[DEV] ICS port for I9000/I9000B - BETA (ICS sources) - work in progress

Status
Not open for further replies.
Search This thread

TFordham

Senior Member
Jan 15, 2011
1,025
247
Saratoga Springs USA
Amazing! While laughing my ass of, I followed the tutorial and worked flawlessly.....with one exception:

All call related. Can make a call, but I can't hear them and can't seem to receive incoming calls. Plus, when I make a call, I can't hear the ringing.

I swear I've read every post three times, and haven't seen anything on this. If I'm wrong, I apologize now, otherwise, can anyone guide me?

Sent from my GT-I9000 using XDA App
 

mr.klee

Senior Member
Nov 12, 2010
198
67
I swear I've read every post three times, and haven't seen anything on this. If I'm wrong, I apologize now, otherwise, can anyone guide me?

i don't believe you ;-) the solution can be found within this thread..

All call related. Can make a call, but I can't hear them and can't seem to receive incoming calls. Plus, when I make a call, I can't hear the ringing.

but since you were asking nicely, i'll give you a hint: headphones. it's a common problem with the vibrant.
 

prembox

Senior Member
Oct 12, 2010
930
327
Hyd
Incoming Calls Fix???

Followed the installation instruction step by step and installed Alpha6 and the new Fugu ....got ext card to work....calendar to sync ... 2G data connection to work after a few attempts with WarDrake's patch...was sitting comfy for an hour or so .....and hour or so later my Boss comes running to me that he wasn't able to connect to me at all.... he hears half a ring and gets the message that I'm not reachable!!! what hell i thought.... I reproduced the problem and was shocked that no one was able to connect to me but I was able to dial out though...... re-flashed 3 different modems but nothing worked. Moved back to my MIUI as my calls are important to me.

I checked the Phone Status and it was showing the signal strength as 0 dBM 97 asu on all the 3 modems I tried and Data Connection shown as Edge 2 and internet works for all apps except incoming cals :confused:. Never saw the 2 before till date...rebooted many times and SIM taken out..put in...nothing worked.

Anyone else experienced this??? Anyone has a fix in mind??? :confused::confused:
 
Last edited:

saszseb

Senior Member
Jan 30, 2011
4,613
1,018
Hungary, Gy-M-S.
Amazing! While laughing my ass of, I followed the tutorial and worked flawlessly.....with one exception:

All call related. Can make a call, but I can't hear them and can't seem to receive incoming calls. Plus, when I make a call, I can't hear the ringing.

I swear I've read every post three times, and haven't seen anything on this. If I'm wrong, I apologize now, otherwise, can anyone guide me?

Sent from my GT-I9000 using XDA App
Settings>Sound>Volumes: slide Ringtone & notifications.
+set Vibrate.
 

prana_Sky

Senior Member
Aug 21, 2010
579
104
Melbourne
In apn settings
Apn type. default,supl

Sent from my GT-I9000 using XDA App

OHH YEAH! THAT WAS IT YOUR A FARKIN LEGAND Thank you thats all it was holy molly. it didn't give me that line when I looked up Optus APN.
Thanks again xchasa for the info. :D


By the way thanks to all the support in this thread alot of people very helpful. cheers
 

fackamato

Senior Member
Aug 10, 2010
419
45
Followed the installation instruction step by step and installed Alpha6 and the new Fugu ....got ext card to work....calendar to sync ... 2G data connection to work after a few attempts with WarDrake's patch...was sitting comfy for an hour or so .....and hour or so later my Boss comes running to me that he wasn't able to connect to me at all.... he hears half a ring and gets the message that I'm not reachable!!! what hell i thought.... I reproduced the problem and was shocked that no one was able to connect to me but I was able to dial out though...... re-flashed 3 different modems but nothing worked. Moved back to my MIUI as my calls are important to me.

I checked the Phone Status and it was showing the signal strength as -97dBM on all the 3 modems I tried and Data Connection shown as Edge 2. Never saw the 2 before till date...rebooted many times and SIM taken out..put in...nothing worked.



Anyone else experienced this??? Anyone has a fix in mind??? :confused::confused:


Eh. Are you SERIOUSLY using an alpha ROM on your phone that your boss needs to reach you on? You're lucky to have a job.
 

maxniper

Senior Member
Jan 24, 2006
2,217
407
53
Montijo
I'm using Alpha on my JOB phone and i don't complain hehe, if my boss can't call me it moves is ass from the seat and come to my desk lol
 
  • Like
Reactions: Fancois

drew071

Senior Member
Jul 27, 2010
1,857
695
hey

Hey everyone. Ive been watching this thread for a while now i thought its now time to say sometying. I just wanted to say thanks to onecosmic and the other devs for this release. I know its still in alpha but i now use this as my daily ROM. Things can only get better and better as they are with each release. Thanks

For those who cant get things working, read through all the posts, alot of the answers are here already. I flashed from start to finish and have 3g working etc just by following what people have already said. Just take a little time and patience to read before asking questions.

Thanks again.

Drew071
 

PsychoTribe

Senior Member
Jun 20, 2008
109
29
Hm in About phone/Status i'm getting Signal strenght - 0 dBm 97 asu and the signal bars in notification is always full :) No problems with the calls tho.
Is it possible to be related to modem? My baseband shown as I9000BVJJV3. Also wi-fi icon in notification dont show signal strenght, only indicating a transfer.
Is it normal for the state of the Alpha6?

Edit: Sorry i just now saw that there is an reported issue on code.google.com for the port that says exact the same.
 
Last edited:

xchasa

Senior Member
Dec 29, 2010
1,260
367
Hm in About phone/Status i'm getting Signal strenght - 0 dBm 97 asu and the signal bars in notification is always full :) No problems with the calls tho.
Is it possible to be related to modem? My baseband shown as I9000BVJJV3. Also wi-fi icon in notification dont show signal strenght only indicating a transfer.
Is it normal for the state of the Alpha6?

Wifi icon stays grey. Transfer arrows in icon show when operating.
Same modem as me and not one missed or dropped call.

Sent from my GT-I9000 using XDA App
 
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 715
    Links and rom updated:

    ICS Sources build Image (Not SDK anymore, version 4.0.1_r1)

    BIG, HUGE, MASSIVE, THANKS TO PAWITP FROM CM TEAM!!! (specially camera.aries.so, great job!)

    FUGU kernel, linux 3.0, integrated voodoo sound and color :) (big thanks to renaudallard)

    Here is the most recent image BETA 2:

    Changelog on the second post.


    We moved to google code:

    http://code.google.com/p/ice-cream-sandwich-sgs/downloads/list

    (ATENTION: image comes with a kernel for i9000b, if you have a i9000 international or vibrant, download the correct kernel)

    Thanks to ytt3r for the vibrant kernel :)

    Agreat tutorial made by ybinnenweg for installation and common issues (Thanks!):

    http://xdaforums.com/showthread.php?p=19563068#post19563068

    How to root the rom:

    http://xdaforums.com/showpost.php?p=19175375&postcount=628


    Github's:

    http://github.com/onecosmic

    http://github.com/syndtr

    http://github.com/koaaN

    http://github.com/pawitp

    http://github.com/teamhacksung

    http://github.com/cyanogenmod


    IRC channel:

    http://webchat.freenode.net/
    ##icssgs <- yes, double ## (we switched channel)

    What works:
    Both cellphones:
    Hardware Acceleration
    Audio
    calls, sms, 3g - no more script needed.
    Touch
    Wifi
    SDCards (internal and external)
    Market
    Contacts sync
    Calendar sync
    camera
    panorama mode
    face unlock
    Gps
    data usage
    Partition schemma is now including datadata back to avoid issues with slow movinand devices
    usb support
    bluetooth

    What does not work:
    Camera (video recording)
    Phone encryption


    I'll be posting updates as soon as i have them.

    CREDITS:

    Pawitp: ril fixes, hw acc , camera lib hack(big android guy :) ).
    teamhacksung
    Cyanogenmod team
    Syntr: kernel patches
    Galnet : First Release
    kooaN: i9000 kernel update
    Thearc77 : google apps
    WarDrake: mirroring
    ytt3r: kernel patching, vibrant and captivate kernels
    SGS CM team: ICS patches
    Motafoca 3g switch apk


    And all the other people that is helping to make this a reality :)


    Cheers
    142
    Changelog:

    Beta 2:

    Adb now works at boot (previously it only worked after the phone full boot was complete)
    PIN lock fixed (it should work, i cannot test it since i dont have pinlocked sim)
    adb reboot recovery now reboot the phone to the recovery instead of performing a normal reboot
    Recovery now allows you to make nandroid backups
    Fixed Market download problem
    Minor fixes (code cleanup)
    133
    Tutorial How to flash Alpha 7! NOOBPROOF

    OK, for all you people who are too lazy to read the damn thread or simply don't understand it(no offense) I will write this very noob-proof guide to install alpha 6. This guide is for the I9000 SGS; I’d love to write it for the I9000B, but as I don’t have this device I can’t ensure you everything will work.
    Warning, alpha builds are not fully working!! They may contain bugs & have random reboots, by using this guide you accept this. Also I’m not responsible for hard-bricking your phone, which acually shouldn’t happen if you just follow this guide very exactly.

    So we start off, ofcourse we need some files & requirements:
    - A phone with a custom kernel installed!! This is very important as we need to enter CWM(ClockWorkMod(recovery))!
    - The rom itself ( http://ice-cream-sandwich-sgs.googlecode.com/files/ICS_4.0.1_r1-alpha7.zip )
    - The kernel (http://ice-cream-sandwich-sgs.googlecode.com/files/CM7FuguMod_20111124_update-i9000.zip )
    - SuperUser fix (http://ice-cream-sandwich-sgs.googlecode.com/files/Superuser-3.0.6-efgh-signed.zip )
    - 3G fix ( http://xdaforums.com/attachment.php?attachmentid=793818&d=1322157965 )
    - The ability to read english & set your brain to read & do mode.

    OK, now you’ve downloaded all those files and set your brain to read & do let’s start off.
    First of all we need to disable your simlock, as ICS will not enable your network with a simlock. If you don’t feel like disabling your simlock, there is no point for you flashing ICS.
    To do this we’ll do the following:
    1. Go to settings
    2. Go to the security tab
    3. Click on sim card lock, and disable it.

    After you’ve done this you have to make sure your on a JVT rom. Also disable the lagfix.(I’m not going to explain this. Why? Well if you have flashed any custom rom you know how to do this.)

    Now hook up your phone to your PC in USB mode, and in the root of your internal storage make a folder called “Flashable zips”. Now copy ALL those zip files you’ve just downloaded to this folder, ALL of them.

    After your done we will reboot in recovery, for the beginners a small tutorial.
    1. Turn off your phone by holding down the power button and clicking “power off phone”.
    2. Wait for your phone to TOTALLY turn off, when it is it’ll vibrate for a moment.
    3. Now hold the “Volume UP” + “Home” + “Power” buttons until you see the Galaxy S I9000 logo appear, when the logo appears release the buttons and wait a bit. Now you will be in recovery!

    Now we are going to backup your phone, incase you want to return to your old setup. (I will not provide a guide how to return, but as long as you have the backup almost any dev can help you with putting it all back together) Now here follow these exact instructions to backup your current setup.
    1. Use the volume buttons to navigate to “backup and restore”
    2. Press either the power button or home button to select the option. (the text may disappear depending on your kernel, just re-press the button you pressed to make it disappear and the text will be there again)
    3. Now press “Backup” and it will start backing up your phone, this may take a while.. get a coffee.
    Check if the backup was succesfull, the recovery will report this in white/orange tekst.

    You’ve succesfully made a nandroid!

    Now we need to wipe our phone.
    1. In the recovery menu select “wipe data/factory reset”
    2. Now select “wipe cache partition”
    3. Go ahead and go to the “advanced” option
    4. In there select “wipe Dalvik Cache”
    5. Go back to the menu you were before.

    OK, now it’s time to start the actual flashing, again follow these instructions to the letter!
    1. In the recovery menu navigate to “install zip from sdcard” and press your selection key
    2. Now choose the option “choose zip from sdcard”
    3. Navigate to the folder we just made “Flashable zips”
    4. In there select “ICS_4.0.1_r1-alpha7.zip”
    5. Now navigate to the option “Yes – install ICS_4.0.1_r1-alpha7.zip”
    It will now flash the rom.
    Does your phone reboot into a blue recovery menu? Just follow the steps again as discribed above ^.

    Once we have done this, we will have to flash the kernel.
    1. In the recovery menu navigate to “install zip from sdcard” and press your selection key
    2. Now choose the option “choose zip from sdcard”
    3. Navigate to the folder we just made “Flashable zips”
    4. In there select “CM7FuguMod_20111124_update-i9000.zip”
    5. Now navigate to the option “Yes – install CM7FuguMod_20111124_update-i9000.zip”

    Once it’s done, go ahead and hit the “reboot system now” option.
    Now wait for the phone to boot. Take a coffee in the meantime, this can take a while.

    Now an important thing!!
    Android will comeup with 2 options, first check the box "set as default" then press the FIRST ONE!

    When it’s up and running, we need to install script manager. Open up the market and setup your gmail account. Once you’ve done this search in the market for “script manager”, and download & install Script Manager FREE.

    We need to flash a 3G fix by WarDrake. It seems the bootanimation is too big and it causes 3G to not work for most of us. Thus the bootanimation needs to be removed. Follow these instructions to flash this package.
    1. In the recovery menu navigate to “install zip from sdcard” and press your selection key
    2. Now choose the option “choose zip from sdcard”
    3. Navigate to the folder we just made “Flashable zips”
    4. In there select “enable3gv3.zip”
    5. Now navigate to the option “Yes – enable3gv3.zip”
    Thanks WarDrake for finding this out!!

    Once you've flashed the 3G fix go ahead and flash the superuser fix.
    1. In the recovery menu navigate to “install zip from sdcard” and press your selection key
    2. Now choose the option “choose zip from sdcard”
    3. Navigate to the folder we just made “Flashable zips”
    4. In there select “Superuser-3.0.6-efgh-signed.zip”
    5. Now navigate to the option “Yes – Superuser-3.0.6-efgh-signed.zip”
    When it’s done flashing hit the “reboot system now” option.

    Now the 3G script is already included, and you might have noticed a 3G icon above the signal bars, though data still doesn't work. For this part of the tutorial I’d like to thank WarDrake who simplyfied this fix. I’m using his instructions and all credits go to him!!
    1. Open script manager and go navigate to : /etc/init.d
    2. In here select the script named 99enable3g and open it as a script
    3. Now click on the button "help" and select: run as root, run at boot, run on network change. (DO NOT RUN IT)
    4. Hit the “save” button.
    5. Exit script manager

    Once you’re done reboot your device and suddenly….

    AAMMMMGGG 3GG NETWORKKZZZ <3

    Thanks again to WarDrake for this amazing fix!

    If you followed my instructions correctly, you should be running Alpha 7! If it doesn't work you are probably one of The Almighty R’tards and you will have to start all over again, good luck.

    Now you’ve all noticed I used the same tutorial everytime, that’s because It’s easier for people to understand, and they will learn how to flash files by doing the same procedure over and over.

    Disclaimer,
    If you somehow managed to f*ck this up, go to hell and go f*ck yourself.
    Mods feel free to remove my disclaimer.

    Written by YBinnenweg(on forums & IRC)

    Please look through the F.A.Q before joining IRC and asking the same question over and over.
    F.A.Q
    Q: AAAMGG MIEE PHONE NO BOOOOOTTT?@!?!?!
    A: If you would have read the tutorial you would know that if your phone reboots into a blue recovery menu, you should FLASH THE ROM AGAIN.

    Q: My touchscreen doesn't work!
    A: Try reflashing the i9000 kernel, though if you are using a i9000b don't flash it.
    62
    Oke, seems some ppl can't play nice. Thread locked till OP send me a PM or he is ready for update.

    Past few days i had to clean the mess up. This has to stop.
    31
    Heads up:


    Well, system pushed to 350mb (old system + datadata size), i'll try to put together wifi and removed stuff on a single image.


    Cheers