simple google will give you answer,
yes you can. not much different between them
[N7105] Stock ROM for N7105, Guide for installation & Root. - DISCONTINUED
- Thread starter dr.ketan
- Start date
simple google will give you answer,
yes you can. not much different between them
latest firmware for HK version 7105
I am currently using the latest HK firmware ZHHDMD2 (just upgraded 3 days ago, the version built date is May 2013).
but i am using Telstra's 4G network in Sydney. i have found that most time, i have only 1, or 2 bar. just wondering if this has something to do with the firmware? i have speed test:
50 upload
36 download
in Westfield shopping Mall near Dee Why 2099, but at home ( near beach), i only get 14 upload, and 9 download speed.
i have checked the N7105T firmware which is back to Feb this year. just wondering if i need to load another modem?
has anyone tried to use some other countries's firmware with Telstra's 4G LTE?
the HK version firmware also use big memory for Chinese font. so i want to change to something else.
I am currently using the latest HK firmware ZHHDMD2 (just upgraded 3 days ago, the version built date is May 2013).
but i am using Telstra's 4G network in Sydney. i have found that most time, i have only 1, or 2 bar. just wondering if this has something to do with the firmware? i have speed test:
50 upload
36 download
in Westfield shopping Mall near Dee Why 2099, but at home ( near beach), i only get 14 upload, and 9 download speed.
i have checked the N7105T firmware which is back to Feb this year. just wondering if i need to load another modem?
has anyone tried to use some other countries's firmware with Telstra's 4G LTE?
the HK version firmware also use big memory for Chinese font. so i want to change to something else.
did anyone in hare face a problem cannot boot to stock recovery..also cannot flash stock rom thru odin..
- Apr 9, 2011
- 39,235
- 76,824
Not possible to inclucde every ROM on first page so here guide for newbies, how to find ROM from SamMobile
Here is guide how to find stock ROM from SamMobile
** Guide showing images are for demonstration and which showing model number may be varies from yours, you have to select your device model number i.e N7105
- Open This SamMobile firmware page.
- Type device Model number in search box
- This will find all latest ROM for that device, click on Kies symbol next you your desired ROM to get download link.
- To get ROM from specific country, select Firmware option on page
- Fill up required option. This will show all available ROM from selected country.
i already try..odin say fail..i dont know what to do know..blank..myb is lock bootloader..i thing?
Post your odin log here for more details.
sent from my GT-N7100. Press thanks if I helped..
I'm on a 4.3 ROM and want to go back to stock rooted. Can I do that using mobile Odin? Also, I could not find a stock ROM for att in the USA on that page linked in the first post. My laptop died recently so I have no other option right now other than mobile Odin if that will work.
I am on Vodafone Australia's contract. I now have an option to swap the Note 2 for a white one. Which i would like to do so. I am rooted and on DVDMB2 firmware now. I would like to go back to stock.
I looked at SamMobile for the Australian Vodafone Firmware and found out versions other than DVDMB2.
And would the process described in the OP before rooting would be the way to go back to stock?
Thank You!!
I looked at SamMobile for the Australian Vodafone Firmware and found out versions other than DVDMB2.
And would the process described in the OP before rooting would be the way to go back to stock?
Thank You!!
My note 2 just died on me. It got hard bricked. The display time out, and afterwhich i could not boot it up.
Hi Dr. Ketan,
Would just like to ask for your help as i want to upgrade to 4.1.2. my android version by the way is 4.1.1
baseband - E250SKSVMF1
KERNEL - 3.0.31 - 1280599
se.infra@S0210-16 # 1
SMP PREEMPT Sat Jun 29 16:31 KST 2013
BUILD NUMBER - JRO03C.N7105XXALIJ
I dont know which country i will download the 4.1.2 from samfirmware as Im from the Philippines. Im afraid I might download the wrong one and it will have no english version. Can you help me?
Would just like to ask for your help as i want to upgrade to 4.1.2. my android version by the way is 4.1.1
baseband - E250SKSVMF1
KERNEL - 3.0.31 - 1280599
se.infra@S0210-16 # 1
SMP PREEMPT Sat Jun 29 16:31 KST 2013
BUILD NUMBER - JRO03C.N7105XXALIJ
I dont know which country i will download the 4.1.2 from samfirmware as Im from the Philippines. Im afraid I might download the wrong one and it will have no english version. Can you help me?
Stock ROM N7105 & How to Root. -
Who are on 4.1.1 firmware, are requested to update their device to latest 4.1.2 (2013 released) as soon as possible, older ROMs have SDS (sudden death syndrome) bug and can brick device spontaneously. latest ROMs are believed to be patched for this bug with kernel and recovery.
Stock ROMs for N7105
4.1.2 Feb 13
N7105XXDMB2 N7105XEFDMB2 - France
N7105XXDMB2 N7105VNZDMA2 - New Zealand (Vodafone)
N7105XXDMB3 N7105OLBDMA1 - Singapore
N7105XXDMB3 N7105OLBDMA1 - Singapore
N7105XXDMB2 N7105H3GDMA2 - United Kingdom (H3G)
N7105XXDMB3 N7105OLBDMA1 - Singapore (StarHub)
N7105XXDMB3 N7105OLBDMA1 - Singapore (SingTel)
N7105XXDMB2 N7105SEBDMA2 - Baltic
N7105XXDMB2 N7105MOBDMA1 - Austria (A1)
N7105XXDMB2 N7105SFRDMA2 - France (SFR)
N7105XXDMB2 N7105PLSDMA1 - Poland (PLUS)
N7105XXDMB2 N7105NEEDMB1 - Nordic countries
N7105XXDMB2 N7105VODDMA2 - United Kingdom (Vodafone)
N7105XXDMB2 N7105TPHDMA1 - Portugal (TPH)
N7105XXDMB2 N7105HTSDMA1 - Sweden (Tre)
N7105XXDMB2 N7105HTDDMA1 - Denmark (3)
N7105XXDMB2 N7105TMHDLK8 - Hungary (T-mobile)
N7105XXDMB2 N7105FTMDMA1 - France (Orange)
N7105XXDMA8 N7105OLBDMA1 - Singapore
N7105XXDMA8 N7105OLBDMA1 - Singapore (SingTel)
N7105XXDMA8 N7105OLBDMA1 - Singapore (StarHub)
4.1.2 Jan 13
N7105XXDLL7 N7105BOGDMA1 - Download - France (Bouygues)
N7105XXDLL7 N7105HTSDLL2 - Download - Sweden (Tre)
4.1.2 Dec 12
N7105XXDLL7 N7105OLBDLL2 - Download - Singapore 2012 December
N7105XXDLL7 N7105OLBDLL2 - Download - Singapore (StarHub)
N7105XXDLL7 N7105OLBDLL2 - Download - Singapore (SingTel)
N7105XXDLL4 N7105HTDDLL2 - Download - Denmark (3)
N7105XXDLL4 N7105HTSDLL2 - Download - Sweden (Tre)
N7105XXDLL4 N7105TMHDLK8 - Download - Hungary (T-mobile)
N7105XXDLL4 N7105VFGDLL2 - Download - Germany (Vodafone)
N7105XXDLL4 N7105SFRDLL3 - Download - France (SFR)
N7105XXDLL4 N7105COSDLK3 - Download - Greece (Cosmote)
N7105XXDLL4 N7105PLSDLL3 - Download - Poland (PLUS)
N7105XXDLL4 N7105OMNDLL2 - Download - Italy (Vodafone)
N7105XXDLL1 N7105TLADLL1 - Download - Sweden
N7105XXDLL1 N7105TMHDLK8 - Download - Hungary (T-mobile)
4.1.2 Nov 12
N7105XXDLK7 N7105OJVDLK5 - Download - South Africa (Vodafone)
4.1.1 Nov 12
N7105XXALJ5 N7105OLBALJ1 - Download - Singapore
N7105XXALJ5 N7105VNZALJ3 - Download - New Zealand (Vodafone)
4.1.1 Oct 12
N7105XXALJ5 N7105OPSALJ3 - Download - Australia (Optus)
N7105XXALJ5 N7105SWCALJ5 - Download - Switzerland (Swisscom)
N7105XXALJ5 N7105HTSALJ5 - Download - Sweden (Tre)
N7105XXALJ5 N7105HTDALJ3 - Download - Denmark (3)
N7105ZHALJ4 N7105ZZHALJ4 - Download - Hong Kong
N7105XXALJ5 N7105OLBALJ1 - Download - Singapore (SingTel)
N7105XXALJ5 N7105OLBALJ1 - Download - Singapore (StarHub)
N7105XXALJ3 N7105COVALJ2 - Download - Sweden
N7105XXALJ3 N7105OLBALJ1 - Download - Singapore (SingTel)
N7105XXALJ3 N7105OLBALJ1 - Download - Singapore (StarHub)
N7105XXALJ3 N7105OLBALJ1 - Download - Singapore
N7105XXALJ3 N7105TLAALJ2 - Download - Sweden
N7105XXALIJ N7105OLBALIB - Download - Singapore (StarHub)
4.1.1 Sept12
N7105XXALIJ N7105DTMALI5 - Download - Germany (T-Mobile)
N7105XXALIJ N7105OLBALIB - Download - Singapore
N7105XXALIJ N7105OLBALIB - Download - Singapore (SingTel)
N7105XXALIJ N7105EVRALIC - Download - United Kingdom (EE)
N7105XXALIJ N7105OXAALII - Download - Portugal (Vodafone)
N7105XXALIJ N7105VFGALIE - Download - Germany (Vodafone)
N7105XXALIJ N7105TPHALIA - Download - Portugal (TPH)
N7105XXALIJ N7105TMNALIB - Download - Portugal (TMN)
N7105XXALIJ N7105OPTALIC - Download - Portugal (Optimus)
Installation Instruction [Mobile odin is now have support for NOTE2]
Make sure you have installed Kies OR Samsung USB driver
Open up the S/W Installation Program by executing the Odin3 v3.04.exe
1. Enable the check mark by click on the following options(default Option)
- Auto Reboot, and F. Reset Time
- Download ROM and extract (unzip tool)
- Check PDA, and point to ROM file you have extracted
2. Now switch off device and Enter into Download Mode
- Enter into Download Mode by pressing Volume Down button, Home Key and
Power Button simultaneously. And then, press Volume UP button in Warning Page to enter the Download Mode.
3. Connect the device to PC via Data Cable.
Make sure that the one of communication port [ID:COM] box is highlighted in
light blue. The device is now connected with the PC and ready to download the
binary file into the device.
4. Start downloading binary file into the device by clicking Start Button on the screen.
the green colored "PASS!" sign will appear on the upper-left box if the binary file
has been successfully downloaded into the device.
Vol Down Power Key
Home Key
5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name
by pressing the following code in sequence;
*#1234#
You can perform full reset by pressing the following code in sequence;
*2767*3855#
Flashing firmware with Mobile odin to keep root intact and flash counter untouched - Here
Flashing with heimdall - Here -(thanks to as i9000)
First thing I do recommend just after flashing ROM
-Register to samsung A/C and enable Remote control
Here is detail guide.
You have a Korean Note 2 (e250s) so you should upgrade your phone with a firmware from this link.
http://www.sammobile.com/firmwares/1/?model=SHV-E250S&pcode=SKT#firmware
You have to use Odin in order to install the firmware.
Hope it helps.
thank you for the info. should i download the firmware that is from the philippines where i reside?
There is not a Philippines specific firmware. At least not for e250s. If you want to stay on stock ROM you should use the one from South Korea.
Did you buy your phone from Philippines? From a specific carrier?
guys I need ur help. I did method 2 and after odin said 'PASS' my phone keeps going to stock recovery. I also untick the auto boot but still it goes to stock recovery. In download mode everything is change to custom already. so how do I fix this problem?
Which recovery u wanted to use, CWM? If yes, just install ROM Manager from playstore and flash it from there on - from ROM manager itself. U have to update to latest in order to see latest recovery. Make sure you choose the correct model of your phone to download correct recovery image. I just did it last night, btw, as I had to unroot and root my phone.
sent from my GT-N7105 on SlimRom Build 2.2 Official
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
40Stock ROM N7105 & How to Root. -
Who are on 4.1.1 firmware, are requested to update their device to latest 4.1.2 (2013 released) as soon as possible, older ROMs have SDS (sudden death syndrome) bug and can brick device spontaneously. latest ROMs are believed to be patched for this bug with kernel and recovery.
Here is guide how to find stock ROM from SamMobile
** Guide showing images are for demonstration and which showing model number may be varies from yours, you have to select your device model number i.e N7105
- Open This SamMobile firmware page.
- Type device Model number in search box
- This will find all latest ROM for that device, click on Kies symbol next you your desired ROM to get download link.
- To get ROM from specific country, select Firmware option on page
- Fill up required option. This will show all available ROM from selected country.
Stock ROMs for N7105
4.1.2 Feb 13
LINKS REMOVED
Installation Instruction [Mobile odin is now have support for NOTE2]
Make sure you have installed Kies OR Samsung USB driver
Open up the S/W Installation Program by executing the Odin3 v3.04.exe
1. Enable the check mark by click on the following options(default Option)
- Auto Reboot, and F. Reset Time
- Download ROM and extract (unzip tool)
- Check PDA, and point to ROM file you have extracted
2. Now switch off device and Enter into Download Mode
- Enter into Download Mode by pressing Volume Down button, Home Key and
Power Button simultaneously. And then, press Volume UP button in Warning Page to enter the Download Mode.
3. Connect the device to PC via Data Cable.
Make sure that the one of communication port [ID:COM] box is highlighted in
light blue. The device is now connected with the PC and ready to download the
binary file into the device.
4. Start downloading binary file into the device by clicking Start Button on the screen.
the green colored "PASS!" sign will appear on the upper-left box if the binary file
has been successfully downloaded into the device.
Vol Down Power Key
Home Key
5. Disconnect the device from the Data cable.
6. Once the device boots up, you can check the version of the binary file or name
by pressing the following code in sequence;
*#1234#
You can perform full reset by pressing the following code in sequence;
*2767*3855#
Flashing firmware with Mobile odin to keep root intact and flash counter untouched - Here
Flashing with heimdall - Here -(thanks to as i9000)
First thing I do recommend just after flashing ROM
-Register to samsung A/C and enable Remote control
Here is detail guide.16How to Root N7105
Map for this post
How to root N7100
Advantages and disadvantages of each method of root.
Method 1:Root with stock Recovery
Method 2: Root with CWM recovery
Method 3 : Root with simple APK
EFS Backup
Unroot N7100
-----------------------------------------------------------------------------
How to Root N7105
Big Thanx to Chainfire and Chenglu for great work.
You can get root access by A.Rooting your existing and desired ROM or B.Flashing prerooted ROM.
Select your choice from one of this
1. Root with Stock Recovery - It will give full root access but have stock recovery. You can set your flash counter '0' and so ready to claim warranty.If you want device full stock + root this is choice for you.
2. Root + Advanced CWM - This will give Root access as well advanced CWM - Here you can reset counter, but once reboot to recovery, it will raise flash counter, Find option to reset counter on every boot (only play store version).
3.Root with ExynosAbuse apk - simply install apk to gain root access.
1.Root with Stock Recovery - CF auto Root from Chainfire - can keep counter '0'
Big Big Thanks to Chainfire for giving this, Here is source thread
Download this CF Auto Root package
and extract it to .tar
Procedure :
Make sure you have installed Kies OR Samsung USB driver
1.Open Odin and select PDA tab
2.Point to extracted file CF-Auto-Root-SGN2.tar (see image below)
3.Now switch off device and reboot in download mode
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
7.Reboot device and you will have superSU in application drawer.
Now you can use Triangle away and reset counter '0', Read Next post (post#3)
Again All credits goes to Chainfire, your support to Chainfire
2. Root with Advanced CWM - By Phil3759
Big Thanx and credit goes to Chenglu & Phil3759
Download :
1.
Download Phills touch enhanced recovery - This recovery using SDS patched kernel code
[ Here you can find detail fuction of recovery as well support related to recovery] again big thanx and credit goes to Phil3759
2. download SuperSu and busybox and copy zip file to Sd card of device
Procedure :
Step 1
Make sure you have installed Kies OR Samsung USB driver
1.Open Odin and select PDA tab (see image below)
2.Point to recovery file you have downloaded philz_touch_* -n7105.tar.md5
3.Now switch off device and reboot in download mode
press Vol down + Home +Power, And then, press Volume UP button in Warning Page to enter the Download Mode
4.Connect device to PC and wait till device successfully added to com port (it will turn light blue) (see image below)
5.Hit ‘Start’ to flash
6.Once it flashed successfully, you can see 'PASS' in table above the ID :COM, you can disconnect device from PC
Step 2 :
Now reboot to recovery and flash superSu and busy box file from recovery, which you have copied to Sd card
3.Root with apk No counter reset needs, Easiest - Credit goes to Chainfire, alephzain
1.Download latest from chainfire's original thread
2.Install application as routine apk installation and open it.
3.Open Exynos Abuse application from App drawer
4.Select Root device (see image)
5.It will ask SuperSU permission, Grant it See image)
6.Now your device is rooted, for security purpose you can disable Exploit.(see image)
Note : This may break camera, but unchecking disable exploit make it working again
7.Open SuperSU from app drawer and update binary (see image)
How to Unroot and make status Normal
Open Exynos Abuse app, uncheck disable explot and select Unroot device (see image)
Restart device and wait for 10 min. and then you can check status.
Reseting Counter
Above method will raise flash counter and you will need to reset counter to reclaim warranty, Read next post for it (post#3)
First thing I do recommend after rooting device
EFS Backup
Why so?
EFS folder contains some important and some basic info related to our device identity like Wi-Fi address, Bluetooth MAC address and the very main IMEI address (nv_data.bin).
Now if this EFS partition accidently corrupted then your phone’s IMEI no. will erased and you can not make voice call further. This kind of damage is often not accepted by the service center of your respected handset’s company.
Here your backup can only be savior for you.
How to Unroot :
- This is commonly needed before sending it to service station and reclaim warranty.
1.As discussed in post #3 if you have any custom recovery/Kernel first you need to replace it with stock one. If you have custom ROM, then you will have to flash stock ROM.(you can use mobie odin to keep root intact to reset counter)
2.You need to use Triangle away if your binnary count is non zero (read post #3)
3.Once your flash counter is 'No' then you can simply unroot from superSU setting
if your device status is -Modified, you can do this trick to reset to normal
setting - appl manager - All - clear data for SysScope as well Enterprise SysScope
This should change system setting to Normal
If still you have modified status, you can wipe cache and data from recovery.
If still it doesn't change status, try removing Ext SD card
4. This is optional but full proof method to unroot and won't leave any footprint of previous root.(provided you flash counter is 'No')
-Flash Stock ROM with PC Odin
-Wipe cache and data.
All credits goes to
Chainfire and Chenglu
Apart from described above, you can get root access without raising counter by flashing pre rooted ROM, for further detail read this7Reset Flash Counter
There is great tool from elite developer Chainfire known as Triangle Away
Source and full thread by Chainfire
Get Triangle Away to support CF
Steps to reset counter
-Download Triangle away and install
-Open Triangle away from appl drawer, grant SU permission
-Depends on your recovery/kernel, it may ask to download add on about 7.4MB file, dwnload it.
-After downloading select reset counter from application menu
-This will reboot device in special recovery, and you will see some colored text menu with big yellow, with round circle exclamation mark.
-Read available option, confirm your flash counter showing on this page and select appropriate menu(vol up) to reset counter.
-Your device will reboot and you will have counter '0'
In case if you are using CWM it may raise again on reboot, read below.
NoteII having new bootloader with auto checksum of recovery, so If you are using custom recovery flash counter may raise again on rebooting to recovery
So if you are using stock recovery, reseting count to '0' with triangle away is enough. In case you are using custom recovery, even after reseting counter again it will raise to 1 if you reboot device to recovery. For this you have to use option 'Reset at every boot' in triangle away. This option is available on Play version, and only you can see if you have custpm recovery and your kernel support it. (Redpill kernel reprted to support this feature of TA)
Common question about reseting counter
I have reset counter but system status still 'custom'
You should have stock recovery (Method A in post#2)
If you already have stock recovery(CF Auto root) then reset counter first
then wipe cache + wipe data(factory reset) + re wipe cache
You should now have system status 'official'
I have rest counter but after reboot again it goes to 1
This happen if you have rooted with chenglu's recovery(method 2 in post#2)
This is neither error of recovery nor triangle away. This happens due to new bootloader which have auto checksum for recovery, when you reboot to custom recovery count will raise.
To prevent this you need to have play version of Triangle away, and you should check (enable) 'Auto reset at boot'. Again this feature depends on kernel/recovery is supported or not, Redpill kernel reported to support this.6A.Tools
1.Odin 3.07 - Requires to flash ROM/Kernel/Modem.Using this to flash custom stuff will raise flash counter.
2.Samsung USB Driver 1.5.6 - Requires to connect your device to PC
3.Unzip Tool - Unzip tools to extract files
4.Pit file : Not for normal flashing, and shud be use under expert advise only.
5.Opera Portable Browser (supports resume download)
6.Check fus downloader - To download ROM which is currently available on Kies
7.Stock Kernels -
8.bootloader
9.N7100 Service manual + Quick start guide + User Guide of Galaxy Note2.
10.Screen lock password recovery - If you forget your pasword of screen, this can be saver for you, pro version also available. read on play store for detail
11.EFS backup tool - Very very important tool, If your device is rooted, first thing you need to do is EFS backup.
12.Call Recording - Read Xposed framework
13.Samsung Kies
14.Network unlock
15.Busybox
16.Triangle Away - Utility to reset counter and remove exclamation mark.
17.Transfer Data - Wireless transferring contacts/SMS (via Bluetooth) from your old device to Note.
18.SMS Backup & Restore- Simple SMS backup utility, useful before wiping data.
19.Undelete Files This application useful to recover data, if you have accidently deleted file from SD card/USB storage. This required Root.
20.ROM Cleaner - Remove bloatware,backup application and more
21.Directory bind - Useful to move data to Ext SD card, this helps in making free space on internal memory, as well it help to keep data on factory reset (Note 2 erases data on internal memory while factory reset.) If you bind such folder to Ext SD card then you won't need to backup those data.
22. Exfat support for XP - This is small window tool for XP machine, you can get support for exfat on XP. install 32/64 bit according your OS.
23.Quiet balance : if you are pissed off from carrier popup msgs after each call and data connection, here you can block it.
24..EFS repair Though EFS backup is best to have, but unfortunately you don't have, then worth to try with this.
25.Language enabler : This application will allow you to enable all those hidden languages which may be blocked by carriers
26. APN database - when you are unable to connect to network and missing correct APN setting, this may helpful to you.4Flash firmware using Mobile odin to keep root intact & counter untouched.
Flash firmware using Mobile odin to keep root intact & counter untouched.
If you have device already rooted, you can use Mobile Odin to flash stock firmware to keep Root intact, as well flash counter will also remain untouched.
Here is example to flash leaked firmware LJ2 4.1.2 (Images shown is from N7100 and demo purpose only, you will have to select 7105 ROM)
1.Download & extract ROM file and Copy to SD card.
2.Install Mobile Odin Pro
When you first time open Mobile Odin, it will ask to download required flasher file.
3.Open Mobile odin - select open file
4.Point to ROM file you have copied
5.It will fill up all available field automatically
6.select Ever root option and check mark 'Inject SuperSU' And Then Flash.
Device will reboot in special recovery and firmware will be flashed
After finishing flashing device will be reboot normally and you will have SuperSU installed and flash counter will remain untouched too.
