seemed to be my best option.. I literally had to put bits and pieces from other people's tutorials to make this work for our ET4Gs... Should i put their work together, and make a tutorial for us? i would definately give thanks and credit... The only thing that doesnt work is 4g. Everything else works better, and $50 a month, $5 off every 6 months? Yeeeeees
my speeds are slow when im home but i use wifi. But everywhere else, from a block up the street, throughout the whole city of des moines iowa, my speeds are way faster... No explanation why... But here goes nothing
System requirements: windows 7 ultimate or any computer that will recognize, read, and install drivers for your donor phone: incognito, and et4g..
1) Download and install these:http://www.mediafire.com/?xtyjg9y8cplae ... Kies is good to install for our et4g drivers
1a) follow this to a "t" for step 1a TAKE UR TIME... http://www.youtube.com/watch?v=ZwjAcqU_SFY..... Thanks Deck. DO NOT GO TO PART 2 OF HIS VIDEO GUIDE YET!
2) THANKS TO LEVIQUSE from xda..Now lets retrieve your ha, aaa passwords: first, i ALWAYS open up QPST before i use QXDM, then " Open QXDM, Select Options, Communications and select your port number, and select ok. Select View, New, Common, Command Output. Now in the white command box located in the UPPER part of the program type the following STEP 1!!!!! donor phone/ incognito COMMANDS:
spc YOUR6DIGITSPC
<ENTER>
requestnvitemread ds_mip_ss_user_prof
<ENTER>
You will get a bunch of data, it will start with the DIAG TX Item section, ignore this part and go down until you see the DIAG RX(check step E for an example) item section, select and copy this part to the end of the output to a notepad text file and save it as “sprint” STEP 2:
Now again in the command input box type
requestnvitemread ds_mip_ss_user_prof 1
<ENTER>
Do the same for the new output but save the notepad file as “boost”
A.) Close everything, we almost done with the incognito, open QPST configuration go the Ports tab and add a new port, select your port number, if nothing shows up uncheck the “show serial….blah blah” box and it will show your port number, select it and add it, you will now see your COM port with your phone connected. If it’s disabled, enable the port.
B) Now start client “service programming”, select your active phone, Read from phone, input your spc, after its done, save to file, save in a safe place, preferably in your p0rn folder. Close everything and turn off your incognito and give one last kiss to it and put it away.
VERY IMPORTANT NOTE: DO NOT EVER TURN ON YOUR PHONE AGAIN" THNKS LEVIUQSE
C) Install the Samsung ET4G drivers IF THEY ARE NOT ALREADY INSTALLED. Connect your Epic touch and dial ##8778#, THEN SELECT CP (THATS VERY IMPORTANT).. let your computer install the drivers and open CDMA workshop again.
D) Connect to new created port in CDMA workshop (go back to step 3 if you need help with this). Go to the security tab and in the Password section delete all the Fs and send 01F2030F5F678FF9 it will give you the et4gs SPC.. next, go to the memory tab and the press "Write" under NV ITEMS, press ok, and start writing 465, 466, 1192, and 1194 items to your et4g... Close CDMA Workshop for now.
E) Now lets find your HA and AAA keys for both your profiles so open the sprint and boost notepad files, Sprint’s HA and Boost’s HA and AAA are a 12 digit key, Sprint’s AAA is 32 digit key, if you look in the output data you got you will see 2 sections each with [0-15] lines, your keys are the very last 2 digits of each line. You will see something like this
This is “my” sprint data output
DIAG RX item:
index = 0
mn_ha_shared_secret_length = 0x06
mn_ha_shared_secret[0] = 0x12
mn_ha_shared_secret[1] = 0x34
mn_ha_shared_secret[2] = 0x64
mn_ha_shared_secret[3] = 0x45
mn_ha_shared_secret[4] = 0x45
mn_ha_shared_secret[5] = 0x78
mn_ha_shared_secret[6] = 0x00
mn_ha_shared_secret[7] = 0x00
mn_ha_shared_secret[8] = 0x00
mn_ha_shared_secret[9] = 0x00
mn_ha_shared_secret[10] = 0x00
mn_ha_shared_secret[11] = 0x00
mn_ha_shared_secret[12] = 0x00
mn_ha_shared_secret[13] = 0x00
mn_ha_shared_secret[14] = 0x00
mn_ha_shared_secret[15] = 0x00
mn_aaa_shared_secret_length = 0x10
mn_aaa_shared_secret[0] = 0xE8
mn_aaa_shared_secret[1] = 0x13
mn_aaa_shared_secret[2] = 0xE3
mn_aaa_shared_secret[3] = 0x80
mn_aaa_shared_secret[4] = 0x13
mn_aaa_shared_secret[5] = 0x15
mn_aaa_shared_secret[6] = 0xES
mn_aaa_shared_secret[7] = 0x78
mn_aaa_shared_secret[8] = 0x8D
mn_aaa_shared_secret[9] = 0xD4
mn_aaa_shared_secret[10] = 0x78
mn_aaa_shared_secret[11] = 0x0B
mn_aaa_shared_secret[12] = 0x45
mn_aaa_shared_secret[13] = 0x18
mn_aaa_shared_secret[14] = 0x88
mn_aaa_shared_secret[15] = 0x78
In this case “my” sprint ha key is 123464454578 and “my” aaa is E813E3801315ES788DD4780B45188878
ok now look and find yours, write it down and do the same for boost’s ha and aaa secret key
3) Now, ... Remember to always open up qpst before you use qxdm [/B] You already have your ha, and aaa passwords so start from the2:30 point in PART 2 OF THIS VIDEO! FOLLOW IT EXACTLY per say http://www.youtube.com/watch?v=QvrT5Qsp1S4&feature=watch_response_rev
Finally, start service programming for your active\online (et4g) and your incognito/offline offline “SURF6025-ZRF6000-A” You have to scroll down the list to find it.
3A). In the offline window, open the incognito file saved earlier. It should be saved in the "porn" folder.
Next, for the online window, read from phone(your et4g), and send the SPC.
3B) With both windows open in QPST service programming start matching whats in the “M.IP” tab from the incognito file to the epic’s online one
(thanks to ifuxwituz_) and thanks LEVIUQSE
Click profile 0 and click edit. Enter all information that you saved earlier and put them in the required box’s
NAI: YOURMEID@hcm.sprintpcs.com
Home address: 0.0.0.0
Primary HA address: 68.28.15.12
Secondary HA address: 68.28.31.12
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok.
Now Profile 1 information below………
Enter your HA Shared password first, then enter your AAA Password into the text box, next Enter all information that you saved earlier and put them in the required box’s
NAI: YourName@myboostmobile.sprintpcs.com
Home address: 0.0.0.0
Primary HA address: 255.255.255.255
Secondary HA address: 68.28.89.76
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked now with both passwords hit ok
Make the active user “0” and Write to phone the Et4g will now reboot. When it comes back enjoy 3g. Now for mms dial ##3282#, and enter the SPC code. Tap on advanced and scroll down to you see the URL mms.sprintpcs.com. Change the URL to http://mm.myboostmobile.com. And dont forget to ##8778# and select AP!!!
Congrats you have now converted your Et4g to boost mobile. I want to thank everyone for the information I received and the various guides. Without you none of this wouldn’t have been possible.
Visit AndroidHaKz.com
thanks androidhakz as well... i got lots from his word ducument file but cant find his link on xda... its for evo to boost... i truly hope i didnt forget to thank anyone.. im just trying to make it so you dont have to go everywhere to do something like this..... HAPPY NEW YEAR!!!2According to the new FCC laws, this type of thing is not illegal. Modifying an esn is only illegal if the intent is to defraud. If you are still going to pay Boost mobile money for your service, than changing the esn is not defrauding Boost mobile. Do not confuse company policies with actual FCC laws...2
Did the same thing lol
---------- Post added at 02:19 AM ---------- Previous post was at 01:49 AM ----------
No, No No No!
The keys for Profile 0 and Profile 1 both come from the Donor phone or you will not get 3G!!!
Profile 0-
-HA Shared ....... "secret" in text
-AAA Shared...... your diag rx keys you get in QXDM from your donor by typing the command Requestnvitemread ds_mip_ss_user_prof
Profile 1-
-HA Shared ....... "secret" in text
-AAA Shared....... a 6 digit key you can find in your donor phone by dialing ##DATA# or the diag rx keys you find in QXDM with the command Requestnvitemread ds_mip_ss_user_prof1
Therefore your provisioning for profile 0 and profile 1 should look something like
Profile 0
HA Shared: "secret"
AAA Shared: whatever numbers you got in QXDM
NAI: YOURDONORMEID@hcm.sprintpcs.com
Home address: 0.0.0.0
Primary HA address: 68.28.15.12
Secondary HA address: 68.28.31.12
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked
Now Profile 1 information below………
HA Shared: "secret"
AAA Shared: whatever numbers came up in QXDM
NAI: YourName@myboostmobile.sprintpcs.com (or whatever it says on your donor)
Home address: 0.0.0.0
Primary HA address: 255.255.255.255
Secondary HA address: 68.28.89.76
SPI: 4D2
SPI: 4D2
Rev Tunnel Preferred: Checked
Im about to make a real good guide for this. You did a real good job though2If anyone needs help
If Anyone needs help, can PM me or shoot me an email Email is obviously better. I successfully did this to 2 phones so the process is really easy for me.
kenflyy14@gmail.com2The FIX to all your problems !!! CLICK THE THANKS BUTTON !!!
If you choose to follow these steps, then I recommend flashing the EL_29 first and Root the phone, before starting !!! See the links at the bottom !!!!
The speeds may be low either because of the cell towers you're connected are overloaded, or because your Profiles are not set-up properly (the HA and AAA passwords typed in HEX mode !!! Disregard the zero's at the end of these passwords !!!).
If I were you, at this point I would do these steps:
1) Using CDMA WORKSHOP (as posted in the tutorial) READ the NV Items and SAVE the addresses from the old phone located at 465, 466, 1192 and 1194. Make sure you send the SPC unlock code, or the 16 digit manufacturer's password before reading these memory blocks (do this while the old phone is in AIRPLANE MODE !!! - If you have both phones with active radios, you will trigger the Sprint's Error 16 safety)
2) OPEN each file listed above ( 465, 466, 1192 and 1194 ) and make sure you actually have the required info. You will see blocks of numbers, paired. If you see ACCESS DENIED written inside one of these files, then you did something wrong, or the old phone DID NOT let you access those memory blocks (or WILL NEVER let you, depending on the old phone you're using). Close these files before continuing. If all four files have the proper info, then proceed to the next step.
NOTE: Don't ask what is the proper info that such files should contain !!! The info contained is specific ONLY to your phone !! The way these files are structured is identical, but they contain different blocks of information !!! You will figure it out once you open these files, and then you'll understand what I mean.
NOTE: Disconnect the old phone and turn it off from now on.
3) New phone from now on... Type ##8778# and select CP ... Connect the phone to the computer ... Send the SPC or the manufacturer's password for the new phone BEFORE WRITING these files to the new phone.
4) Enter the passwords you have for HA and AAA in Profile 0 (Sprint Profile) and the second HA and AAA passwords in Profile 1 (Boost Profile). You need to make sure you're using HEX as the method of writing these passwords, DISREGARDING THE ZERO'S AT THE END !!!
5) Re-boot your phone. You may have triggered the Error 16, in which case, just make a call, wait for operator, and give them your password that used to log into your account at BoostMobile.com.
6) There are many ways to gain 1X speed indication, but the easiest one (at least for me) is to follow the steps below. You need to have a ROOTED phone. I am NOT sure if this will work on ICS ROM's, but it works wonders on 2.3.6 (ie EL29 kernel and modem). The AIO MOD is a compilation of 14 functions, all bundled into 1 package...
NOTE: you will have a problem after installing the AIO MOD and the screen might invert from time to time... to permanently fix this, all you need is to download a FREE app from the Market, called Spare Parts +. In this app, set the WINDOW ANIMATIONS and TRANSITION ANIMATION to FAST. That's it. You can un-install this app if you want because the changes will be permanent.
FOLLOW THE LINKS IN THE ORDER I POST THEM BELOW:
To install EL_29 with SuperUser access, follow this link:
http://xdaforums.com/showthread.php?t=1433101
To ROOT your phone (and gain access to Clockwork Mod custom recovery), you need to download, run and use OPTION C, then choose OPTION L for EL29 + CWM ROGUE from the following link:
http://xdaforums.com/showthread.php?t=1342728
To install AIO MOD for the 1X Data Speed indication, WIFI Tethering, etc, etc... you need to prepare your phone first :
http://xdaforums.com/showpost.php?p=22047373&postcount=72
To download the AIO MOD :
http://xdaforums.com/showthread.php?t=1390304
To download Spare Parts + just search it in Google Market. set the WINDOW ANIMATIONS and TRANSITION ANIMATION to FAST. That's it. You can un-install this application if you want. The changes will remain.
To fix your MMS problem, you need to READ THE LAST SENTENCE IN THE TUTORIAL !!! Type ##3282# ... Click EDIT ... Type your SPC Code ... Click OTHERS ... Click MMSC URL ... Change the Sprint server listed in there to the following : http://mm.myboostmobile.com
Your voice message notification will NOT work ... when you're completely done with all of the above, install the application attached to my thread ...
Please read all the steps posted above and follow them precisely, before asking for more help.
CLICK THE THANKS BUTTON !!!
