Originally Posted by tempguest

Still getting the same error. Any other suggestions?

Sent from my EVO using xda app-developers app

Do you have the new Market installed? If not, try to install it and try Hangouts again.

Sent from my HTC d3rpONE using Tapatalk 2

Where did my horizontal quick settings go? I was trying to get my clock and my battery back using the toggles in EQS, but somehow, the quick settings was remove when the status bar returned.

How do I restore it?
______________________________
HTC Evo 4G LTE

Screenshot of my previous post.

______________________________
HTC Evo 4G LTE

Originally Posted by aarsyl

Where did my horizontal quick settings go? I was trying to get my clock and my battery back using the toggles in EQS, but somehow, the quick settings was remove when the status bar returned.

How do I restore it?
______________________________
HTC Evo 4G LTE

Tap the date at the top of the notification pull down

Originally Posted by roids87

Tap the date at the top of the notification pull down

Seriously? I tried Everything, except reflashing.

Regardless, thank you.

______________________________
HTC Evo 4G LTE

Originally Posted by aarsyl

Seriously? I tried Everything, except reflashing.

Regardless, thank you.

______________________________
HTC Evo 4G LTE

Yep it's that easy

Sent from my HTCONE using Xparent Red Tapatalk 2

@ steal and duce

I recently dropped my phone onto a piece of metal and the frame near the camera button is slightly bent. Unfortunately, this means that the camera button is constantly depressed completely.

I think that the button being pressed down all the time is causing a near 100% wake lock on my system.

Per duce's instruction, I blanked out the two references to the camera button in keypad_8960.kl. this solved the problem of burst pictures being taken constantly and also of the phone randomly entering camera mode.... But now I have this wake lock.

I've started absolutely fresh to no avail.

Any insight from the developers?

Originally Posted by a senile fungus

@ steal and duce

I recently dropped my phone onto a piece of metal and the frame near the camera button is slightly bent. Unfortunately, this means that the camera button is constantly depressed completely.

I think that the button being pressed down all the time is causing a near 100% wake lock on my system.

Per duce's instruction, I blanked out the two references to the camera button in keypad_8960.kl. this solved the problem of burst pictures being taken constantly and also of the phone randomly entering camera mode.... But now I have this wake lock.

I've started absolutely fresh to no avail.

Any insight from the developers?

The simplest solution that I can think of is to use OMJ's MOD pack to set the camera button to do nothing. Not sure if it will work, and it might undo what you did. Hopefully this helps.

Originally Posted by a senile fungus

@ steal and duce

I recently dropped my phone onto a piece of metal and the frame near the camera button is slightly bent. Unfortunately, this means that the camera button is constantly depressed completely.

I think that the button being pressed down all the time is causing a near 100% wake lock on my system.

Per duce's instruction, I blanked out the two references to the camera button in keypad_8960.kl. this solved the problem of burst pictures being taken constantly and also of the phone randomly entering camera mode.... But now I have this wake lock.

I've started absolutely fresh to no avail.

Any insight from the developers?

Clearly there isn't an easy software solution for your damaged hardware. Your best bet is probably looking into getting a new device.

Originally Posted by aarsyl

The simplest solution that I can think of is to use OMJ's MOD pack to set the camera button to do nothing. Not sure if it will work, and it might undo what you did. Hopefully this helps.

That would either do what I already had him do, or set it back to stock, my guess is OMJs "nothing" is actually "camera".

Originally Posted by a senile fungus

@ steal and duce

I recently dropped my phone onto a piece of metal and the frame near the camera button is slightly bent. Unfortunately, this means that the camera button is constantly depressed completely.

I think that the button being pressed down all the time is causing a near 100% wake lock on my system.

Per duce's instruction, I blanked out the two references to the camera button in keypad_8960.kl. this solved the problem of burst pictures being taken constantly and also of the phone randomly entering camera mode.... But now I have this wake lock.

I've started absolutely fresh to no avail.

Any insight from the developers?

If your not scared, you can try to take apart the phone and bend the frame back to its original position. I'm pretty sure it comes off, but it takes some work to take the phone apart. Here's a video, the metal band around the phone comes off, which might be able to be reworked with a bit of hammering http://www.youtube.com/watch?v=3D4ui...e_gdata_player

Sent from my EVO using Tapatalk 2